HD74LVC14 Hex Schmitt-trigger Inverters REJ03D0345-0400 Rev.4.00 Nov 01, 2007 Description The HD74LVC14 has six schmitt trigger inverters in a 14 pin package. Low voltage and high-speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • • • • • • VCC = 2.0 V to 5.5 V All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±24 mA (@VCC = 3.0 V to 5.5 V) Ordering Information Part Name Package Type HD74LVC14FPEL SOP–14 pin (JEITA) HD74LVC14TELL TSSOP–14 pin Note: Package Code (Previous Code) PRSP0014DF-B (FP–14DAV) PTSP0014JA-B (TTP–14DV) Package Abbreviation Taping Abbreviation (Quantity) FP EL (2,000 pcs/reel) T ELL (2,000 pcs/reel) Please consult the sales office for the above package availability. Function Table Input A L H H: L: High level Low level REJ03D0345-0400 Rev.4.00 Nov 01, 2007 Page 1 of 5 Output Y H L HD74LVC14 Pin Arrangement 1A 1 14 VCC 1Y 2 13 6A 2A 3 12 6Y 2Y 4 11 5A 3A 5 10 5Y 3Y 6 9 4A GND 7 8 4Y (Top view) Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage range Input diode current Input voltage VCC IIK VI V mA V VI = –0.5 V Output diode current IOK –0.5 to 6.0 –50 –0.5 to 6.0 –50 50 –0.5 to VCC+0.5 ±50 100 –65 to +150 mA VO = –0.5 V VO = VCC+0.5 V Output voltage Output current VCC, GND current / pin Storage temperature Note: VO IO ICC or IGND Tstg Conditions V mA mA °C The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Supply voltage Input / Output voltage Operating temperature Symbol VCC VI VO Ta IOH Output current IOL Notes: 1. Duty cycle ≤ 50% REJ03D0345-0400 Rev.4.00 Nov 01, 2007 Page 2 of 5 Ratings 1.5 to 5.5 2.0 to 5.5 0 to 5.5 0 to VCC –40 to 85 –12 –24*1 12 24*1 Unit V V Conditions Data retention At operation A Y °C mA mA VCC = 2.7 V VCC = 3.0 V to 5.5 V VCC = 2.7 V VCC = 3.0 V to 5.5 V HD74LVC14 Electrical Characteristics Item Symbol VT+ 5.5 2.7 3.0 3.6 4.5 1.4 0.3 0.4 0.4 0.4 2.4 1.1 1.2 1.2 1.2 5.5 2.7 to 5.5 2.7 3.0 3.0 0.4 VCC–0.2 2.2 2.4 2.0 1.2 — — — — IIN ICC 4.5 2.7 to 5.5 2.7 3.0 4.5 0 to 5.5 5.5 3.8 — — — — — — — 0.2 0.4 0.55 0.55 ±5.0 20 µA µA ∆ICC 3.0 to 3.6 — 500 µA VH Output voltage VOL Test Conditions V 3.0 1.4 1.5 1.8 2.0 VOH Quiescent supply current Unit 2.0 0.4 0.6 0.8 1.0 VT– Input current 2.7 3.0 3.6 4.5 Ta = –40 to 85°C Min Max 1.0 2.0 1.2 2.2 1.5 2.4 1.6 2.6 5.5 2.7 3.0 3.6 4.5 Threshold voltage Hysteresis voltage VCC (V) V V V V + VT – VT – IOH = –100 µA IOH = –12 mA IOH = –12 mA IOH = –24 mA IOH = –24 mA IOL = 100 µA IOL = 12 mA IOL = 24 mA IOL = 24 mA VIN = 5.5 V or GND VIN = VCC or GND VIN = one input at (VCC–0.6)V, other inputs at VCC or GND Switching Characteristics Item Propagation delay time Input capacitance Output capacitance Symbol tPLH tPHL CIN CO Unit From (Input) To (Output) 9.5 8.5 ns A Y 7.0 — — pF pF VCC (V) Ta = –40 to 85°C Min Typ Max 2.7 3.3±0.3 — 1.5 6.0 5.0 5.0±0.5 2.7 2.7 — — — 3.5 3.0 15.0 REJ03D0345-0400 Rev.4.00 Nov 01, 2007 Page 3 of 5 HD74LVC14 Test Circuit VCC Input Pulse Generator Output Zout = 50 Ω 450 Ω CL = 50 pF Notes: 50 Ω Scope 1. CL includes probe and jig capacitance. Waveforms tr tf 90 % Input A VIH 90 % Vref Vref 10 % 10 % t PHL GND t PLH VOH Output Y Vref Vref VOL TEST VIH Vref Notes: 1. tr = 2.5 ns, tf = 2.5 ns 2. Input waveform : PRR = 10 MHz, duty cycle 50%. REJ03D0345-0400 Rev.4.00 Nov 01, 2007 Page 4 of 5 VCC = 2.7 V, 3.3±0.3 V VCC = 5.0±0.5 V 2.7 V VCC 1.5 V 50%VCC HD74LVC14 Package Dimensions JEITA Package Code P-SOP14-5.5x10.06-1.27 RENESAS Code PRSP0014DF-B *1 Previous Code FP-14DAV MASS[Typ.] 0.23g D F 14 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. 8 c *2 E HE bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 7 e Z *3 bp x Reference Dimension in Millimeters Symbol M A L1 A1 θ y L Detail F JEITA Package Code P-TSSOP14-4.4x5-0.65 RENESAS Code PTSP0014JA-B *1 Previous Code TTP-14DV D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 7.50 7.80 8.00 1.27 0.12 0.15 1.42 0.50 0.70 0.90 1.15 MASS[Typ.] 0.05g D F 14 8 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. HE c *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) Reference Dimension in Millimeters Symbol 7 1 *3 Z bp x M L1 A e A1 θ L y Detail F REJ03D0345-0400 Rev.4.00 Nov 01, 2007 Page 5 of 5 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 5.00 5.30 4.40 0.03 0.07 0.10 1.10 0.15 0.20 0.25 0.10 0.15 0.20 0° 8° 6.20 6.40 6.60 0.65 0.13 0.10 0.83 0.4 0.5 0.6 1.0 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2007. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.0