LOW PROFILE HIGH CURRENT SMD SHIELDED POWER INDUCTOR ASPI-1338 Pb RoHS Compliant 12.9 x 13.8 x 3.8mm | | | | | | | | | | | | | APPLICATIONS: FEATURES: • 100% lead (Pb) free. • Lowest DCR/uH, in this package size. • Frequency range up to 5.0MHZ. • Handles high transient current spikes without saturation • Ultra low buzz noise, due to composite construction. • PDA/Notebook/Desktop/Server applications. • Low profile, high current power supplies. • Battery powered devices. • DC/DC converter for Field Programmable Gate Array(FPGA) STANDARD SPECIFICATIONS: PARAMETERS ABRACON P/N: Operating temperature: Storage temperature: ASPI-1338 xxxx -40˚C to +125˚C Less than +40˚C, and 70% RH Key Electrical Specifications @25oC Part Number Units Symbol ASPI-1338-R22 ASPI-1338-8R2 Inductance @ 0A μH L 0.22 8.2 Tolerance Test Freq DCR Typ DCR Max % N, M N M kHz mΩ mΩ 200 200 0.75 26.5 1.3 31 Saturation Current A Isat* 65.0 13.5 Temperature Rise Current A Irms* 38.5 8.0 Contact ABRACON for other values available. Test Conditions 1. Inductance tested at 200kHz, 0.25V, 0A; Tolerance M=±20%, N=±30% 2. All test data is in reference to 25°C ambient. 3. Isat will cause the inductance value to drop approximately 30% 4. Irms will cause an approximate ΔT of 40°C 5. The part temperature (ambient + temp. rise) should not exceed 125°C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 6. Please contact Abracon for the availability of other inductance values. OPTIONS AND PART IDENTIFICATION: (Left blank if standard) ASPI-1338Inductance Code Please refer to the Electrical Spec Table Tolerance M: ±20% * N: ±30% * Packaging T: Tape and Reel (500pcs / reel) *N for 0.22µH *M for 8.2µH ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CE RTIFIED Revised: 04.12.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | | LOW PROFILE HIGH CURRENT SMD SHIELDED POWER INDUCTOR ASPI-1338 Pb RoHS Compliant 12.9 x 13.8 x 3.8mm | | | | | | | | | | | | | ELECTRICAL CHARACTERISTIC CURVES ASPI-1338-R22 DC current L(0.22uH) ΔT( oC) 0A 0.214 0.00 10A 0.206 0.70 20A 0.200 3.70 30A 0.196 12.60 38.5A 0.194 21.00 40A 0.190 25.40 50A 0.183 39.40 60A 0.179 54.00 65A 0.177 69.40 70A 0.171 86.80 80A 0.168 103.0 ASPI-1338-8R2 DC current L(8.2uH) ΔT( oC) 0A 8.117 0.00 2A 8.05 0.50 4A 7.894 5.40 6A 7.707 15.50 8A 7.475 34.20 10A 7.228 63.40 12A 6.951 103.8 13.5A 6.741 112.4 OUTLINE DRAWING: Recommended Land Pattern A Max B Max C Max 12.9 14.0 3.8 D 4.0±0.5 for ASPI-1338-R22 4.7±0.3 for ASPI-1338-8R2 E Ref F G H I 8.4 2.0 14.5 5.0 8.0 G 14.5 H 5.0 I 8.0 Dimension: mm ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CE RTIFIED Revised: 04.12.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | | LOW PROFILE HIGH CURRENT SMD SHIELDED POWER INDUCTOR ASPI-1338 Pb RoHS Compliant 12.9 x 13.8 x 3.8mm | | | | | | | | | | | | | | | REFLOW PROFILE: Profile Feature Assembly Average Ramp-Up Rate (Ts max to Tp) 3°C /second max. Preheat 150°C 200°C 60-180 seconds -Temperature Min (Ts min) -Temperature Max (Ts max) -Time (ts min to ts max) Time maintained above: -Temperature (TL) -Time (tL) Peak/Classification Temperature (Tp) 217°C 60-150 seconds 245+0°C Time within 5°C of actual Peak Temperature (tp) Ramp-Down Rate Time 25°C to Peak Temperature 6°C/seconds max 8 minutes max. 20-40 seconds Storage Conditions and Handling (1) Temperature and humidity conditions : less than 40oC and 70% RH. (2) Products should be used within 6 months. (3) The packaging material should be kept where no chlorine or sulfur exists in the air. (4) Do not touch the electrodes (soldering terminals) with fingers as this may lead to deterioration of solder ability (5) The use of tweezers or vacuum pick-ups is strongly recommended for individual components. (6) Bulk handling should ensure that abrasion and mechanical shock are minimized. TAPE & REEL: T: 500pcs/Reel A 330 B 100 C 13.5 D 24 Ao 13.2 Bo 13.8 Ko 4.0 I Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CE RTIFIED Revised: 04.12.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com