PRODUCT SPECIFICATION HDM128GS24L-1 240 x 128 MONOCHROME GRAPHICS LCD DISPLAY MODULE HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: ZW REV.: SHEET 1 OF 14 1.0 HDM128GS24L-1 DATE: 12/10/07 .General Specifications 1.The Features (1). Low power consumption 5.0V power supply (2). 1/128 duty,1/13 bias (3). Viewing direction: 6:00 -20~70 û C (4). Operating tempration: (5). Storage tempration: (6). Display type: STN -30~85 û C , Negative 2.Mechanical Data and Conditions: (1) Number of Characters------------ 240 Dots * 128 Dots Graphic LCD Module (2) Module Size---------------------------170.0 w * 101.5 h mm (3) Viewing Area ------------------------ 128.0 w * 74.0 h mm (4) Dot Size ----------------------------0.47 w * 0.47 h (5) Dot Pitch mm -----------------------0.50 w * 0.50 h mm (6) Outline Dimensions------------------See Attached Drawing 3. Absolute Maximum Ratings Characteristics Supply Voltage Input Voltage HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. Symbol Ratings VDD -0.3V to +7.0V V IN -0.3V to Vdd+0.3V REV.: 1.0 SHEET 2 OF 14 HDM128GS24L-1 DATE: 12/10/07 4. Electrical Characteristics Dc Characteristics Test Conditions(Unless otherwise noted, Vss=0V, VDD=5.0V± 10% Item Symbol Operating Voltage Test Conditions , IMN TYP MAX Unit Pin Name VDD 4.5 5.0 5.5 V VDD H Level VIH Vdd-2.2 VDD V Input Pins L Level VIL 0 0.8 V Input Pins H Level VOH VDD-0.3 VDD V Output Pins L Level VOL 0 0.3 V Output Pins H Level ROH VOUT=VDD-0.5V 400 Ohm Output Pins L Level ROL VOUT=0.5V 400 Ohm Output Pins 200 K Ohm 5.5 MHZ Input Output Output Input Pull-Up RPU 50 100 (Note 1) Resistance Operating Fosc 0.4 Frequency (Note 1) Applied /T1. /T2 /RESET (Note 2) MDS=L, MD0=L, MD1=L, MD2=H, MD3=H, FS0=L, FS1 =L, /SDSEL=L, /DUAL=H, D7 to D0=LHLHLHLH HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. REV.: 1.0 SHEET 3 OF 14 HDM128GS24L-1 DATE: 12/10/07 5.Pin Connections: PIN NO. SYMBOL FUNCTION 1 FG FRAME GROUND(0V) 2 VSS GROUND 3 VDD POWER SUPPLY FOR LOGIC 4 VL POWER SUPPLY FOR LCD DRIVING 5 WR WRITE SIGNAL 6 RD READ SIGNAL 7 CE CHIP ENABLE SIGNAL 8 C/D H: INSTRUCTION CODE, L: DATA 9 N/C NO CONNECTION 10 RESET RESET SIGNAL 11-18 DB0-DB7 DATA INPUT/OUTPUT 19 FS1 PINS FOR SELECTION OF FONT DISPLAY DATA REVERSE RV=H: REVERSE DISPLAY 20 HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 RV Q.A.: Z.W. RV=L: NORMAL DISPLAY REV.: 1.0 SHEET 4 OF 14 HDM128GS24L-1 DATE: 12/10/07 6.AC Characteristics Switching Characteristics (1) tCWH SCP Tr tf tCWL tLHD tDSU tDHD LP tLSU DATA td FR CDATA tCSU tCHD Test conditions(uniess otherwise noted,VDD=5.0V± 10%,VSS=0) Item Symbol Min. Typ. Max. Operating frequency f scp Unit -- -- 2.75 MHZ 150 -- -- ns SCP pulse width t CWH, tCWL SCP rise/fall time t r,tf -- -- 30 ns LP set-up time t LSU 150 -- 290 ns LP hold time t LHD 5 -- 40 ns Data set-up time t DSU 170 -- -- ns Data hold time t DHD 80 -- -- ns FR delay time td 0 90 ns CDATA set-up time t CSU 450 850 ns CDATA hold time T CHD 450 950 ns HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. REV.: 1.0 SHEET 5 OF 14 HDM128GS24L-1 DATE: 12/10/07 Switching characteristics(2) Bustiming C/D tCDS tCDH CE tCE, tRD tWR RD,WR tDS D0 TO D7 (WRITE) tDH D0 TO D7 (READ) tACC tOH Test Conditions (Unless otherwise noted VDD=5.0 V ± 10%, VSS=0V) Item Symbol Min. Typ. Max. Unit C/D Set-up Time t CDS 100 -- -- nS C/D Hold Time t CDH 10 -- -- nS t CE,tRD, tWR 80 -- -- nS Data Set-up Time t DS 80 -- -- nS Data Hold Time t DH 40 -- -- nS t ACC -- -- 150 nS t OH 10 -- 50 nS /CE,/RD,/WR Pulse Width Access Time Output Hold Time HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. REV.: 1.0 SHEET 6 OF 14 HDM128GS24L-1 DATE: 12/10/07 Switching characteristics (3) (1) External RAM read mode CLOCK(XI) ad0 to ad15 td1 td1 ce Td2 td3 r/w d0 to d7 TDS tDH (2) External RAM write mode CLOCK(XI) ad0 to ad15 td1 td1 ce td4 td5 r/w td6 td7 d0 to d7 td8 HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 td9 Q.A.: Z.W. REV.: 1.0 SHEET 7 OF 14 HDM128GS24L-1 DATE: 12/10/07 Test Conditions (Unless otherwise noted ,VDD=5.0 V± 10%, VSS=0) Item Symbol Min. Typ. Max. Unit Address delay time t d1 -- -- 250 nS ce fall delay time(read) t d2 -- -- 180 nS ce rise delay time(read) t d3 -- -- 180 nS Data set-up time t DS 0 -- -- nS Data hold time t DH 30 -- -- nS ce fall delay time(write) t d4 -- -- 200 nS ce rise delay time(write) t d5 -- -- 200 nS r/w fall delay time t d6 180 nS r/w rise delay time t d7 180 nS Data stable time t d8 450 nS Data hold time t d9 200 nS 7. Power Supply: VDD +5V VLCD+0.7V LCM VSS VO RL Vee -12.8 V HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. REV.: 1.0 SHEET 8 OF 14 HDM128GS24L-1 DATE: 12/10/07 .The Characteristics and Reliability Test 1.Electro-Optic Characteristics: NO Item 1 Supply Voltage(Logic) 2 3 4 5 6 Condition:TEMP=(23± 3) û C 3) Min Typ. Max Unit Condition 4.5 5.0 5.5 V 18.2 V -20 ûC 17.8 V 25 ûC 17.4 V 70 ûC 188 ms 132 ms Symbol Vdd-Vss LCD Operating Voltage Vdd-V 0 Ton Toff CR ñ1 ñ2 ñ3 ñ4 Vth Response Time Contrast 12H 6H Viewing Angel 3H 9H LCD Threshold Voltage 2 56 66 60 60 16.8 Deg. (CR>2.0) 25 ûC V 2. Characteristics of backlight Item Forward Voltage Forward Current Reverse Voltage Reverse Current Power Dissipation Color Symbol VF IF VR IR PD Min. 2.9 Typ 3.2 240 . Max. 3.5 5.0 10 768 Unit V mA V uA mW Condition IF=240mA EACH CHIP IF=240mA WHITE WARNING: A BACKLIGHT IS A KIND OF CURRENT DEVICE,IT MUST CONNECT A RESISTANCE FOR LIMITING CURRENT ,OR IT WILL BE DAMAGED. HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. REV.: 1.0 SHEET 9 OF 14 HDM128GS24L-1 DATE: 12/10/07 2.Reliability Test No Items Test Condition Temp:85 ± 2 û C Time:96h Restore:24h Tenny Passed Low Temp Storage Temp:-30 ± 3 û C Time:96h Restore:24h Tenny Passed Tenny Passed Tenny Passed Tenny Passed 2 4 5 Test Result High Temp Storage 1 3 Equipment Temp:7 0 ± 2 û C Vop:5V Time:24h Restore:24h Low Temp Temp:-20 ± 3 û C Static drive Vop:5V Time:24h Restore:24h High Temp High Temp:40 ± 2 û C Hum Storage Hum:95%Rh Time:96h Restore:24h Thermal Temp: ( û C ) Shock 85 High Temp Static drive 25 -30 6 HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. 30 5 30 5 Cycles Restore:24h 5 REV.: 1.0 Passed Tenny SHEET 10 OF 14 HDM128GS24L-1 DATE: 12/10/07 The Equipment and LCD Measuring Method 1. Equipment Oscilloscope Waveform Generator (2) Definition a. Threshold Voltage (Vth) Brightness 100% 90% Selected waveforms Vth 0 HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. Drive Voltage REV.: 1.0 SHEET 11 OF 14 HDM128GS24L-1 DATE: 12/10/07 b. Response Time On Off 90% Time 10% Tr Td a.Viewing Angle: Z Í1 9H,¿ =180 û ,Y 1 2H, ¿=90û Í3 ! Í 4 Í 2 3H, ¿ = 0û X, 6H, ¿ =270 û b.Contrast Ratio (positive) CR= Brightness of non-selected wave-form Brightness of selected wave-form 4. Reliability Test: Equipment : Tenny HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. REV.: 1.0 SHEET 12 OF 14 HDM128GS24L-1 DATE: 12/10/07 . Attach Drawing 130.0 10.0 metal cover JS T PH R -3 ?5.0 HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. REV.: 1.0 SHEET 13 OF 14 HDM128GS24L-1 DATE: 12/10/07 HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: Z.W. REV.: 1.0 SHEET 14 OF 14 HDM128GS24L-1 DATE: 12/10/07