1.6x0.8mm SMD CHIP LED LAMP Part Number: APHK1608CGCK Green Features Description z1.6mmx0.8mm SMT LED, 0.7mm thickness. The Green source color devices are made with AlGaInP on zLow power consumption. GaAs substrate Light Emitting Diode. zWide viewing angle. zIdeal for backlight and indicator. zVarious colors and lens types available. zPackage : 2000pcs / reel. zMoisture sensitivity level : level 4. zRoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC0593 REV NO: V.8 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 1 OF 5 ERP: 1204000025 Selection Guide Part No. Dice APHK1608CGCK Lens Type Green (AlGaInP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 18 60 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC0593 REV NO: V.8 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 2 OF 5 ERP: 1204000025 Green APHK1608CGCK SPEC NO: DSAC0593 REV NO: V.8 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 3 OF 5 ERP: 1204000025 APHK1608CGCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAC0593 REV NO: V.8 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 4 OF 5 ERP: 1204000025 PACKING & LABEL SPECIFICATIONS APHK1608CGCK SPEC NO: DSAC0593 REV NO: V.8 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 5 OF 5 ERP: 1204000025