M22 Connectors – Polarised Specification Materials Environmental Mouldings:Standard or High Temperature Plastic, UL94V-0 Contacts:Male: Brass Female: Phosphor Bronze Operating Temperature: -25°C to +85°C Solderability: 235°C for 3 seconds Soldering heat resistance: 245°C for 5 seconds Finish:Tin Electrical Mechanical Current rating:2A Durability: Voltage rating: 100V AC/DC Insertion force (max):6.9N Voltage proof: 800V AC for 1 minute Contact resistance: 20 mΩ max Insulation resistance: 1000 MΩ min 100 operations 1.0N 2mm (.079") PITCH Withdrawal force (min): All preferred sizes of this range are held in stock. Check www.harwin.com for availability. Mating Profiles FEMALE CRIMP MALE M22-307 VERTICAL PC TAIL 8.05 9.50 M22-220 M22-307 HORIZONTAL PC TAIL 8.05 9.50 M22-221 All dimensions in mm. www.harwin.com 135 M22 Connectors – Polarised Latched Female Crimp Housing and Contacts Female crimp housings latch into male shrouded PC tail connectors. Mates with male connectors shown on page 137. Calculation crimp housing A 2mm (.079") PITCH B A B + 3.80 B 2.00 x (No. of contacts per row - 1) 2.00 6.85 4.45 crimp CONTACT hand crimp tool Order codes for reeled contacts refer to one reel of 10,000 contacts. Order codes for loose contacts refer to one pack of 100 contacts. Crimp contact suitable for 24 to 30 AWG. 5.80 ø 1.40mm max ORDER CODE Z22-020 1.00mm max Wire stripping details Instruction sheets available at www.harwin.com/downloads/instructions HOW TO ORDER M22 - 30 X XX XX Series code connector type Finish 00 Housing 46 Tin (Contacts) 6 Reeled Contact No. of CONTACTS PER ROW 7 Crimp Housing 02 to 15 Housing 8 Loose Contact 00 Contacts All dimensions in mm. www.harwin.com 136 M22 Connectors – Polarised Latched Male PC Tail Shrouded connectors for added protection of male pins. Mates with female connectors shown on page 136. Female crimp connector latches into both male connectors. B A B + 4.00 B 2.00 x (No. of contacts per row - 1) 2mm (.079") PITCH Calculation 2.00 ø0.80 Recommended PC Board Pattern vertical horizontal A 4.70 A 4.95 6.10 6.35 7.70 3.40 B 2.00 2.00 B 3.40 0.50 square HOW TO ORDER M22 - 22 X XX 46 Series code Finish 46 Tin Type 0 Vertical No. OF CONTACTS PER ROW 1 Horizontal 02 to 15 All dimensions in mm. www.harwin.com 137 0.50 square