8 7 6 5 4 88.83 mm [3.497 in] 3 2 1 60.50 mm [2.382 in] A D D 58.77 mm [2.314 in] B B 65.00 mm [2.559 in] A SECTION A-A 120.00 mm [4.724 in] ASSEMBLY 110.49 mm [4.350 in] R8.33 mm 4X [0.328 in] 2.00 mm [0.079 in] C C 95.00 mm [3.740 in] Polycarbonate Version Only 2.50 mm [0.098 in] 54.50 mm [2.146 in] 46.87 mm [1.845 in] 6.00 mm [0.236 in] 52.83 mm [2.080 in] (ORDERED SEPARATELY) File #E65324 NEMA 4, 4X Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] 3.73 mm 6X 82.30 mm [3.240 in] SECTION B-B 27.99 mm 36.17 mm [1.102 in] [1.424 in] [0.147 in] NOTE Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0 / 5VA @ 3mm) STEEL INNER PANEL B 95.00 mm [3.740 in] 3.00 mm 2X 87.00 mm [3.425 in] 3.90 mm 2X M4 STAINLESS STEEL INSERTS [0.118 in] Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) [0.153 in] (MOUNTING HOLES) 24.00 mm [0.945 in] 82.00 mm [3.228 in] B 1555D 3.00 mm 4X 1555D Regular Enclosure [0.118 in] General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 1555DGY 1555D2GY ACCESSORIES R6.00 mm 4X [0.236 in] R7.50 mm 4X [0.295 in] 52.00 mm 40.01 mm [2.047 in] [1.575 in] M3 BRASS INSERTS 4X A 28.00 mm [1.102 in] 54.16 mm [2.132 in] 36.80 mm [1.449 in] 1598ATS100 SC1554 A 111.00 mm [4.370 in] 1555D LID - INSIDE BOX - INSIDE 7 1554CPL 1591MM100 95.00 mm [3.740 in] 85.01 mm [3.347 in] 114.00 mm [4.488 in] 8 28.00 mm 54.60 mm [1.102 in] [2.149 in] Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 6 5 4 3 2 1