Oscilent Corporation PRODUCT SPECIFICATION REV A January 2010 Oscilent Controlled Document Ordering Code / Part Number Product Description 864-RF2140.0M-F WCDMA, RF/Rx SAW Filter Specification Contents o Mechanical Dimensions o Test Circuit o Maximum Ratings o Electrical Specification o Frequency Performance Notes o Electrostatic Sensitive Device (ESD) o Avoid excessive ultrasonic exposure o Solderability compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature o This product complies with EU directive 2002/95/EC (RoHS compliance) Oscilent Corporation Telephone: 1.949.252.0522 Fax: 1.949.252.0522 Email: [email protected] Product Specification www.oscilent.com Oscilent Part Number 864-RF2140.0M-F WCDMA, RF/Rx SAW Filter January 2010 Rev A Mechanical Dimensions (mm) Pin Description B, D Ground A Input C Balance Out (1) E Balance Out (2) Test Circuit Product Specification P. 1 www.oscilent.com Oscilent Part Number 864-RF2140.0M-F WCDMA, RF/Rx SAW Filter January 2010 Rev A Maximum Ratings Parameters Description Unit Minimum Typical Maximum Operating Temperature Range °C -30 - +85 Storage Temperature Range °C -40 - +85 Maximum DC Voltage V - - 4 Maximum Input Power dBm - - 10 Source Impedance Ω 50 Ohm Load Impedance Ω Balanced 100 Ohm // 10nH Notes: Matching Network (Ref. Testing Environment Circuit as shown above). Electrical Specification Parameters Description Unit Minimum Typical Maximum Center Frequency (Fo) MHz - 2140 - dB - 1.7 2.3 Amplitude Ripple within 2110.0 ~ 2170.0 MHz dBp-p - 0.6 1.5 Return Loss Input within 2110.0 ~ 2170.0 MHz dB 8 12 - Return Loss Output within 2110.0 ~ 2170.0 MHz dB 8 12 - Amplitude Balance within 2110.0 ~ 2170.0 MHz dB -2.0 -0.7 ~ +0.9 2.0 Phase Balance within 2110.0 ~ 2170.0 MHz dB -8 -3 ~ 0 8 D.C. ~ 849.0 MHz dB 45 55 - 849.0 ~ 1350.0 MHz dB 40 47 - 1350.0 ~ 1980.0 MHz dB 30 34 - 1980.0 ~ 2025.0 MHz dB 25 28 - 2215.0 ~ 2255.0 MHz dB 15 21 - 2255.0 ~ 2270.0 MHz dB 20 23 - 2275.0 ~ 2400.0 MHz dB 22 24 - 2400.0 ~ 3910.0 MHz dB 30 36 - 3910.0 ~ 6000.0 MHz dB 40 52 - Insertion Loss within 2110.0 ~ 2170.0 MHz Attenuation: Product Specification P. 2 www.oscilent.com Oscilent Part Number 864-RF2140.0M-F WCDMA, RF/Rx SAW Filter January 2010 Rev A Frequency Performance Product Specification P. 3 www.oscilent.com