1.6X0.8mm SMD CHIP LED LAMP Part Number: AP1608SGC Super Bright Green Features Description z 1.6mmX0.8mm SMT LED, 1.1mm thickness. The Super Bright Green source color devices are made with z Low power consumption. Gallium Phosphide Green Light Emitting Diode. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC4528 REV NO: V.10 DATE: AUG/06/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 1 OF 5 ERP: 1203000064 Selection Guide Part No. Dice AP1608SGC Lens Type Super Bright Green (GaP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 5 12 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC4528 REV NO: V.10 DATE: AUG/06/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 2 OF 5 ERP: 1203000064 Super Bright Green AP1608SGC SPEC NO: DSAC4528 REV NO: V.10 DATE: AUG/06/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 3 OF 5 ERP: 1203000064 AP1608SGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAC4528 REV NO: V.10 DATE: AUG/06/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 4 OF 5 ERP: 1203000064 PACKING & LABEL SPECIFICATIONS AP1608SGC SPEC NO: DSAC4528 REV NO: V.10 DATE: AUG/06/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 5 OF 5 ERP: 1203000064