GS06U 6W AC-DC Industrial Adaptor series ■ Features : Universal AC input / Full range 2 pole USA plug No load power consumption <0.075W Energy efficiency Level Ⅵ Comply with EISA 2007/DoE Class II power (without earth pin) Protections: Short circuit / Overload / Over voltage Pass LPS Fully enclosed plastic case 2 years warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GS06U-1P1J GS06U-11P1J GS06U-2P1J GS06U-3P1J GS06U-4P1J GS06U-5P1J GS06U-6P1J GS06U-8P1J GS06U-1 GS06U-1-1 GS06U-2 GS06U-3 GS06U-4 GS06U-5 GS06U-6 GS06U-8 48V Note.2 5V 7.5V 9V 12V 15V 18V 24V RATED CURRENT 1.00A 0.8A 0.66A 0.5A 0.4A 0.33A 0.25A 0.125A CURRENT RANGE 0 ~ 1.00A 0 ~ 0.8A 0 ~ 0.66A 0 ~ 0.5A 0 ~ 0.4A 0 ~ 0.33A 0 ~ 0.25A 0 ~ 0.125A RATED POWER 5W 6W 6W 6W 6W 6W 6W 6W RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 180mVp-p 200mVp-p VOLTAGE TOLERANCE Note.4 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% LINE REGULATION Note.5 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION Note.6 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% 79.5% 79.5% 80.5% 81.5% 82% 85% SETUP, RISE, HOLD UP TIME 1000ms, 50ms, 12ms at full load 90 ~ 264VAC 127 ~ 370VDC VOLTAGE RANGE INPUT FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 75% AC CURRENT INRUSH CURRENT (max.) 0.2A / 100VAC 0.25mA / 240VAC OVERLOAD >105% rated output power for 5V ; >110% rated output power for 7.5 ~ 48V Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% rated output voltage Protection type : Clamp by zener diode 0 ~ +40℃ (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE (Note. 7) EMC EMISSION MTBF CONNECTOR NOTE 50A / 230VAC LEAKAGE CURRENT(max.) PROTECTION OTHERS 80.5% ±0.03% / ℃ (0 ~ 40℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to FCC part 15 Class B DIMENSION PACKING PLUG 500Khrs min. MIL-HDBK-217F(25℃) 32*66*42.5mm (L*W*H) 100g ; 110pcs / 12Kg / CARTON See page 2 ; Other type available by customer requested CABLE See page 2 ; Other type available by customer requested 1.All parameters are specified at 115VAC input, rated load, 25℃ 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:GS06U-SPEC 2015-08-27 GS06U 6W AC-DC Industrial Adaptor Mechanical Specification series Unit:mm UL1185 18AWG 1200 +150/-0mm for 5~9V UL2468 24AWG 1800 +150/-0mm for 12~48V 17.1±0.5 48±1 42.5±1 66±1 11±0.5 C"+" 32±1 ID 2.1 x OD 5.5 Outside 12.7 Inside Plug Assignment NAME PLATE Standard plug: P1J 18.2 6.3 P1J 24.2 1.5 Derating Curve P/N OUTPUT CENTER + Static Characteristics 100 90 LOAD (%) LOAD (%) 100 70 80 70 60 50 40 0 10 20 30 40 AMBIENT TEMPERATURE (℃) 50 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS06U-SPEC 2015-08-27