ASPI-0310FS

ULTRA LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR
ASPI-0310FS
3.0 x 3.0 x 1.0mm
Compliant
APPLICATIONS:
FEATURES:
•
•
•
•
•
RoHS
Pb
• Mobile phones
• MP3 & 4 and other portable communication equipment
• Digital cameras.
Small size and low profile: 1.0mm
Small DCR and high rated current
High reliability to mechanical stress
Magnetically shielded by magnetic powder molding
Suitable for RoHS reflow profile
ELECTRICAL SPECIFICATIONS:
Abracon P/N:
Operating Temperature & Humidity
:
Storage Temperature & Humidity:
Part Number
Inductance
Units
Symbol
ASPI-0310FS-1R0
ASPI-0310FS-1R2
ASPI-0310FS-1R5
ASPI-0310FS-2R2
ASPI-0310FS-3R3
ASPI-0310FS-4R7
ASPI-0310FS-6R8
ASPI-0310FS-100
ASPI-0310FS-150
ASPI-0310FS-220
ASPI-0310FS-330
ASPI-0310FS-470
μH
L
1.0
1.2
1.5
2.2
3.3
4.7
6.8
10.0
15.0
22.0
33.0
47.0
ASPI-0310FS Series
-25°C to +120°C (Including self generated heat)
-10°C to +40°C, 30% to 70% RH
Inductance
Tolerance
%
M, N
N
N
N
M
M
M
M
M
M
M
M
M
DCR
Tolerance
%
DCR
mΩ
DCR
50
62
70
80
130
175
260
350
510
780
1100
1600
±25%
±30%
±20%
Saturation
Current
A
Isat
2.30
1.90
1.65
1.45
1.05
0.85
0.70
0.60
0.50
0.40
0.32
0.28
Temperature
Rise Current
A
Irms
2.30
2.10
2.00
1.90
1.80
1.70
1.30
0.90
0.80
0.70
0.50
0.35
Test Conditions
1. Inductance is measured in HP-4285A Precision LCR Meter.
2. RDC is measured in DU-5011 milli ohm meter.(or equivalent).
3. Isat : Based on inductance change ( L/Lo : ≤ -30%)
4. Irms : Based on temperature rise ( T : 40oC TYP. )
5. Test Freq: 100KHz, 1Vrms
OPTIONS AND PART IDENTIFICATION
ASPI-3010FSInductance Code
Please refer to the
Electrical Spec Table
Tolerance
N: ±30%*
M: ±20%*
Packaging
T2: Tape and Reel (2kpcs / reel)
*N for L = 1.0 ~ 1.5µH
*M for L = 2.2 ~ 47µH
ABRACON IS
ISO9001:2008
CE RTIFIED
、
Revised: 11.21.11
Visit www.abracon.com for Terms & Conditions of Sale
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
ULTRA LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR
ASPI-0310FS
Pb
RoHS
3.0 x 3.0 x 1.0mm
Compliant
OUTLINE DRAWING:
Mechanical and Material Information 1 (Effective date: 11/10/2011)
Circuit Schematic
A
B
C Max.
3.0±0.1
3.0±0.1
1.0
Recommended Land Pattern
No Polarity
Dimension: mm
Materials
No
1
2
3
4
ABRACON IS
ISO9001:2008
CE RTIFIED
Part Name
Ferrite core
Terminals
Coil
Adhesive
Magnetic Powder
、
Material
Ni-Zn Ferrite
Ag/Ni/Sn
Cu/P180 Grd 1
Silicon Base Resin
Ni-Zn Ferrite
Revised: 11.21.11
Visit www.abracon.com for Terms & Conditions of Sale
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
ULTRA LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR
ASPI-0310FS
Pb
RoHS
Compliant
3.0 x 3.0 x 1.0mm
TAPE & REEL:
T2: 2,000pcs / reel
A
3.15
B
3.15
K
1.40
F
4
T
0.25
Dimension: mm
REFLOW PROFILE:
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive
Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written
consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
、
Revised: 11.21.11
Visit www.abracon.com for Terms & Conditions of Sale
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com