LCM1060 choke coil inductor EU NEW features inductors • Original construction and wiring technology delivers low DC resistance, high allowable current and low leakage magnetic flux • Automatic surface mounting is applicable • Excellent solderability and endurance environment • Suitable for reflow soldering • Products meet EU RoHS requirements • AEC-Q200 Qualified dimensions and construction Ferrite Core Magnet Wire Adhesive Electrode Size W LCM1060 L H L Dimensions inches (mm) W H A .240 .398±.016 .394±.016 .242±.016 (10.1±0.4) (10.0±0.4) (6.15±0.4) (6.1 typ.) A ordering information New Part # LPM1060 Type T Terminal Surface Material T: Sn TEG Taping TEG: Plastic embossed BK: Bulk M 100 Nominal Inductance 3 digits Tolerance M:±20% N: ±30% For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 218 1/11/13 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com LCM1060 choke coil inductor applications and ratings LCM1060TTEG1R5N LCM1060TTEG2R2N LCM1060TTEG3R3N LCM1060TTEG4R7N LCM1060TTEG6R8N LCM1060TTEG100M Tolerance (%) 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 LCM1060TTEG150M LCM1060TTEG220M LCM1060TTEG330M LCM1060TTEG470M LCM1060TTEG680M LCM1060TTEG101M LCM1060TTEG151M LCM1060TTEG221M LCM1060TTEG331M LCM1060TTEG471M Typ. DC Resistance (MΩ) Saturation Current (A) 6.8 6.6 6.4 5.6 5.2 4.2 3.8 3.2 2.5 2.2 1.7 1.5 1.2 1.0 0.8 0.68 10.64 11.94 12.75 18.18 21.29 28.61 40.40 48.00 73.00 103.7 127.0 190.0 304.8 383.0 581.0 892.0 ±30% ±20% Temperature Rise Current (A) 6.8 6.8 5.7 5.6 4.9 4.1 3.7 2.8 2.2 2.1 1.6 1.4 1.0 0.9 0.8 0.6 Self Resonant Frequency (MHz) Typ. 154.94 96.88 69.79 70.29 35.85 19.89 20.89 12.63 11.71 9.90 8.77 7.14 4.95 4.38 3.48 2.60 Operating Temperature Range -40°C to +125°C Saturation current: This indicates the value of D.C. current when inductance becomes 90% nominal value. Temperature rise current: The value of D.C. current when temperature of coil becomes ∆t=40°C. environmental applications Surface Temperature Rise DC Bias Characteristics 50 Inductance (µH) 47 0µH 10 0µH 100 10 µH 10 Temperature Rise (°C) 1000 470µH 10µH 100µH 40 1.5µH 30 20 10 1. 5 µH 0 1 1 10 100 1000 10000 0 2000 4000 6000 8000 10000 DC Bias (mA) DC Bias (mA) Performance Characteristics Parameter Heat Shock Low Temperature Exposure High Temperature Exposure Moisture Endurance Requirement ∆ L/L Limit Typical ±5% ±1% ±5% ±1% ±5% ±1% ±5% ±1% Test Method -40°C (30 minutes), +125°C (30 minutes), 100 cycles -40°C ±2°C, 1000 hours 125°C ±2°C, 1000 hours 85°C, 85% RH, 1000 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/11/13 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 219 inductors Nominal Inductance (µH) Part Designation