RENESAS HD74LV1GT66ACME

HD74LV1GT66A
Analog Switch
REJ03D0121-0800
Rev.8.00
Mar 21, 2008
Description
The HD74LV1GT66A has an analog switch in a 5 pin package. Switch section has its enable input control (C). Highlevel voltage applied to C turns on the switch section. Applications include signal gating, chopping, modulation, or
demodulation (modem), and signal multiplexing for analog to digital and digital to analog conversion systems. Low
voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low
power consumption extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• Control input is TTL compatible input level.
Supply voltage range : 3.0 to 5.5 V
Operating temperature range : –40 to +85°C
• Control inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
• Control inputs have hysteresis voltage for the slow transition.
• Ordering Information
Part Name
Package Type
HD74LV1GT66ACME
CMPAK–5 pin
HD74LV1GT66AVSE
VSON–5 pin
Note:
Package Code
(Previous Code)
PTSP0005ZC-A
(CMPAK-5V)
PUSN0005KA-A
(TNP-5DV)
Package
Abbreviation
Taping Abbreviation
(Quantity)
CM
E (3000 pcs/reel)
VS
E (3000 pcs/reel)
Please consult the sales office for the above package availability.
Outline and Article Indication
• HD74LV1GT66A
Index band
Marking
T
CMPAK–5
REJ03D0121-0800 Rev.8.00, Mar 21, 2008
Page 1 of 8
9
= Control code
HD74LV1GT66A
Outline and Article Indication
• HD74LV1GT66A
Marking
T
9
= Control code
VSON–5
Function Table
Control
L
H
Switch
OFF
ON
H : High level
L : Low level
Pin Arrangement
IN/OUT 1
5
VCC
OUT/IN 2
GND
4 Control
3
(Top view)
REJ03D0121-0800 Rev.8.00, Mar 21, 2008
Page 2 of 8
HD74LV1GT66A
Absolute Maximum Ratings
Item
Supply voltage range
Input voltage range *1
Output voltage range *1, 2
Input clamp current
Output clamp current
Continuous output current
Continuous current through
VCC or GND
Maximum power dissipation
*3
at Ta = 25°C (in still air)
Storage temperature
Notes:
Symbol
VCC
VI
VO
IIK
IOK
IO
Ratings
–0.5 to 7.0
–0.5 to 7.0
–0.5 to VCC + 0.5
–20
±50
±25
Unit
V
V
V
mA
mA
mA
ICC or IGND
±50
mA
PT
200
mW
Tstg
–65 to 150
°C
Test Conditions
Output : H or L
VI < 0
VO < 0 or VO > VCC
VO = 0 to VCC
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two
of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are
observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Recommended Operating Conditions
Item
Supply voltage range
Input voltage range
Input / output voltage range
Symbol
VCC
VI
VI/O
Input transition rise or fall rate
∆t / ∆v
Operating free-air temperature
Ta
Note:
Min
3.0
0
0
0
0
–40
Unused or floating control inputs must be held high or low.
REJ03D0121-0800 Rev.8.00, Mar 21, 2008
Page 3 of 8
Max
5.5
5.5
VCC
100
20
85
Unit
V
V
V
ns / V
°C
Conditions
VCC = 3.0 to 3.6 V
VCC = 4.5 to 5.5 V
HD74LV1GT66A
Electrical Characteristics
Item
Symbol
VIH
Input voltage
VIL
Hysteresis
voltage
VH
On-state switch
resistance
RON
Peak on
resistance
RON (P)
Off-state switch
leakage current
VCC (V)
3.0 to 3.6
4.5 to 5.5
3.0 to 3.6
4.5 to 5.5
3.3
5.0
3.0
Min
—
—
—
—
—
—
—
Ta = 25°C
Typ
Max
—
—
—
—
—
—
—
—
—
—
—
—
50
150
Ta = –40 to 85°C
Min
Typ
Max
1.5
—
—
2.0
—
—
—
—
0.6
—
—
0.8
—
0.10
—
—
0.15
—
—
—
190
4.5
—
40
75
—
—
100
3.0
—
100
180
—
—
225
Unit
V
Control input only
V
VT+ – VT–
Ω
VIN = VCC or GND
VC = VIH
IT = 1 mA
Ω
VIN = VCC to GND
VC = VIH
IT = 1 mA
VIN = VCC, VOUT = GND
or VIN = GND,
VO = VCC, VC = VIL
4.5
—
50
100
—
—
125
Is (OFF)
5.5
—
—
±0.1
—
—
±1.0
µA
Is (ON)
5.5
—
—
±0.1
—
—
±1.0
µA
IIN
ICC
∆ICC
0 to 5.5
5.5
5.5
—
—
—
—
—
—
±0.1
—
—
—
—
—
—
—
—
±1.0
10
1.5
µA
µA
mA
CIC
—
—
3.5
—
—
—
—
pF
Switch terminal
capacitance
CIN / OUT
—
—
4.0
—
—
—
—
pF
Feed through
capacitance
CIN–OUT
—
—
0.5
—
—
—
—
pF
On-state switch
leakage current
Input current
Quiescent
supply current
Control input
capacitance
Test Conditions
VIN = VCC or GND
VC = VIH
VIN = 5.5 V or GND
VIN = VCC or GND
VIN = 3.4 V
Switching Characteristics
• VCC = 3.3 ± 0.3 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Propagation
delay time
tPLH
tPHL
Min
—
—
Typ
1.5
4.0
Max
6.0
9.0
Min
—
—
Max
10.0
12.0
Enable time
tZH
tZL
—
—
4.0
6.0
11.0
18.0
—
—
Disable time
tHZ
tLZ
—
—
5.0
8.0
11.0
18.0
—
—
Unit
Test
Conditions
FROM
(Input)
TO
(Output)
ns
CL = 15 pF
CL = 50 pF
IN/OUT
or OUT/IN
OUT/IN
or IN/OUT
15.0
22.0
ns
CL = 15 pF
CL = 50 pF
C
IN/OUT
or OUT/IN
15.0
22.0
ns
CL = 15 pF
CL = 50 pF
C
IN/OUT
or OUT/IN
FROM
(Input)
TO
(Output)
• VCC = 5.0 ± 0.5 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Propagation
delay time
tPLH
tPHL
Min
—
—
Typ
1.0
3.0
Max
4.0
6.0
Min
—
—
Max
7.0
8.0
Enable time
tZH
tZL
—
—
3.0
5.0
7.0
12.0
—
—
Disable time
tHZ
tLZ
—
—
4.0
6.0
7.0
12.0
—
—
REJ03D0121-0800 Rev.8.00, Mar 21, 2008
Page 4 of 8
Unit
Test
Conditions
ns
CL = 15 pF
CL = 50 pF
IN/OUT
or OUT/IN
OUT/IN
or IN/OUT
10.0
16.0
ns
CL = 15 pF
CL = 50 pF
C
IN/OUT
or OUT/IN
10.0
16.0
ns
CL = 15 pF
CL = 50 pF
C
IN/OUT
or OUT/IN
HD74LV1GT66A
Operating Characteristics
• CL = 50 pF
Item
Power dissipation
capacitance
Symbol
VCC (V)
CPD
5.0
Min
Ta = 25°C
Typ
Max
—
4.0
—
Unit
pF
Test Conditions
f = 10 MHz
Test Circuit
• RON
VCC
VC =VIH
VCC
VIN =VCC
(ON)
R ON =
VOUT
VIN–OUT
10 –3
GND
1.0 mA
+
(Ω)
−
V
VIN – VOUT
• IS(off), IS(on)
VCC
VCC
VC =VIL
VC =VIH
VCC
A
VIN =VCC
or GND
VCC
A
(OFF)
GND
REJ03D0121-0800 Rev.8.00, Mar 21, 2008
Page 5 of 8
VOUT =GND
or VCC
VIN =VCC
or GND
(ON)
GND
VOUT
OPEN
HD74LV1GT66A
• tPLH, tPHL
tr
VCC
VC =VIH
VI
90% 90%
Vref
Vref
VIN
10%
tf
10%
t PHL
t PLH
VCC
VIN
VOUT
CL=
15 or 50 pF
(ON)
GND
VOUT
50%
GND
VOH
50%
VOL
VCC (V)
INPUTS
Vref
tr / tf
VI
3.3±0.3 2.5 V ≤ 3.0 ns 50%
5.0±0.5 3 V ≤ 3.0 ns 1.5 V
Notes:
1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω.
2. The output are measured one at a time with one transition per measurement.
• tZH, tZL / tHZ, tLZ
VCC
tr
VC
S1
VIN
R L=
1kΩ
VCC
GND
Item
t ZH
t ZL
t HZ
t LZ
S1
VCC
GND
VCC
GND
VOUT
CL=15 or
50 pF
S2
VC
10%
tf
90%
Vref
R L=
waveform–A
50%
1kΩ
VOUT
t ZL
waveform–B
10%
VOH –0.3 V
VCC (V)
50%
VCC
VOL +0.3 V
INPUTS
VI
tr / tf
Vref
3.3±0.3 2.5 V ≤ 3.0 ns 50%
5.0±0.5 3 V ≤ 3.0 ns 1.5 V
Notes:
1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω.
2. Waveform–A is for an output with internal conditions such that the output is low
except when disabled by the output control.
3. Waveform–B is for an output with internal conditions such that the output is high
except when disabled by the output control.
4. The output are measured one at a time with one transition per measurement.
REJ03D0121-0800 Rev.8.00, Mar 21, 2008
Page 6 of 8
VOH
GND
t LZ
GND
VCC
GND
VCC
GND
t HZ
t ZH
S2
VI
90%
Vref
VOL
HD74LV1GT66A
• CIN/OUT, CIN-OUT
CIN–OUT
VC =GND
VCC
VCC
(OFF)
CIN/OUT
REJ03D0121-0800 Rev.8.00, Mar 21, 2008
Page 7 of 8
GND
CIN/OUT
HD74LV1GT66A
Package Dimensions
JEITA Package Code
RENESAS Code
SC-88A
Previous Code
PTSP0005ZC-A
MASS[Typ.]
CMPAK-5 / CMPAK-5V
D
0.006g
A
e
Q
c
E
HE
LP
L
A
A
x M
L1
S
Reference
Symbol
A3
b
A
A
A1
A2
A3
b
b1
c
c1
D
E
e
e
A2
A
A1
y S
S
e1
HE
L
L1
LP
x
y
b
b1
l1
c1
c
b2
A-A Section
JEITA Package Code
P-USON5-1.2x1.6-0.50
Pattern of terminal position areas
RENESAS Code
PUSN0005KA-A
Previous Code
TNP-5D/TNP-5DV
Dimension in Millimeters
Min
0.8
0
0.8
0.15
0.1
1.8
1.15
1.8
0.3
0.1
0.2
Nom
0.9
0.25
0.22
0.2
0.13
0.11
2.0
1.25
0.65
2.1
b2
e1
1.5
l1
Q
0.25
Max
1.1
0.1
1.0
0.3
0.15
2.2
1.35
2.4
0.7
0.5
0.6
0.05
0.05
0.35
0.9
MASS[Typ.]
0.002g
D
L1
1.0 ±0.1
4
( 0.1 )
HE
E
( 0.1 )
5
1
3
A
c
e
b
REJ03D0121-0800 Rev.8.00, Mar 21, 2008
Page 8 of 8
Reference Dimension in Millimeters
Symbol
D
E
A
A1
A2
b
b1
e
Lp
x
y
ZD
c
c1
HE
L1
Min Nom Max
1.55 1.6 1.65
1.1 1.2 1.3
0.6
0.15
0.2
0.3
0.5
0.07 0.12 0.22
1.55
1.6
0.2
1.65
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2377-3473
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2008. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.2