Specifications

SOT-23 SURFACE MOUNT LED LAMP
Part Number: AM23SRD-F
Super Bright Red
Features
Description
z SOT-23 package surface mount LED lamp.
The Super Bright Red source color devices are made with
z Low power consumption.
Gallium Aluminum Arsenide Red Light Emitting Diode.
z Long life - solid state reliability.
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
5.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB4313
REV NO: V.7A
DATE: JAN/06/2013
PAGE: 1 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.Liu
ERP: 1202000080
Selection Guide
Part No.
Dice
AM23SRD-F
Lens Type
Super Bright Red (GaAlAs)
Red Diffused
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min.
Typ.
55
90
*12
*30
2θ1/2
140°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Red
660
λD [1]
Dominant Wavelength
Super Bright Red
640
Δλ1/2
Spectral Line Half-width
Super Bright Red
C
Capacitance
VF [2]
IR
Max.
Units
Test Conditions
*655
nm
IF=20mA
*640
nm
IF=20mA
20
nm
IF=20mA
Super Bright Red
45
pF
VF=0V;f=1MHz
Forward Voltage
Super Bright Red
1.85
2.5
V
IF=20mA
Reverse Current
Super Bright Red
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
* Wavelength value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
155
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB4313
REV NO: V.7A
DATE: JAN/06/2013
PAGE: 2 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.Liu
ERP: 1202000080
Super Bright Red
AM23SRD-F
SPEC NO: DSAB4313
REV NO: V.7A
DATE: JAN/06/2013
PAGE: 3 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.Liu
ERP: 1202000080
AM23SRD-F
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAB4313
REV NO: V.7A
DATE: JAN/06/2013
PAGE: 4 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.Liu
ERP: 1202000080
PACKING & LABEL SPECIFICATIONS
AM23SRD-F
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAB4313
REV NO: V.7A
DATE: JAN/06/2013
PAGE: 5 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.Liu
ERP: 1202000080