Optoway TRML-3102 / TRML-3102A ******************************************************************************************************************************************************************************* TRML-3102 / TRML-3102A / TRML-3102C / TRML-3102AC 3.3V / 1310 nm / 155 Mbps SFF LC MULTI-MODE TRANSCEIVER ***************************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l l l l l l l l l l l l The TRML-3102 series multi-mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as FDDI, 100BASE-FX and SONET OC-3 / SDH STM-1. This module is designed for multi-mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. Duplex LC Multi-Mode Transceiver FDDI LCF-PMD Compliant FDDI PMD Compliant IEEE 802.3u 100BASE-FX Compliant Small Form Factor, RJ-45 size, 2X5 pin Package 0 to 2000 m Transmission Distance LVPECL Signal Input / Output LVTTL Transmitter Disable Input LVPECL Signal Detection Output (TRML-3102) LVTTL Signal Detection Output (TRML-3102C) Single +3.3 V Power Supply 0 to 70oC Operation (TRML-3102) -40 to 85oC Operation (TRML-3102A) Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant APPLICATIONS l ATM 155 Mbps Links l SONET/SDH Equipment Interconnect l Fast Ethernet 100 Mb/s Links LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. TRML-3102 TRML-3102A Bit Rate (Mb/s) 100 BASE 125/155 125/155 FX FX Distance Wavelength (m) (nm) Package Temp. (oC) 0 to 2000 0 to 2000 2X5 LC 2X5 LC 0 to 70 -40 to 85 1310 1310 TX Power RX Sens. (dBm) (dBm) -12 to -19 -12 to -19 -30 -30 Signal Detect Output LVPECL/ LVTTL Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Symbol Tstg Topr Soldering Temperature Power Supply Voltage Input Voltage --Vcc --- Output Current Iout Min -40 0 -40 Units o C o C 0 GND Max 85 70 85 260 4.5 Vcc 0 30 mA Min 3.1 0 -40 Typ 3.3 Max 3.5 70 85 o C V V Notes TRML-3102 TRML-3102A 10 seconds on leads only Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Symbol Vcc Topr 125 / 155 Units / Notes V o C / TRML-3102 o C / TRML-3102A Mb/s ******************************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 7/1/2004 V1.0 Optoway TRML-3102 / TRML-3102A ****************************************************************************************************************************************************************************** Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Power Supply Current Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ Max Units Po -19 ---12 dBm 1260 1310 1360 nm λ ----20 nm ∆λ ER 10 ----dB Compliant with Bellcore GR-253-CORE and ITU recommendation G.957 tr 2 ns tf 2 ns RIN -116 dB/Hz TJ 1 ns Icc IIL IIH VIH - VIL V IL - VCC V IH - VCC VTDIS,L VTDIS,H tDIS 140 -350 350 300 -2.0 -1.1 0 Vcc – 1.3 -1.58 -0.74 0.5 Vcc 1 mA µA µA mV V V V V ms Notes 1 RMS (σ) 10% to 90% Values 10% to 90% Values 2 3 4 4 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 62.5/125 µm MM fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. Maximum current is specified at Vcc = Maximum @ maximum temperature. 4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.1V < Vcc <3. 5V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Power Supply Current Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol Min Typ Max Units Notes --Pin Pa Pd ---8 ---47 1.0 1100 --- -30 ---30 --- dBm dBm dBm dBm dB nm 1 Icc VOL - V CC VOH - V CC VOL - V CC VOH - V CC VOL VOH -2.0 -1.1 -2.0 -1.1 2.0 --------- 1600 100 -1.58 -0.74 -1.58 -0.74 0.8 Transition: low to high Transition: high to low mA V V V V V V 2 3 3 TRML-3102 TRML-3102C Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS with 72 ones and 72 zeros. 2. The current excludes the output load current. 3. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 7/1/2004 V1.0 Optoway TRML-3102 / TRML-3102A ****************************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN 1 2 3 4 5 6 7 8 Symbol V EEr V CC r SD RD− RD+ V CC t V EEt TDis 9 10 MS TD+ TDMS Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. Receiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module To enable module connect to TTL logic low “0” Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Vcc3.3V MICROSTRIP1 TD- Z=50R MICROSTRIP2 LVPECL TD+ Z=5OR 150ohm 150ohm TDTD+ TDis Veet Vcct 10 9 8 7 6 TDis(LVTTL) Vcc3.3V 1uH 10nF 10nF 10uF 10uF 1uH PHY DEVICE Veer Vccr SD RDRD+ Vcc3.3V Vcc3.3V SFF2X5 1 2 3 4 5 130R 10nF Vcc3.3V 10uF RD+ MICROSTRIP3 Z=50R MICROSTRIP4 82R LVPECL 130R RD- Z=5OR SD 1K TO LVPECL STAGE 82R Note: 1. 1000ΩSD Output pull-down resistor required for TRML-3102 / TRML-3102A (LVPECL SD Output) 2. No pull-down resistor required for TRML-3102C / TRML-3102A C (LVTTL SD Output) 3. Veer and Veet are not internally connected to each other. 4. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 7/1/2004 V1.0 Optoway TRML-3102 / TRML-3102A ****************************************************************************************************************************************************************************** PACKAGE DIAGRAM Units in mm TRML-3102 / TRML-3102A Note: Specifications subject to change without notice. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 7/1/2004 V1.0