WDM & Optical Transport Datasheet LambdaDriver® –10Gbps 8 ports XFP - EXC Module (EM1600-8CC10G) Features Front panel user interfaces with port status indicators XFPs provide SFF-8472 digital diagnostics support LIN support XFP ports configurable to 10Gbps Ethernet or OC-192 per module Flexible port cross-connectivity Installable in LD1600, 1600L or LD400L chassis Hot-swappable Applications The LD1600-8CC10G module can be used as a 10GE or OC192 quad transponder or as Electrical ROADM for 2 x 10 Gbps DWDM channels. Overview The EM1600-8CC10G XFP Quad Transponder module is a single slot module that incorporates 8 independent XFP based 10 Gbps ports with intelligent port interconnection functionality. The flexible configuration options permit pairing any-to-any port to provide several data transfer modes: - As 2 wavelengths Electrical ROADM - Between flexibly selectable pairs of ports, i.e., in quad transponder mode - From one port to a third port in case the second port fails, i.e. in port protection mode The ports can be configured to operate under the 10 Gbps Ethernet protocol or at the OC-192 data rate in full-duplex mode with Link Integrity Notification (LIN) and Loopback capability. LIN notifies terminal equipment of link failure by cutting off laser power on the access side whenever no power is received from the WDM side, and vice versa. Loopback is used to test the integrity of the data path of an individual port and its internal circuitry by returning the received data to the transmitting device at the tested interface. The modules are manageable by the LambdaDriver management module either locally by RS232 CLI access or remotely by Telnet, SNMP or GUI management via the MRV MegaVision Pro management platform. Per-port front panel LEDs indicate XFP and link presence or absence. 2 wave eROADM implementation ������������ ������������ ������� ������� ���� ���� � � � � � � � � ���� ���� ���� � � � � ���� � � � � ���� ������������� ������������� �� ���� ������ ����� ���� �� ���� ������ ����� Two services dropped to site in port protection mode �� ���� ������ ����� �� ���� ������ ����� Re-routing of service 1 to a different location (pass-through) by remote configuration Not sure what solution best fits your needs? Visit www.mrv.com or e-mail us at [email protected] WDM & Optical Transport Enviromental Operating Temperature -5 to 45 0C (23 to 113 0F) Storage Temperature -10 to 70 0C (14 to 158 0F) Relative Humidity 85% max, non-condensing Dimensions (W x H x D) 26.93 x 263.4 x 227mm ( 1.06 x 10.37 x 8.956 In) Weight 1.200 kg (2.65 lb) Connectors All ports: XFP sockets Power consumption Module: 7.3W XFP: 3.5 W Technical Specifications Order Info Data Rate Optical parameters LEDs P/L n: Product EM1600-8CC10G 10GE or OC192 (STM-64) Per the XFP Detection of XFP and Link presence or absence at port n Description 8x10Gbps Ethernet or OC-192 full-duplex, XFP ports. ��� ��� ���� ���� �� ������� ���������� ��� ������ ���������� ����� �������� ��� ��� ������� ��� ������ �� ������������ ������ ������ �� �� ������������� �� ���� �� ��� ����������� ��� ����� ����� ���� ����� �������� ��� ����������� �� ����� ������������ ������������ ��� ����� ����� ���� ��� ������ ��� ���������� �� ����� ������������ ������������ ��� ��������������� ��������� ���� ���������� ���������������� �� ����� ������������������� ������� ���� ���� ��������� ���� ���� ������������ ��� ����������� ��������� ����������� ��� ��������������� ������� �� ��� �������� ������ ��� ����� ���� ����������� �������� �� �� �������� �� ��������� �������� ��� �������� �� ������������ ������� �� ��� ����������� ��� �� �������������� �� ������� ��� ��� ������������� ������ ������� ��� �������������� ��� ���� ������������ ��� �������������� ��� ��� ��� �������������� ���� ��� ���������� �� ��� ��������������� ���� ����� ���������� ��� ��� �������� �� ����� ���������� �������� MRV-LD-8CC10G Rev.2 02 -10 Copyright ©2008 MRV Communications, Inc. All Rights Reserved.