V-Series Contura XIV Switches The V-Series Contura XIV snap-in rocker switches offer countless unique options including choices for ratings, circuits, colors, illuminations and legends. These single or double pole switches feature removable actuators in a choice of actuator styles and colors, and can be illuminated with either square or bar shaped lenses. Actuators may be purchased and stocked separately. An optional plug-in terminal connector enables pre-wiring of harnesses. The Contura switches with sealed option, are certified to IP66 and IP68, signifying complete protection against dust and prolonged spray and submersion under pressure, and are recognized to UL1500 - Ignition Protection for Marine Products. These switches are vibration, shock, thermoshock, moisture and salt spray resistant. Temperature ratings range from -40°C to +85°C. Resources: Download 3D CAD Files IGS Product Highlights: Recessed ridges and center groove define the boundary between top and bottom switch functions Countless options for ratings, circuits, colors, illuminations and legends Certified to IP66 and IP68 for front panel components Vibration, shock, thermoshock, moisture and salt spray resistant Temperature range from -40°C to +85°C. STP Watch Product Video Typical Applications: On/Off Highway Equipment Marine Military Armored Vehicles Mining Machinery and Equipment Any application requiring environmental protection Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: (860) 793-9281 • Fax: (860) 793-9231 www.carlingtech.com 2 | V-Series Contura XIV Sealed Rocker Switches V-Series Switch DESIGN FEATURES INTERCHANGEABLE ACTUATORS Panel redesign is a snap with our wide range of rocker styles. Achieve maximum design variety with minimum inventory. Simply swap rockers to create an entirely new look for your panel. OPTIONAL PANEL SEAL Prevents water/dust ingress behind panel. DUAL SEAL PROTECTION Seals out water, dust, debris, and enables switch certification to IP66/IP68 for front panel components. MULTIPLE LIGHTING OPTIONS In addition to incandescent lamps, our LED illumination is offered in a wide array of light intensities, colors, as well as dual level, tri-color, and flashing options. CLEAN CONNECTIONS Options for both eight and ten terminal base styles with AMP & Packard compatible connectors affords myriad circuit options while providing ease of assembly. BRASS ROLLER PIN Robust mechanism eliminates the need for lubricants. Enables switch to withstand -40°C to +85°C temperatures. SILVER PLATED BUTT CONTACT MECHANISM Providing 50K to 100K electrical cycles and a variety of different electrical ratings. Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com V–Series Contura XIV Sealed Rocker Switches - General Specifications | 3 Electrical Contact Rating .4VA @ 24VDC (MAX) resistive 15 amps, 125VAC 10 amps, 250VAC 1/2 HP 125-250VAC 20 amps, 4-14VDC 15 amps, 15-28VDC 10A, 14VT 6A, 125VAC L Dielectric Strength 1500 Volts RMS Insulation Resistance 50 Megohms Initial Contact Resistance 10 milliohms max. @ 4VDC Life 50,000- 100,000 cycles circuit dependent Contacts Silver alloy, silver tin-oxide, fine silver Terminals Brass or copper/silver plate 1/4” (6.3mm) Quick Connect terminations standard. Solder lug, Wire Lead Mechanical Endurance Physical 150,000 cycles minimum circuit dependent Lighted Incandescent - rated 10,000 hours Neon - rated 25,000 hours LED - rated 100,000 hours 1/2 life (LED is internally ballasted for voltages to 24VDC) Seals Internal Optional external gasket panel seal Base Polyester blend rated to 125°C with a UL flammability rating of 94V0. Contura II,III,IV,V, Hard Surface: Basic actuator VI, VII Actuator structure molded of thermoplastic polycarbonate with a hard Nylon 66 thermoplastic surface overlay. Soft Surface: Basic actuator structure molded of thermoplastic polycarbonate with an elastomer overlay. Contura X,XI,XII Actuator,VP Nylon 66 Reinforced rated to 105°C Lens Polycarbonate rated at 100°C Contura XIV Polycarbonate lens/subrocker with ABS shell Actuator Travel (Angular Displacement) 2 position 3 positions 18° 9° from center Mounting Specifications .830[21.08] Panel Thickness Range Gaskets Acceptable Panel Thickness 0 .030 to .250 (.76mm to 6.35mm) TEST CUT IN 1.450[36.83] HOLE 1 .030 to .109 & .147 to .157 ACTUAL MATERIAL (.76 to 2.77mm & 3.73 to 3.98mm) Recommended: No gasket with panel SWITCH thickness of .032, .062, .093, .125,.187 or .250 MOUNTING HOLE Environmental Sealing Sealed version: IP68, in accordance with IEC 60529, BS 5490, DIN 40050 & NFC 20 010. This rating applies to front panel components of the actual switch only, and signifies protection against dust and the prolonged effects of immersion under pressure. The standard test for immersion under pressure requires submersion under one meter of water for 30 min. The V-Series switch has exceeded these parameters, having been actuated and illuminated during submersion. Corrosion Mixed Flowing Gas (MFG) Class III 3 year accelerated exposure per ASTM B-827, B-845 Silver and gold contacts Operating Temp. -40°C to +85°C Vibration 1 Per Mil-Std 202F, Method 204D Test Condition A 0.06 DA or 10G’s 10-500 Hz. Tested with VCH connector. Test criteria - No loss of circuit during test, pre and post test contact resistance. Vibration 2 Resonance search 24-50 Hz 0.40 DA 50-2000 Hz ±10 G’s peak Horizontal Axis 3-5 G’s max. Random 24 Hz 0.06 PSD-Gsq/Hz 60 Hz 0.50 100 Hz 0.50 200 Hz 0.025 2000 Hz 0.025 No loss of circuit during test; <10μ seconds chatter. Shock Per Mil-Std 202F, Method 213B, Test Condition K @ 30G’s. Tested with VCH connector. Test criteria - No loss of circuit during test, pre and post test contact resistance. Salt Spray Per Mil-Std 202F, Method 101D, Test Condition A, 96 Hrs. Sealed version only. Dust Per Mil-Std 810C, Method 510.2 Air Velocity 300 ±200 Feet/Min, Test Duration 16 Hrs. Thermal Shock Per Mil-Std 202F, Method 107F, Test Cond. A, -55°C to +85°C. Test criteria pre and post test contact resistance Moisture Resistance Per Mil-Std 202F, Method 106F, Test Criteria - pre and post test contact resistance Ignition Protection All Contura switches with sealed construction meet the requirements of UL1500/ISO8846 for ignition protection, in addition to conformance with EC directive 94/25/EC for marine products. Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com 4 | V-Series Contura XIV Dimensional Specifications: in. [mm] Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com V-Series Contura II to XIV - Circuit Diagram | 5 CIRCUIT CIRCUIT DIAGRAM CIRCUIT CIRCUIT DIAGRAM 3 1 3 2 3 5 3 3 3 1 2 5 3 4 6 2 2 1 3 4 2 6 4 5 6 5 SYMBOL LEGEND 2 5 3 4 DEFINITION DESIGNATES TERMINALS AND CONTACTS DESIGNATES LAMP LOCATION DESIGNATES MAINTAINED CIRCUITS DESIGNATES OTHER POSITION H 2 5 3 2 SYM. 3 8 6 6 G 1 3 1 6 3 3 2 1 S 2 7 6 5 2 F 1 5 2 5 3 1 2 6 R 2 6 4 3 5 E 3 6 M D 1 4 5 3 1 6 2 5 3 L 2 3 5 2 5 C 1 1 6 2 4 6 K 2 3 4 2 B 1 3 J 2 3 CIRCUIT DIAGRAM 1 6 A 2 CIRCUIT DESIGNATES MOMENTARY CIRCUITS DESIGNATES TWO POSITION CONNECTION 2 5 DESIGNATES EXTERNAL JUMPER PROVIDED BY CUSTOMER Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com 6 | V-Series Contura II to XIV - Circuit Diagram LAMP CIRCUIT CIRCUIT DIAGRAM LAMP CIRCUIT +8 +8 A/1 F/6 1 G/7 2 M/R 2 J/8 +1 +3 -4 SPECIAL #3 +6 1 2 N/T +8 -6 2 1 SPECIAL #4 1 +3 2 -7 +3 +6 1 -7 2 -7 -8 2 +1 +3 -4 P/V 2 -6 1 2 -7 +8 +1 +3 1 2 K/W CIRCUIT DIAGRAM 1 U/Y 2 (-)7 CIRCUIT DIAGRAM 3 1 +6 1 -7 3 17 18 10(-) J1 1 1 2 5 2 3 14 3 14 5 CIRCUIT DIAGRAM CIRCUIT CIRCUIT 10(-) J5 J5 1 3 5 1 3 5 3 1 6 16 6 16 JK 8 17 18 10(-) SYMBOL LEGEND SYM. SYMBOL LEGENDDEFINITION 1 1 J4 5 5 3 14 15 12 8 J4 2 3 14 15 12 3 14 JK 17 18 10(-) 3 11 13 1311 1 1 5 3 14 JJ 17 18 10(-) 5 NOTE: J circuits are available for all non-locking V-Series styles. Consult factory for p /n details. 6 11 13 13 11 8 J3 3 6 3 14 JJ 1 2 3 14 5 8 17 18 10(-) 5 -9 8 J3 2 -7 8 5 1 5 2 JA 1 J2 1 JA 17 18 10(-) J2 +10 CIRCUIT DIAGRAM 13 11 2 +8 CIRCUIT DIAGRAM 11 13 17 18 2 2 17 18 10(-) CIRCUIT 17 18 3 2 8 8 CIRCUIT CIRCUIT DIAGRAM 10(-) 1 17 18 10(-) J1 2 2 -7 1 +6 1 +8 -6 +3 2 +1 +3 1 SPECIAL #1 +3 H/Z -7 13 11 +3 1 +8 C/3 11 13 L/9 CIRCUIT DIAGRAM -6 -7 +3 CIRCUIT +3 LAMP CIRCUIT -7 1 -7 CIRCUIT -6 2 +8 1 E/5 CIRCUIT DIAGRAM -7 +3 D/4 +3 1 -7 B/2 LAMP CIRCUIT CIRCUIT DIAGRAM SYM. CIRCUIT DESIGNATES TERMINALS AND CONTACTS DEFINITION DESIGNATES LAMP LOCATION DESIGNATES TERMINALS AND CONTACTS DESIGNATES LAMP LOCATION JA,JJ,JK J1,J3,J4,J5 J2 CONNECTOR PART # JC1-01 JC2-01 JC3-01 DESIGNATES TWO POSITION CIRCUIT Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com V-Series Contura XIV Sealed Rocker Switches - Ordering Scheme | 7 V 1 D B B C 0 B 1 Series 2 Circuit 3 Rating 4 5 6 Termination Illumination Lamp 7 Lamp FA P C AB 8 Bracket 9 Actuator 1 SERIES V 2 CIRCUIT Terminal Connections as viewed from bottom of switch: 8 terminal 10 terminal 8 - - 7 8 - - 7 1 - - 4 1 - - 4 2 - - 5 2 - - 5 3 - - 6 3 - - 6 10 - - 9 Position: 2 3 Color No Gasket BlackB GrayG White W 8 term 10 Term Termination 12 .250 TAB (QC) no barriers AB .250 TAB (QC) with barriers JK .250 TAB (QC) no barriers 34 Solder Lug no barriers CD Solder Lug 56 Wire Leads no barriers EF Wire Leads Note: Codes J & K for circuits H, G & M. 1 Gasket 2 Gasket C D H J YZ 9 ACTUATOR STYLE 0 FA FB No Actuator - Furnished separately Contura XIV Contura XIV - Laser Etched 10 LENS COLOR / STYLE 0 - No Actuator Z - No Lens ClearWhite Amber Green 1 6 B G 2 7 C H 3 8 D J 4 9 E K 5 A F L 5 A N/A N/A .4VA @ 28VDC Resistive 15A 24V 20A 18V 20A 12V 20A 14V, 10A 14VT (circuit 1, 4 , A & D only) 10A 14V, 6A 14VT (circuit G only) 5 ILLUMINATION 13 14 Legend Actuator, Orientation Lens Legends 8 BRACKET COLOR & PANEL SEAL 3 RATING3 4 TERMINATION / BASE STYLE 1 00 12 Legend * Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma. SPDP 2 & 3, 5 & 6 Connected Terminals 1 & 2, 4 & 5 1A ONNONE OFF 2B (ON)NONE OFF 3C ONNONE(OFF) 4D ONNONE ON 5F ONNONE (ON) 6J ONOFF ON 7K ONOFF (ON) 8L (ON)OFF (ON) SPECIAL CIRCUITS 2 & 3, 5 & 4 5&4 H* 2 & 3 2 & 3 OFF G* 2 & 3, 5 & 6 2 & 3 OFF M* (2 & 3, 5 & 6) 2 & 3 2&1 R* (2 & 3, 5 & 6) E* 5 & 6 5 & 3 5&1 2 & 3 1&2 S* 2 & 3, 5 & 6 *Jumper between terminals 2 & 5 for circuits H,G,M,R & S are specified in selection 4. External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E may be used for SP OFF-ON-ON circuit. 1 B C D E F 11 Actuator Color 6 & 7 LAMP No lamp 0 Neon 1 125VAC 2 250VAC Incandescent 4 3V 5 6V 6 12V 7 18V 8 24V LED* superbrightsuperbright Red AmberGreen Red 2VDC A LF R 6VDC B MG S 12VDC C NH T 24VDC D PJ V ( ) - momentary SP - single pole - uses terminals 1, 2 & 3. DP - double pole uses terminals 1, 2, 3, 4, 5 & 6. Terminals 7, 8, 9 & 10 for lamp circuit only. 1 10 Lens Red M N P R S N/A Blue T U V W Y N/A PAD Printed Laser-Etched Lens color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. Jumper No No Yes T2 to 5 No No No No Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Lamps Illumination Type Lamp wired to Terminals S NONE – – A 1 INDEPENDENT 8 (+) 7 (–) B 1 DOWN 3 (+) 7 (–) C 2 UP 3 (+) 7 (–) D 1 DOWN 3 (+) 7 (–) 2 DOWN 1 (+) 7 (–) E 1 UP 1 (+) 7 (–) 2 UP 3 (+) 7 (–) F 1 INDEPENDENT 8 (+) 7 (–) 2 UP 3 (+) 6 (–) G 1 INDEPENDENT 8 (+) 7 (–) 2 UP 3 (+) 7 (–) H 2 INDEPENDENT 8 (+) 7 (–) SINGLE POLE SWITCHES ONLY J 1 DOWN 3 (+) 8 (–) 2 INDEPENDENT 6 (+) 7 (–) K 1 INDEPENDENT 8 (+) 7 (–) 2 INDEPENDENT 6 (+) 7 (–) DOUBLE POLE SWITCHES ONLY L 1 DOWN 3 (+) 6 (–) M 1 UP 3 (+) 6 (–) N 1 DOWN 3 (+) 6 (–) 2 DOWN 1 (+) 4 (–) P 1 UP 1 (+) 4 (–) 2 UP 3 (+) 6 (–) U 1 INDEPENDENT 8 (+) 7 (–) 2 INDEPENDENT 10 (+) 9 (–) 11 ACTUATOR COLOR1 O N/A - No Actuator CBlack SRed YWhite 12 ACTUATOR LENS or BODY LEGEND2 00 - No Legend this location/No actuator 11ON 12 OFF 13 I 14O OFF ONO I 15 O O 16 O O F N N F FF 17 O I 18 I O 13 LEGEND ORIENTATION 0 1 2 3 4 No legend Orientation 1 Orientation 2 Orientation 3 Orientation 4 1 2 3 4 14 ACTUATOR / LENS LEGEND 00 No legend this location / no actuator (used with codes 11-18 in selection 12) Selection 14 required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection 12; body legend specified in selection 14. For legend options & codes, visit us at www.carlingtech.com. Notes: Consult factory to verify horsepower rating for your particular circuit choice. 1 Custom colors are available. Consult factory. 2 White imprinting is standard on black actuators; Black imprinting is standard on white, red and gray actuators. 3 Additional ratings available. See V-Series Switch Accessories page. Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com 8 | V-Series Contura Sealed Rocker Switch Actuators Separately Reduce inventory levels and cost by stocking actuators and base switches separately. Contura II, III, IV, V, VI, VII, X, XI, XII, XIV Base switches separately: specify V with code selections 2-8 in the ordering schemes. Contura II, III, IV, V Actuator only: VV with code A or C for selection 9, & with selections 10-14 in the ordering schemes. Contura VI Actuator with lenses and inserts only: VV with code selections 9-16 Contura II, III, IV, V, VII Actuator only: VV with code A, C, E, G, P or Z for selection 9 & with selections 10-14 in the ordering schemes. Contura X, XI, XII, XIV actuators with lenses separately: VV with code selections 9-14 in the ordering schemes. Panel Seal: VPS Contura X & XI actuators without lenses separately: VVR 6 1 00 1 1 Actuator Separately 4 Actuator Legend 2 3 Actuator Lens Style/Color Opening 5 Legend Orientation 2 ACTUATOR STYLE & COLOR 3 LENS OPENING FOR1 1 2 3 4 5 One bar lens One bar lenses One square lens two square lens 15 O O 16 O O F N N F F F 17 O I J Black Z No lens square lens on top/ bar lens on bottom (Contura X only) 6 7 Legend Legend Orientation 5 Legend N White 1 Bar lens 00 - No Legend 21 OFF 22 25 O F F 26 O N M Red 2 Square lens 5, 7 LENS OR BODY LEGEND2 14 O I 23 ON O 27 O 24 I 28 I For additional legend options & codes, visit us at www.carlingtech.com. 18 I O ORIENTATION OF ACTUATOR/LENS IN PANEL 6 LEGEND ORIENTATION3 0 No legend 1 Orientation 1 2 Orientation 2 ORIENTATION OF ACTUATOR/LENS IN PANEL 5 LEGEND ORIENTATION1 No legend Orientation 1 Orientation 2 Orientation 3 Orientation 4 K Gray 3,4 LENS OPENING FOR For additional legend options & codes, visit us at www.carlingtech.com. 0 1 2 3 4 4 Lens Opening 3 Lens Opening 2 ACTUATOR STYLE & COLOR Red 4 9 4 ACTUATOR LENS OR BODY LEGEND 00 - No Legend this location 11 ON 12 OFF 13 I OFF ON O 2 Style & Color 1 CONTURA XII ACTUATOR SEPARATELY VVP White 3 8 Gray 2 7 Black 1 6 VVP J 1 Z 21 1 00 1 Actuator 1 CONTURA X & XI ACTUATOR SEPARATELY VVP Contura X Contura XI Contura XII actuators without lenses separately: ORIENTATION 2 Contura X, XI & XII actuator lens assembly separately: ORIENTATION 1 ORIENTATION 4 ORIENTATION 1 VVL 2 1 00 0 ORIENTATION 2 1 Lens Separately ORIENTATION 3 2 Lens Style 4 Legend 3 Lens Color 5 Legend Orientation 1 CONTURA X, XI & XII LENS SEPARATELY VVL Contura X, XI & XII top piece of 2-piece lens separately: VVT 1 1 Lens Separately 1 TOP OF LENS SEPARATELY VVT 1 Clear 2 Smoke 3 White Contura X, XI & XII actuator lens assembly: top lens actuator stem posts mount toward actuator stem bottom lens } two piece lens assembly 1 piece lens/bar lens are positioned the same as bottom lens for assembly, minus the top lens. Lenses snap in from bottom. Notes: 1 If actuator lens opening for 2 bar or 2 square lenses, legend orientation 0,1, or 2 must be chosen. 2 Center of actuator marking not available for Contura XII. 3 Legend is not available for bar style lens. 4 Not recommended with neon lamps. 5 Must also order top piece of 2 piece square lens separately. 2 One Piece Square lens 3 Bottom of Two-Piece Square lens5 3 TRANSLUCENT LENS COLOR 1 Clear 2 COLOR 2 Color 2 LENS STYLE3 1 Bar lens 2 White 3 Amber 4 Green4 4 LENS OR BODY LEGEND2 00 - No Legend 21 OFF 22 25 O F F 26 O N ON 23 5 Red O 27 O 24 6 Blue4 I 28 I For additional legend options & codes, visit us at www.carlingtech.com. ORIENTATION OF ACTUATOR/LENS IN PANEL 5 LEGEND ORIENTATION3 0 1 2 3 4 No legend Orientation 1 Orientation 2 Orientation 3 Orientation 4 ORIENTATION 1 ORIENTATION 4 ORIENTATION 2 ORIENTATION 3 Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com V-Series Contura Sealed Rocker Switch Accessories | 9 Easily integrate Contura products into your system, with Contura Accessories Q.C. SELECTION GUIDE Contura ConnectorsPART NO COMPANY SERIES WIRE RANGE Q.C. SELECTION TIN GUIDE PLAIN BRASS PART NO COMPANY SERIES ORIENTATION MM 2 AWG WIRE RANGE PLATED BRASS (REF) 12 3.0 ORIENTIN 2 TATION PLAIN 02965471 AWG(2)16-14 PLATED Q.C. SELECTION Q.C.12010601 SELECTION GUIDE Q.C. SELECTION GUIDE MM(2)1.0-2.0 GUIDE BRASS 02965470BRASS 16-14 (REF) 1.0-2.0 02965580 PACKARD 58 SERIES B WIRE WIRE WIRE PART NO PART NO RANGE PART 20-18 NO RANGE 02965580 12 3.0 02965469 06288318 .5-.8 RANGE COMPANY COMPANY ORIENORIENORIEN02965471 COMPANY 12010601 (2)16-14 102TIN (2)1.0-2.0 TIN TIN 5.0 2 12084590 PLAIN PLAIN PLAIN SERIES SERIES SERIES TATION TATION TATION AWG MM AWG MM AWG MM 2 PACKARD PLATED PLATED BRASS BRASS12052224 BRASS TANG 02965470 PLATED 16-14 (REF) 1.0-2.0(REF) B (REF) 12 3.0 BRASS BRASS BRASS 58 SERIES Q.C. SELECTION GUIDE 02965469 02965580 06288318 20-18 3.0 .5-.8 3.0 02965580 1202965580 12 12 3.0 12015870 16-14 1.0-2.0 WIRE PACKARD PART NO (2)16-14 12010601 12010601 120106015.0(2)1.0-2.0 02965471 (2)16-14 (2)16-14 (2)1.0-2.0 02965471 02965471 RANGE 10(2)1.0-2.0 12084590 12020035 (2)22-18 (2).5-.8 A METRI-PACK PACKARD PACKARD PACKARD COMPANY ORIENTANG B1.0-2.0 B 02965470 02965470 TIN16-14 02965470 1.0-2.0 16-14 16-14 12 GUIDE 3.0 B1.0-2.0 SERIES 58630 SERIES 58 SERIES PLAIN 58 12052224 SERIES SERIES TATION Q.C.PLATED SELECTION 12015869 20-18 .5-.8 12015832 AWG MM 2 .5-.8 02965469 06288318 02965469 20-18 06288318 02965469 .5-.8 20-18 06288318 20-18 .5-.8 BRASS12015870 (REF) 16-14 1.0-2.0 BRASS PACKARD WIRE 12052222 20-22 .35-.5 10 5.0 10 5.0 10 5.0 12084590 12084590 12084590 PART NO TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT 02965580 12 3.0 RANGE METRI-PACK (2)22-18 (2).5-.83.0 12 A 3.0 12020035 TANG TANG TANG 12052224 12052224 12052224 12 3.0 12 COMPANY 02965471 ORIEN16-12 1.3-3 12010601 (2)1.0-2.0 630 SERIES TIN (2)16-14 SYMBOL 60253-2 60253-1 12015832 12015869 20-18 .5-.8 2 16-14 PLAIN SERIES TATION 1.0-2.0 12015870 12015870 12015870 16-14 1.0-2.0 16-14 1.0-2.0 AMP PACKARD MM B 02965470 16-14AWG 1.0-2.0 PLATED PACKARD PACKARD PACKARD (2) 16 (2) 1.3 58 SERIES BRASS 250 SERIES (REF) (2)22-18 (2)22-18 A(2).5-.8 (2)22-18 A(2).5-.8B A 12020035 12020035 12020035 METRI-PACK METRI-PACK 02965469 METRI-PACK BRASS 20-22 .35-.5 12052222 06288318 20-18(2).5-.8 .5-.8 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT 630 SERIES 630 SERIES 630 SERIES42100-2 18-14 .8-2 FASTIN-FASTON 42100-1 02965580 3.0 .5-.8 12015869 12015869 12015869 20-18 .5-.8 20-18 20-18 .5-.8 12015832 12015832 12015832 10 12 5.0 12084590 16-12 1.3-3 SYMBOL 60253-1 60253-2 TANG 12010601 (2)1.0-2.0 02965471 20-22 .35-.5 20-22 .35-.5 20-22 .35-.5 12052222 1205222212(2)16-14 12052222 60295-2 22-18 .3-.9 60295-1 12052224 3.0 AMP TANG SYMBOL =TANGSHOWS SYMBOL =TANGSHOWS SYMBOL = ORIENTATION OFORIENTATION TANG IN SHOWS SLOT OFORIENTATION TANG IN SLOT OF TANG IN SLOT (2) 1616-14 (2)1.0-2.0 1.3 PACKARD 02965470 12015870 250 SERIES PACKARD 16-141.3-3 16-12 16-121.0-2.0 1.3-3 16-12 B B 1.3-3 58 SERIES SYMBOL SYMBOL SYMBOL 60253-2 60253-2 60253-2 60253-1 60253-1 60253-1 AMPConsult AMP AMP FASTIN-FASTON 42100-1 42100-2 18-14 .8-2 NOTE: Delphi Packard and/or Amp part numbers 02965469 06288318 20-18 .5-.8 (2)22-18 (2).5-.8 A 12020035 METRI-PACK (2) on 16 actual (2) 1.3 (2) 16 (2)and 1.3 (2) availability. 16 (2) 1.3 250 SERIES 250 SERIES 250 SERIES B B AMP630 is SERIES a registered trademark of12084590 AMP Inc. Harrisburg, PA 10 5.0 B.8-218-14 12015869 20-18 .5-.8 12015832 60295-1 60295-2 22-18 .3-.9 18-14 .8-218-14 .8-2 42100-2 42100-2 42100-2 FASTIN-FASTON FASTIN-FASTON 42100-1 42100-1 42100-1 TANGOhio Delphi Packard is a FASTIN-FASTON registered trademark Delphi-Packard Electrical Systems Warren, 12052224 of 20-22 12 .35-.5 3.0 .3-.9 12052222 22-18 .3-.9 22-18 22-18 .3-.9 60295-2 60295-2 60295-2 60295-1 60295-1 60295-1 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT 16-14 NOTE: Consult DelphiPACKARD Packard and/or Amp on12015870 actual part numbers and1.0-2.0 availability. 16-12 1.3-3 60253-2 60253-1 .820[20.83]SYMBOL AMP NOTE: Consult NOTE: Packard Consult and/or Delphi NOTE: Amp Packard Consult onAMP actual and/or Delphi partAmp numbers Packard on(2) actual and/or and part availability. numbers actual and part availability. numbers and availability. AMP is aDelphi registered trademark of Inc. Harrisburg, PAAmp (2)22-18 A 12020035 METRI-PACK 16 (2) on 1.3(2).5-.8 .820[20.83] SERIES AMP isPackard a 250 registered trademark is a registered of AMP AMP trademark Inc. is Harrisburg, a registered of AMP PA trademark Inc. Harrisburg, of AMP PAInc. Harrisburg, 630 AMP SERIES B PA Warren, Ohio Delphi is a registered trademark of Delphi-Packard Electrical Systems 12015869 12015832 18-1420-18 .8-2 .5-.8 42100-2 FASTIN-FASTON 42100-1 Delphi Packard is Delphi a registered Packard trademark is Delphi a registered ofPackard Delphi-Packard trademark is a registered of Electrical Delphi-Packard trademark Systems of Electrical Warren, Delphi-Packard Systems Ohio Electrical Warren, Ohio Systems Warren, Ohio 12052222 22-1820-22 .3-.9.35-.5 60295-2 60295-1 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT .820[20.83] .820[20.83] .820[20.83] .820[20.83] 16-12 1.3-3 .820[20.83] SYMBOL .820[20.83] .820[20.83] 60253-1 NOTE:.820[20.83] Consult Delphi Packard and/or Amp60253-2 on actual part numbers and availability. AMP (2) 16 (2) 1.3 AMP is a registered trademark of AMP Inc. Harrisburg, PA 250 SERIES B Delphi Packard is a registered of Delphi-Packard Systems Warren, Ohio 18-14 Electrical .8-2 42100-2 FASTIN-FASTON 42100-1 trademark 22-18 .3-.9 60295-2 60295-1 .820[20.83] .820[20.83] NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability. AMP is a registered trademark of AMP Inc. Harrisburg, PA .920[23.37] .920[23.37] Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio A .920[23.37] A PACKARD 630 PACKARD 630 A B .920[23.37] A B VC1 AMP, 58 AMP, PACKARD 58 PACKARD 630 PACKARD A VC1 B VC1 PACKARD 630 B .920[23.37] .920[23.37] .820[20.83] A A A PACKARD 630 PACKARDPACKARD 630 630 VC1 VC1 .920[23.37] PACKARD 630 VC1 VC1 VC1 B B A AMP, 58 AMP, PACKARD AMP, PACKARD 58 630 58 PACKARD AMP, PACKARD 58 PACKARD B .920[23.37] .820[20.83] .920[23.37] A VC2 PACKARD 630 B B .920[23.37] .920[23.37] A VC1 VC2 VC2 .920[23.37] AMP VC2 .770[19.56] AMP, PACKARD 58 AMPAMP, PACKARD 58 A PACKARD 630 B B AMP,1.266[32.16] PACKARD 58 1.266[32.16]AMP, PACKARD 1.266[32.16] 1.466[37.24] 1.466[37.24] .920[23.37] 58 AMP, PACKARD 58 AMP, PACKARD 58 10 3 1.266[32.16] 2 11083 2 1 8 7 4 7 541.466[37.24] 56 96 9 AMP .770[19.56] .770[19.56] 1.170[29.72] A VC2 VC2 VC2 AMPAMP AMP 5 AMP 679 PACKARD 630 B AMP A PACKARD VC2 AMP, 4 VC2 VC2 630 73 PACKARD 45 69 2 156 89 58 A A PACKARD 630 AMP, PACKARD 58 3 2 1 B 8 B 1.170[29.72] 1.170[29.72] 1.170[29.72] PACKARD 630 A PACKARD PACKARD 630 630 1.170[29.72] .950[24.13] .950[24.13] A .770[19.56] B PACKARD 630 B .770[19.56] .770[19.56] 1.170[29.72] A 10 10 3 23 1 28 10 2 1 784 1053 6729 417VC1 845B 56 96 9 10 73 4 2 51 689 10 3 32 1 2 8 1 7104 8 3 5 2 619 8 7 4 1 38 VC1 10 VC2 VC1 VC2 PACKARD 630 .770[19.56] A A A .950[24.13] .950[24.13] PACKARD 630 A A AMP, AMP, 58 PACKARD AMP, PACKARD PACKARD 58 PACKARD 630 B 58AMP, PACKARD .950[24.13] 1 87 4 5 7 3 4 235 1 62 8 .950[24.13] B AMP AMP 1.266[32.16] 1.266[32.16] 1.266[32.16] 1.466[37.24] 1.466[37.24] B 1.466[37.24] 1.250[31.75] B 1.250[31.75] .920[23.37] 1.466[37.24] 1.170[29.72] AMP AMP AMP, PACKARD 58 1.266[32.16] PACKARD 58 AMP, PACKARD 58 5 61.466[37.24] 9 AMP, 10 10 3 3 2 1 28 1 8 7 4 5 6 97 4 3 2 1 48 5 6 3 2 1 8 7 58 7 1.250[31.75]B B FRONT VIEW VC1 REAR VIEW VC2 FRONT VIEW B REAR VIEW .950[24.13] FRONT VIEW DETAIL MARKING DETAIL MARKING DETAIL VC2 MARKING DETAIL MARKING DETAIL MARKING DETAIL B B VC1 MARKING VC1 VC1AMP, PACKARD VCH VCH VC2 VC2 VCH AMP, PACKARD 58 58 AMP AMP AMP, VIEW PACKARD 58 AMP,VIEW PACKARD 58 FRONT REAR FRONT REAR REAR MARKING DETAIL DETAIL MARKING DETAILFRONT MARKING DETAIL 10 3VIEW 2 HOUSING 1 CONNECTOR 8 MARKING 7 4VIEW5 6 9CONNECTOR HOUSING 10 3 VIEW 2 DETAIL 1 8 HOUSING 7 HOUSING 4 VIEW 5 MARKING 69 CONNECTOR CONNECTOR CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR 3 HOUSING 2 CONNECTOR 1 8 7 4 5HOUSING 6 FRONT VIEW REAR VIEW FRONT FRONT VIEW (For AMP terminals only) (For AMP terminals only) REAR VIEW (For AMP VIEW terminals only) VC1 VC2 VCH VC1 1.266[32.16] CONNECTOR HOUSING CONNECTOR HOUSING VC1 MARKING DETAIL FRONT VIEW CONNECTOR HOUSING 1.466[37.24] MARKING DETAIL REAR VIEW Contura X Boot (P/N VB1-01) VC1 CONNECTOR HOUSING VC2 1.266[32.16] CONNECTOR HOUSING1.466[37.24] CONNECTOR HOUSING (For AMP terminals only)terminals only) (ForVC2 AMP MARKING DETAIL FRONT VIEW CONNECTOR HOUSING (For AMP terminals only) VC2 CONNECTOR HOUSING (For AMP terminals only) MARKING DETAIL REAR VIEW VCH 1.250[31.75] CONNECTOR CONNECTOR HOUSING VCH 4 5 6 AMP, PACKARD 58 HOUSING Additional V-Series Ratings VCH CONNECTOR HOUSING .757[19.23] [101.35] 3.99 [101.35] Contura II, III, IV & V3.99Actuator Removal Tool (P/N VRT) VRT VRT VRT VRT ACTUATOR REMOVAL ACTUATOR REMOVAL ACTUATOR REMOVAL ACTUATOR REMOVAL .900 [22.86].900 [22.86] .900 [22.86] .900TOOL [22.86] TOOL TOOL TOOL (For flush bracket) (For flush bracket) (For flush bracket) (For flush bracket) TOP TOP TOP TOP INSERT POINTS INSERT UNDER POINTS UNDER INSERT POINTS UNDER INSERT POINTS UNDER ACTUATOR ACTUATOR ACTUATOR ACTUATOR HOLD FLUSH ON BRACKET AND HOLD FLUSH ON BRACKET AND HOLD PUSH FLUSH ONPUSH BRACKET AND HOLD PUSH FLUSH ON BRACKET AND PUSH IN IN IN IN TOP TOP TOP TOP TOP INSERT POINTS UNDER ACTUATOR HOLD FLUSH ON BRACKET AND PUSH IN 3.99 [101.35] 3.99 [101.35] .900 [22.86] TOP VRT ACTUATOR REMOVAL TOOL (For flush bracket) TOP TOP INSERT POINTS UNDER INSERT POINTS UNDER ACTUATOR ACTUATOR HOLD FLUSH ON BRACKET AND PUSH HOLD FLUSH INON BRACKET AND PUSH IN TOP TOP .900 [22.86] .900 [22.86] 5 6 VRT VRT ACTUATOR REMOVAL ACTUATOR REMOVAL TOOL TOOL flush bracket) (For flush(For bracket) Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com DETAIL REAR VIEW MARKING DETAIL REAR VIEW MARKING DETAIL MARKING DETAIL FRONT VIEW CONNECTOR HOUSING REAR VIEW .757[19.23] .757[19.23] 3.99 [101.35] 3.99 [101.35] 4 7 4 5 6 MARKING DETAIL REAR VIEW MARKING 1 .4VA @ 28VDC Resistive 1.050[26.67] 1.050[26.67] 1.050[26.67] 4 10A 250VAC 1/2 HP, 15A 125 VAC 1/2 HP, No Agency Listings 1.050[26.67] B 15A 24V C 20A 18V VB1-01 VB1-01 VB1-01 2.000[50.80] 2.000[50.80] 2.000[50.80] CONTURA X BOOT CONTURA X BOOT 1.050[26.67] D VB1-01 20A 12V CONTURA X BOOT CONTURA X BOOT 2.000[50.80] 1.050[26.67] 1.050[26.67] E 20A 14V, 10A 14VT (circuits 1, 4, A, & D only) F 10A 14V, 6A, 14VT (circuit G only) VB1-01 G VB1-01 20A 6V .757[19.23] .757[19.23] .757[19.23] CONTURA X BOOT 2.000[50.80] 2.000[50.80] CONTURA X BOOT VB1-01 .757[19.23] H 20A 3V 2.000[50.80] CONTURA X BOOT 3.99 [101.35] 7 AMP, PACKARD 58 1.250[31.75] MARKING DETAIL AMARKING DETAIL MARKING MARKING DETAIL DETAIL MARKING DETAIL MARKING MARKING DETAIL DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING MARKING DETAIL MARKING DETAIL MARKING MARKING DETAIL DETAIL MARKING DETAIL A A DETAIL A PACKARD 630 PACKARD 630 FRONT VIEW 1.266[32.16] FRONT VIEW REAR1.466[37.24] FRONT VIEW VIEW REAR VIEW FRONT REARVIEW VIEW FRONT FRONT REAR VIEW VIEW REAR VIEWMARKING FRONT REAR VIEW VIEW FRONT VIEW REAR FRONT VIEW VIEW REAR VIEW 1.250[31.75] 1.266[32.16] 1.466[37.24] 1.466[37.24] VC2 VIEW PACKARD 630 DETAIL PACKARD 630 1.266[32.16] 1.266[32.16] 1.466[37.24] 1.250[31.75] MARKING DETAIL MARKING MARKING DETAIL DETAIL MARKING DETAIL VC1 B PACKARD 630 B AMP, PACKARD 58 6 PACKARD 630 PACKARD 630 10 | V-Series Contura Sealed Rocker Switch Accessories Contura Mounting Panels Dimensional Specifications: in. [mm] Contura Hole Plug Dimensional Specifications: in. [mm] 1.450 [36.83] .830 [21.08] TEST CUT HOLE IN ACTUAL MATERIAL VHP CONTURA II,III HOLE PLUG 1.240 [31.50] 1.820 [46.23] .430 [10.92] VHP CONTURA II,III HOLE PLUG VH1 STANDARD HOLE PLUG (No wing serrations) (With VC1 connector attached) 2.000 [50.80] VH2 STANDARD HOLE PLUG (With wing serrations) 1.067 [27.10] 1.928 [48.97] VH3 CONTURA IV HOLE PLUG (No wing serrations) VH4 CONTURA IV HOLE PLUG (With wing serrations) DETAIL VIEW VH1,VH3 & VH5 HOLE PLUGS (No wing serrations for ease of removal) 1.020 [25.91] VH5 CONTURA V HOLE PLUG (No wing serrations) VH6 CONTURA V HOLE PLUG (With wing serrations) DETAIL VIEW VH2,VH4 & VH6 HOLE PLUGS (With wing serrations) Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com Reps & Contact | 11 Authorized North America Sales Representatives Carling extensive sales representative network group is strategically located and ready to answer any questions. Find your local representative by clicking on a group name on the map below or by visiting www.carlingtech.com/findarep. « « Matera W. Canada WA TEMCO Northwest ND John Ammouneh Alaska, Hawaii « NORTHERN WI MN SD Sierra WY NE Omega Limited NV UT CA KS CO AZ Sunbelt Components DM Mexico « El Paco, Mexico VA NH Norris NY MA CT RI PA Pacent NJ DE MD TSI North TSI NC SC Pinnacle Marketing MS AL SOUTHEAST GA LA ProRep Solutions FL « « Matrix South America L D. Allen WV KY MO AR TX Central America IL ME VT DM Assoc East DM OH Assoc OK NM Patricia Ortiz IN TN Luscombe Engineering Signal Enterprises IA Dy-tronix Inc. Melody Emery MI ID Bridge Marketing WEST DM Michigan Hanna Lind Ltd. MT OR Matera E. Canada MIDWEST LATIN AMERICA About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. Email: [email protected] • Application Support: [email protected] Phone: (860) 793–9281 • Fax: (860) 793–9231• www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com East Region Sales Office, CT • [email protected] Midwest Region Sales Office, IL • [email protected] West Region Sales Office, CA • [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Int + 852-2737-2277 • Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China • [email protected] Shanghai, China • [email protected] Pune, India • [email protected] Kaohsiung, Taiwan • [email protected] Yokohama, Japan • [email protected] Europe / Middle East/Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Int + 44 1392-364422 • Fax: Int + 44 1392-364477 Email: [email protected] GmbH, Germany • [email protected] SAS, France • [email protected] REV_SW_V_07_2014