3N165 - Linear Systems

3N/LS165, 3N/LS166
MONOLITHIC DUAL P-CHANNEL
ENHANCEMENT MODE
MOSFET
FEATURES
VERY HIGH INPUT IMPEDANCE
HIGH GATE BREAKDOWN
LS3N165, LS3N166
3N165, 3N166
ULTRA LOW LEAKAGE
LOW CAPACITANCE
ABSOLUTE MAXIMUM RATINGS (NOTE 1)
(TA=25°C unless otherwise noted)
Drain-Source or Drain-Gate Voltage (NOTE 2)
3N165
40 V
3N166
30 V
Gate-Gate Voltage
±80 V
Drain Current (NOTE 2)
50 mA
Storage Temperature
-55ºC to +150ºC
Operating Temperature
-55ºC to +150ºC
Lead Temperature (Soldering, 10 sec.)
+300ºC
Power Dissipation (One Side)
300 mW
Total Derating above 25ºC
4.2 mW/ºC
SOIC
TOP VIEW
TO-99
TOP VIEW
ELECTRICAL CHARACTERISTICS (TA=25°C and VBS=0 unless otherwise noted)
3N165 &
3N166
SYMBOL
CHARACTERISTIC
MIN
LS3N165 &
LS3N166
MAX MIN MAX UNITS
CONDITIONS
IGSSR
Gate Reverse Leakage Current
--
10
--
100
VGS=40V
IGSSF
Gate Forward Leakage Current
--
-10
--
-100
VGS=-40V
--
-25
--
IDSS
Drain to Source Leakage Current
--
-200
ISDS
Source to Drain Leakage Current
--
-400
ID(on)
On Drain Current
-5
VGS(th)
Gate Source Threshold Voltage
-2
VGS(th)
Gate Source Threshold Voltage
rDS(on)
Drain Source ON Resistance
gfs
Forward Transconductance
gos
Output Admittance
Clss
Input Capacitance
Crss
Coss
RE(Yls)
Common Source Forward
Transconductance
--
pA
TA=+125ºC
-200
VDS=-20 V, VGS=VBS=0V
--
-400
VSD=-20 V, VGD=VDB=0V
-30
-5
-30
mA
VDS=-15V
VGS=-10 V
VSB=0V
-5
-2
-5
V
VDS=-15V
ID=-10µA
VSB=0V
-2
-5
-2
-5
V
VDS=VGS
ID=-10µA
VSB=0V
--
300
--
300
ohms
VGS=-20V
ID=-100µA
VSB=0V
3000 1500 3000
µS
VDS=-15V
ID=-10mA
f=1kHz
--
300
--
300
µS
--
3.0
--
3.0
Reverse Transfer Capacitance
--
0.7
--
1.0
Output Capacitance
--
3.0
--
3.0
1200
--
Linear Integrated Systems
1500
pF
µS
VSB=0V
VDS=-15V
ID=-10mA
(NOTE 3)
VSB=0V
VDS=-15V
ID=-10mA
(NOTE 3)
VSB=0V
f=1MHz
f=100MHz
• 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261
5/14/2012 Rev#A4 ECN# 3N165 3N166
MATCHING CHARACTERISTICS 3N165
LIMITS
SYMBOL
CHARACTERISTIC
MIN.
MAX. UNITS
Gfs1/Gfs2
Forward Transconductance Ratio
0.90
1.0
VGS1-2
Gate Source Threshold Voltage Differential
--
100
ΔVGS1-2/ΔT Gate Source Threshold Voltage Differential
--
100
CONDITIONS
VDS=-15V
ID=-500 µA
f=1kHz VSB=0V
VDS=-15V
ID=-500 µA
VSB=0V
µV/ºC VDS=-15V
ID=-500 µA
VSB=0V
mV
Change with Temperature
TA=-55ºC to = +125ºC
TYPICAL SWITCHING WAVEFORM
INPUT PULSE
Rise Time≤2ns
Pulse Width≥200ns
SAMPLING SCOPE
Tr≤0.2ns
CIN≤2pF
RIN≥10M
Typical Switching Time Test Circuit
Circuit
NOTES:
1. MOS field effect transistors have extremely high input resistance and can be damaged by the accumulation of excess static charge. To
avoid possible damage to the device while wiring, testing, or in actual operation, follow these procedures:
To avoid the build-up of static charge, the leads of the devices should remain shorted together with a metal ring except when being tested
or used. Avoid unnecessary handling. Pick up devices by the case instead of the leads. Do not insert or remove devices from circuits
with the power on, as transient voltages may cause permanent damage to the devices.
2. Per transistor.
3. For design reference only, not 100% tested.
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only and functional
operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Linear Integrated Systems (LIS) is a 25-year-old, third-generation precision semiconductor company providing
high-quality discrete components. Expertise brought to LIS is based on processes and products developed
at Amelco, Union Carbide, Intersil and Micro Power Systems by company President John H. Hall. Hall,
a protégé of Silicon Valley legend Dr. Jean Hoerni, was the director of IC Development at Union Carbide,
co-founder and vice president of R&D at Intersil, and founder/president of Micro Power Systems.
Linear Integrated Systems
• 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261
5/14/2012 Rev#A4 ECN# 3N165 3N166