3.3 Vdc • HCMOS/TTL • J -LEADED • PLASTIC MOLDED • SURFACE MOUNT CRYSTAL CLOCK OSCILLATORS ASML 14.0 x 8.95 x 4.7 mm FEATURES: • • • • Industry standard J-Leaded terminals. • Plastic molded SMD, Reflow capable. Low current consumption. • Tristate Enable / Disable. HCMOS output. • 3.3Vdc operation. Extended temperature -40°C to +85°C option. APPLICATIONS: • Provide clock signals for microprocessors and digital circuits. • Communication equipment, AV and OA equipment STANDARD SPECIFICATIONS Frequency Range 3.5SPECIFICATIONS MHz - 25 MHz PARAMETERS Operation Mode Fundamental, Frequency Range (Fo) 1MHz - AT 160MHz Operating Temperature -10°C to 60° C(See (See Options) Operating Temperature (TOPR) 0°C to ++70°C Options) Storage Temperature -55°C to + 125° C Storage Temperature (TSTO) - 40°C to +85°C Frequency Tolerance @ 25°C ± 50 ppm max. (See Options) Frequency Stability (DF/ Fo) ±100ppm max. (See Options) Frequency Stability over Temp. ± 50 ppm max. (See Options) Supply Voltage (Vdd) 3.3Vdc ±10% Equivalent Series Resistance 200 W for 3.5 MHz < F < 4.0 MHz ; 25mA max. (F < 70MHz) 10mA max. (F < 20MHz Input Current (I ) dd (ESR) Maximum 150 W for 4.0) MHz <F < 6.0 MHz 60mA max. (F < 160MHz) 100 W for 6.0 MHz < F < 10.0 MHz Duty Cycle or Symmetry 40 (See<Options) 80 / 60% W formax. 10 MHz F < 14.0 MHz _ 25 MHz 50 W for 14 MHz < F < Rise and Fall Times (TR / TF) 6ns max. Shunt Capacitance C 0 7 pF max. Output Load 2TTL, 15pF max. Load Capacitance 16 p F (See Output Voltage CL (VOH) 0.9 Option) *Vdd min. Drive Level 100 µW max. max. (VOL) 0.4Vdc @ 25° C First Year Aging ± 5 pp m10ms max. max. Start-up Time (TOSC) Insulation Resistance 500 M W min. at 100 Vdc ± > _15V 2.2V Tristate Function (VIH ) “1” or Open: Oscillation < 0.6V (VIL ) “0”: (Hi Z) Output disabled in high impedance Aging ±5ppm/ Year max. * Pin 1 has internal pull-up resistor which allows Pin 1 to be left floating (enable high) Test circuit, waveform, please see appendix B. Environmental and mechanical specifications, see appendix C. Group 2. Marking, see appendix G. Tape and Reel, see appendix H.(1,000 pcs./reel). A bypass capacitor 0.01 µF is required from Vdd to Gnd. Application notes, see appendix A. Reflow profile, see appendix E. ORDERING OPTIONS ASML - Frequency - Temperature - Frequency Stability - Duty Cycle - Packaging XX.XXXXX MHz -R for ± 25ppm max -K for ± 30ppm max -C for ± 50ppm max -D for -10°C to + 60°C -E for -20°C to + 70°C -F for -30°C to + 70°C -N for -30°C to + 85°C -L for -40°C to + 85°C ABRACON 48 -T (Tape & Reel) -S for 45 / 55% @ 1/ 2Vdd ® C O R P O R AT I O N Dimensions: Inches (mm) PIN N0. 1 2 3 4 FUNCTION Tristate Enable GND / Case Output Vdd NOTE: Left blank if standard • All specifications and markings subject to change without notice 29 Journey • Aliso Viejo, CA 92656 • USA (949) 448-7070 • F AX : (949) 448-8484 E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com ABRACON IS ISO 9001 / QS 9000 CERTIFIED