1N4001 THRU 1N4007 GENERAL PURPOSE SILICON RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere FEATURES DO-41 ◆The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ◆Construction utilizes void-free molded plastic technique ◆Low reverse leakage ◆High forward surge current capability ◆High temperature soldering guaranteed: 250℃/10 seconds,0.375”(9.5mm) lead length,5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-41 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.012 ounce, 0.33 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. 1N 1N 1N 1N SYMBOLS 4001 4002 4003 4004 Maximum repetitive peak reverse voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum average forward rectified current VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 1N 4005 1N 4006 1N 4007 UNITS 600 420 600 800 560 800 1000 700 1000 VOLTS VOLTS VOLTS I(AV) 1.0 Amp IFSM 30.0 Amps Maximum instantaneous forward voltage at 1.0A VF Volts Maximum DC reverse current TA=25℃ IR CJ 1.1 5.0 50.0 15.0 RθJA 50.0 ℃/W TJ,TSTG -65 to +175 ℃ 0.375”(9.5mm) lead length at TA=75℃ Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at rated DC blocking voltage TA=100℃ Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction and storage temperature range uA pF Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2.Thermal resistance from junction to ambient at 0.375” (9.5mm)lead length,P.C.B. mounted Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 1N4001 THRU 1N4007 RATINGS AND CHARACTERISTIC CURVES 1N4001 THRU 1N4007 Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2