SHIELDED SMD CHIP POWER INDUCTOR ASPI-1367 Pb RoHS Compliant 14.0 x 12.9 x 6.7mm APPLICATIONS: FEATURES: • 100%lead (Pb) free. • Lowest DCR/uH, in this package size. • Frequency range up to 5.0MHZ. • Handles high transient current spikes without saturation • Ultra low buzz noise, due to composite construction. • PDA/Notebook/Desktop/Server applications. • Low profile, high current power supplies. • Battery powered devices. • DC/DC converter for Field Programmable Gate Array(FPGA) ELECTRICAL SPECIFICATIONS: ASPI-1367 -40˚C to +125˚C Less than +40˚C, 70% RH. ABRACON P/N: Operating Temperature: Storage Temperature: Part Number ASPI-1367R10 R33 2R2 3R3 4R7 5R6 6R8 8R2 100 L (µH) 0.1 0.33 2.2 3.3 4.7 5.6 6.8 8.2 10 Tolerance (M, N) N M M M M M M M M RDC (mΩ) Typ 0.25 0.6 3.8 5.5 9.5 10.5 13.5 15.2 17.0 RDC (mΩ) Max 0.5 0.8 4.2 6.8 11.2 11.5 14.9 16.6 18.5 Isat (A) 80.0 65.0 33.0 29.0 25.0 24.0 16.5 16.0 15.5 Irms (A) 60.0 46.0 20.0 15.0 13.5 12.0 11.5 10.5 10.0 Test Conditions 1. Inductance tested at 200kHz, 0.25V, 0A; Tolerance M=±20%, N=±30% 2. All test data is in reference to 25°C ambient. 3. Isat will cause the inductance value to drop approximately 30% 4. Irms will cause an approximate ΔT of 40°C 5. The part temperature (ambient + temp. rise) should not exceed 125°C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 6. Please contact Abracon for the availability of other inductance values. OPTIONS AND PART IDENTIFICATION ASPI-1367Inductance Code Please refer to the Electrical Spec Table Tolerance M: ±20% * N: ±30% * Packaging T: Tape and Reel (250pcs / reel) *N for 0.1µH *M for 0.33~10µH ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Revised: 04.04.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001 | www.abracon.com SHIELDED SMD CHIP POWER INDUCTOR ASPI-1367 Pb RoHS Compliant 14.0 x 12.9 x 6.7mm INDUCTANCE AND TEMPERATURE CURVE R33 OUTLINE DIMENSIONS: A B C 12.9 max. 14.0 max. 6.7 max. D 4.0±0.5 for L≤1.5uH 3.0±0.5 for L=2.2uH 4.7±0.3 for L＞2.2uH E F 8.4 ref. 2.0±0.5 Recommended Land Pattern G H I G H I 14.5 5.0 8.0 Dimension: mm ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Revised: 04.04.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001 | www.abracon.com SHIELDED SMD CHIP POWER INDUCTOR ASPI-1367 Pb RoHS Compliant 14.0 x 12.9 x 6.7mm REFLOW PROFILE: Profile Feature Average Ramp-Up Rate (Ts max to Tp) Assembly Preheat 150°C 200°C 60-180 seconds 3°C /second max. -Temperature Min (Ts min) -Temperature Max (Ts max) -Time (ts min to ts max) Time maintained above: -Temperature (TL) -Time (tL) 217°C 60-150 seconds Peak/Classification Temperature (Tp) Time within 5°C of actual Peak Temperature (tp) Ramp-Down Rate Time 25°C to Peak Temperature 245 +0°C 20-40 seconds 6°C/seconds max 8 minutes max. Storage Conditions and Handling o (1) Temperature and humidity conditions : less than 40 C and 70% RH. (2) Products should be used within 6 months. (3) The packaging material should be kept where no chlorine or sulfur exists in the air. (4) Do not touch the electrodes (soldering terminals) with fingers as this may lead to deterioration of solder ability (5) The use of tweezers or vacuum pick-ups is strongly recommended for individual components. (6) Bulk handling should ensure that abrasion and mechanical shock are minimized. TAPE & REEL: T= tape and reel (250pcs/reel) A0 13.2 A 330 B 100 C 13.5 D 24 B0 13.9 K0 7.0 Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Revised: 04.04.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001 | www.abracon.com