LCM1060 shielded choke coil inductor EU features inductors • Original construction and wiring technology delivers low DC resistance, high allowable current and low leakage magnetic flux • Automatic surface mounting is applicable • Excellent solderability and endurance environment • Suitable for reflow soldering • Products meet EU RoHS requirements • AEC-Q200 Qualified dimensions and construction Ferrite Core Magnet Wire Adhesive Size Electrode W LCM1060 L H LCM1060 Type Dimensions inches (mm) W H A .240 .398±.016 .394±.016 .242±.016 (10.1±0.4) (10.0±0.4) (6.15±0.4) (6.1 typ.) A ordering information New Part # L T Terminal Surface Material T: Sn TEG Taping TEG: Plastic embossed M 100 Nominal Inductance 3 digits Tolerance M:±20% N: ±30% For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 236 12/01/14 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com LCM1060 shielded choke coil inductor Nominal Inductance (µH) Part Designation LCM1060TTEG1R5N LCM1060TTEG2R2N LCM1060TTEG3R3N LCM1060TTEG4R7N LCM1060TTEG6R8N LCM1060TTEG100M Tolerance (%) 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 LCM1060TTEG150M LCM1060TTEG220M LCM1060TTEG330M LCM1060TTEG470M LCM1060TTEG680M LCM1060TTEG101M LCM1060TTEG151M LCM1060TTEG221M LCM1060TTEG331M LCM1060TTEG471M ±30% ±20% DC Resistance (mΩ) Saturation Current (A) 6.8 6.6 6.4 5.6 5.2 4.2 3.8 3.2 2.5 2.2 1.7 1.5 1.2 1.0 0.8 0.68 9 11 14 15 18 26 39 68 80 103 150 200 410 487 588 880 Typ. Self Resonant Frequency (MHz) Temperature Rise Typ. Current (A) 6.8 132 6.8 81 5.7 48 5.6 47 4.9 32 4.1 17 3.7 15 2.8 13 2.2 10 2.1 8.5 1.6 6.5 1.4 5.3 1.0 4.9 0.9 3.7 0.8 2.7 0.6 2.2 Allowable current is a DC Current which causes initial inductance to decrease by 10%. Or coil temperature to rise by 40°C, whichever is smaller Operating Temperature Range: -40°C ~ +150°C The operating temperature range of the coil (ambient temperature + self heating) must remain at +150°C or less DC Bias Characteristics environmental applications 10 0µH 100 10 µH 10 Temperature Rise (°C) 47 0µH Inductance (µH) Surface Temperature Rise 50 1000 470µH 10µH 100µH 40 1.5µH 30 20 10 1. 5 µH 0 1 1 10 100 1000 10000 0 2000 4000 6000 8000 10000 DC Bias (mA) DC Bias (mA) Saturation current is a DC current which causes initial inductance to decrease by 10%. Temperature rise current is a DC current which cause coil temperature to rise by 40°C. Performance Characteristics Parameter Heat Shock Low Temperature Exposure High Temperature Exposure Moisture Endurance Requirement ∆ L/L Limit Typical ±5% ±1% ±5% ±1% ±5% ±1% ±5% ±1% Test Method -40°C (30 minutes), +150°C (30 minutes), 100 cycles -40°C ±2°C, 1000 hours 150°C ±2°C, 1000 hours 85°C, 85% RH, 1000 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/01/14 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 237 inductors applications and ratings