T543 Series

KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Overview
The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic
capacitor with a conductive polymer cathode capable of
delivering very low ESR and improved capacitance retention at
high frequencies. KO-CAP combines the low ESR of multilayer
ceramic, the high capacitance of aluminum electrolytic and the
volumetric efficiency of tantalum into a single surface mount
package. Unlike liquid electrolyte-based capacitors, KO-CAP has
a very long operational life and high ripple current capabilities.
The T543 COTS Polymer Electrolytic capacitor is an upscreened
version of the industrial T520 KO-CAP. The T543's upscreeed
option includes surge current testing of 10 cycles at +25°C and 10
cycles at −55°C/+85°C. In addition to 100% Tin (Sn) terminations
a Tin-lead (SnPb) option is also available. The recommended
application derating for these capacitors is 10 – 20%, rendering
them suitable for application voltages from 2.25 to 50 VDC.
Benefits
•
•
•
•
•
•
•
•
•
Extremely low ESR
High frequency capacitance retention
100% accelerated steady state aging
100% surge current tested
Taped and reeled per EIA 481
Volumetrically efficienct
Surge options at 25ºC and -55ºC/+85ºC
EIA standard case sizes
Halogen-Free Epoxy/RoHS Compliant
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include DC/DC converters, switch mode and point of load power supply, radar pulse capacitor and
telecommunications (mobile phone and base station). Other general applications include decoupling and filtering in applications
requiring low ESR or a benign failure mode.
When extreme temperatures and humidity are taken into account, polymer tantalum capacitors offer a number of advantages over
other types of capacitors. KEMET continues to investigate the behavior of polymer tantalum capacitors in extreme conditions. If you
have questions about using these capacitors in a specific environment or application, we suggest you contact your local KEMET
representative or Field Application Engineer. You may also refer to “Considerations for Polymer Capacitors in Extreme Environments”
located at www.kemet.com/ExtremePolymerPaper.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
1
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T
543
D
Capacitor
Class
Series
Case
Size
T=
Tantalum
Polymer
Tantalum
COTS
156
K
035
A
Capacitance Code Capacitance Rated Voltage Failure Rate/
(pF)
Tolerance
(VDC)
Design
A, B, C,
First two digits
D, H, L, represent significant
M, T, U, figures. Third digit
V, W, specifies number of
X, Y
zeros.
K = ±10%
M = ±20%
2R5 = 2.5
003 = 3
004 = 4
006 = 6.3
010 = 10
12R = 12.5
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
063 =63
A = N/A
H
E
100
Termination
Finish
Surge
ESR
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
Packaging
(C-Spec)
E = None
ESR in Blank = 7" Reel
S = 10 cycles mΩ 7280 = 13" Reel
25°C
W = 10
cycles -55°C
and 85°C
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
-55°C to 105°C
4.7 – 1,500 μF at 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
2.5 – 63 V
DF (120 Hz)
Refer to Part Number Electrical Specification Table
ESR (100 kHz)
Refer to Part Number Electrical Specification Table
Leakage Current
≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
2
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
Storage Life
Humidity
Temperature Stability
105°C at rated voltage, 2,000 hours
105°C at 0 volts, 2,000 hours
60°C, 90% RH, 500 hours
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +85ºC, +105ºC, +25º C
Δ C/C
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within 2.0 x initial limit
Δ C/C
Within -20/+10 of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within 2.0 x initial limit
Δ C/C
Within -5%/+35% of initial value
DF
Within initial limits
DCL
Within 5.0 x initial limit
ESR
Within 2.0 x initial limit
+25°C
-55°C
+85°C
+105°C
IL*
+/-20%
+/-20%
+/-30%
DF
IL
IL
1.2 x IL
1.5 x IL
DCL
IL
N/A
10 x IL
10 x IL
Δ C/C
Surge Voltage
Mechanical Shock/Vibration
Within -20/+10 of initial value
105°C, 1.32 x rated voltage, 1,000 cycles
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000
Hz, 20 G peak
Within -20/+10 of initial value
DF
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
Δ C/C
Within ±10 of initial value
DF
Within initial limits
DCL
Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
3
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Electrical Characteristics
ESR vs. Frequency
Impedance, ESR (Ohms)
100
T5430B157M006ATE035_Imp
T543C227M006ATE025_Imp
T543V337M006ATE015_Imp
T543D337M006ATE009_Imp
T543B157M006ATE035_ESR
T543C227M006ATE025_ESR
T543V337M006ATE015_ESR
T543D337M006ATE009_ESR
10
1
0.1
0.01
0.001
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
1,000,000
10,000,000
Capacitance vs. Frequency
Capacitance (µF)
1,000
100
10
1
T543B157M006ATE035
T543C227M006ATE025
T543V337M006ATE015
T543D337M006ATE009
100
1,000
10,000
100,000
Frequency (Hz)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
4
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Dimensions – Millimeters
CATHODE (-) END VIEW
SIDE VIEW
ANODE (+) END VIEW
BOTTOM VIEW
A
B
W
B
H
X
E
T
S
G
Case Size
KEMET
EIA
Termination cutout
at KEMET's option,
either end
S
P
R
Glue pad
shape/design at
KEMET's option
L
Component Dimensions
L
W
H
F ±0.1 S ±0.3 B ±0.15
±(0.004) ±(0.012) (Ref) ±0.006
X (Ref)
F
Weight
P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
0.4
(0.016)
0.13
(0.005)
(mg)
A
3.2 ±0.2
1.6 ±0.2
1.6 ±0.2
3216–18 (0.126
±0.008) (0.063 ±0.008) (0.063 ±0.008) 1.2 (0.047) 0.8 (0.031)
0.4 (0.016)
0.10 ±0.10
(0.004 ±0.004) 0.4 (.016)
B
3.5 ±0.2
2.8 ±0.2
1.9 ±0.1
3528–21 (0.138
±0.008) (0.110 ±0.008) (0.075 ±0.004) 2.2 (0.087) 0.8 (0.031)
0.4 (0.016)
0.10 ±0.10
1.0
(0.004 ±0.004) 0.5 (.020) (0.039)
0.13
2.2
(0.005) 1.1 (0.043) 1.8 (0.071) (0.087)
98.30
C
(0.236 3.2 ±0.3
2.5 ±0.3
6032–28 6.0 ±0.3
±0.012)
(0.126 ±0.012) (0.098 ±0.012) 2.2 (0.087) 1.3 (0.051)
0.5 (0.020)
0.10 ±0.10
1.0
(0.004 ±0.004) 0.9 (.035) (0.039)
0.13
(0.005)
2.4
2.5(.098) 2.8 (0.110) (0.094)
193.46
D
7.3 ±0.3
4.3 ±0.3
2.8 ±0.3
7343–31 (0.287
±0.012) (0.169 ±0.012) (0.110 ±0.012) 2.4 (0.094) 1.3 (0.051)
0.5 (0.020)
0.10 ±0.10
0.9
(0.004 ±0.004) (0.035)
1.0
(0.039)
0.13
(0.005)
3.8 (.150) 3.5 (0.138) 3.5 (0.138)
352.36
H
7.3 ±0.3
6.0±0.3
1.9 ±0.1
7360–20 (0.287
±0.012) (0.236 ±0.012) (0.075 ±0.004) 4.1 (0.161) 1.3 (0.051)
N/A
0.10 ±0.10
(0.004 ±0.004)
N/A
N/A
0.13
(0.005)
3.3 (.130) 3.5 (0.138) 3.5 (0.138)
366.62
L
(0.236 3.2 ±0.2
1.8 ±0.1
6032–19 6.0 ±0.3
±0.012)
(0.110 ±0.008) (0.071 ±0.004) 2.2 (0.087) 1.3 (0.051)
N/A
0.05 (0.002)
N/A
N/A
0.13
(0.005)
2.4
2.5(.098) 2.8 (0.110) (0.094)
No data
M
3.5 ±0.2
2.8 ±0.2
1.4 ±0.1
3528–15 (0.138
±0.008) (0.110 ±0.008) (0.055 ±0.004) 2.2 (0.087) 0.8 (0.031)
N/A
0.05 (0.002)
N/A
N/A
0.13
(0.005)
2.2
1.1 (.043) 1.8 (0.071) (0.087)
97.99
T
3.5 ±0.2
2.8 ±0.2
1.1 ±0.1
3528–12 (0.138
±0.008) (0.110 ±0.008) (0.043 ±0.004) 2.2 (0.087) 0.8 (0.031)
N/A
0.05 (0.002)
N/A
N/A
0.13
(0.005)
2.2
1.1 (.043) 1.8 (0.071) (0.087)
59.38
U
(0.236 3.2 ±0.2
1.4 ±0.1
6032–15 6.0 ±0.3
±0.012)
(0.110 ±0.008) (0.055 ±0.004) 2.2 (0.087) 1.3 (0.051)
N/A
0.05 (0.002)
N/A
N/A
0.13
(0.005)
2.4
2.5(.098) 2.8 (0.110) (0.094)
No data
V
7.3 ±0.3
4.3 ±0.3
1.9 ±0.1
7343–20 (0.287
±0.012) (0.169 ±0.012) (0.075 ±0.004) 2.4 (0.094) 1.3 (0.051)
N/A
0.05 (0.002)
N/A
N/A
0.13
(0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
262.90
W
7.3 ±0.3
4.3 ±0.3
1.4 ±0.1
7343–15 (0.287
±0.012) (0.169 ±0.012) (0.055 ±0.004) 2.4 (0.094) 1.3 (0.051)
N/A
0.05 (0.002)
N/A
N/A
0.13
(0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
222.94
X
7.3 ±0.3
4.3 ±0.3
4.0 ±0.3
7343–43 (0.287
±0.012) (0.169 ±0.012) (0.157 ±0.012) 2.4 (0.094) 1.3 (0.051)
0.5 (0.020)
0.10 ±0.10
1.7
(0.004 ±0.004) (0.067)
1.0
(0.039)
0.13
(0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
588.16
Y
7.3 ±0.3
4.3 ±0.3
3.8 ±0.2
7343–40 (0.287
±0.012) (0.169 ±0.012) (0.150 ±0.008) 2.4 (0.094) 1.3 (0.051)
0.5 (0.020)
0.10 ±0.10
1.7
(0.004 ±0.004) (0.067)
1.0
(0.039)
0.13
(0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
481.55
0.8 (.31) 1.1 (0.043) 1.3 (0.051)
53.17
Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or a notch.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
5
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
12
14
14
17
17
25
25
25
25
25
25
25
38
55
55
55
55
55
55
55
55
55
55
55
55
55
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
118
118
118
118
118
% at 25°C
120 Hz
Maximum
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
8
8
10
10
10
mΩ at 25°C
100 kHz
Maximum
90
40
70
70
80
40
70
80
25
35
40
70
55
25
30
35
55
70
55
25
45
25
15
25
45
40
35
45
70
12
25
15
18
25
45
15
25
40
15
18
25
40
6
7
25
25
45
18
5
6
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
47
56
56
68
68
100
100
100
100
100
100
100
150
220
220
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
A/3216-18
T/3528-12
T/3528-12
A/3216-18
A/3216-18
T/3528-12
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
C/6032-25
C/6032-25
W/7343-15
V/7343-20
V/7343-20
V/7343-20
D-7343-31
B/3528-21
B/3528-21
B/3528-21
L/6032-19
L/6032-19
C/6032-25
C/6032-25
C/6032-25
C/6032-25
W/7343-15
W/7343-15
W/7343-15
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
C/6032-25
C/6032-25
V/7343-20
D-7343-31
D-7343-31
T543A476(1)2R5A(2)(3)090
T543T566(1)2R5A(2)(3)040
T543T566(1)2R5A(2)(3)070
T543A686(1)2R5A(2)(3)070
T543A686(1)2R5A(2)(3)080
T543T107(1)2R5A(2)(3)040
T543T107(1)2R5A(2)(3)070
T543T107(1)2R5A(2)(3)080
T543B107(1)2R5A(2)(3)025
T543B107(1)2R5A(2)(3)035
T543B107(1)2R5A(2)(3)040
T543B107(1)2R5A(2)(3)070
T543U157(1)2R5A(2)(3)055
T543B227(1)2R5A(2)(3)025
T543B227(1)2R5A(2)(3)030
T543B227(1)2R5A(2)(3)035
T543B227(1)2R5A(2)(3)055
T543B227(1)2R5A(2)(3)070
T543U227(1)2R5A(2)(3)055
T543C227(1)2R5A(2)(3)025
T543C227(1)2R5A(2)(3)045
T543W227(1)2R5A(2)(3)025
T543V227(1)2R5A(2)(3)015
T543V227(1)2R5A(2)(3)025
T543V227(1)2R5A(2)(3)045
T543D227(1)2R5A(2)(3)040
T543B337(1)2R5A(2)(3)035
T543B337(1)2R5A(2)(3)045
T543B337(1)2R5A(2)(3)070
T543L337(1)2R5A(2)(3)012
T543L337(1)2R5A(2)(3)025
T543C337(1)2R5A(2)(3)015
T543C337(1)2R5A(2)(3)018
T543C337(1)2R5A(2)(3)025
T543C337(1)2R5A(2)(3)045
T543W337(1)2R5A(2)(3)015
T543W337(1)2R5A(2)(3)025
T543W337(1)2R5A(2)(3)040
T543V337(1)2R5A(2)(3)015
T543V337(1)2R5A(2)(3)018
T543V337(1)2R5A(2)(3)025
T543V337(1)2R5A(2)(3)040
T543D337(1)2R5A(2)(3)006
T543D337(1)2R5A(2)(3)007
T543D337(1)2R5A(2)(3)025
T543C477(1)2R5A(2)(3)025
T543C477(1)2R5A(2)(3)045
T543V477(1)2R5A(2)(3)018
T543D477(1)2R5A(2)(3)005
T543D477(1)2R5A(2)(3)006
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
1116
1620
1225
1265
1183
1620
1225
1146
2254
1905
1782
1347
1567
2254
2058
1905
1520
1347
1567
2569
1915
2683
3531
2735
2039
2372
1905
1680
1347
3536
2449
3317
3028
2569
1915
3464
2683
2121
3531
3223
2735
2162
6124
5669
3000
2569
1915
3223
6708
6124
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
6
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
118
118
118
118
140
170
170
170
170
170
170
170
170
170
170
250
250
250
250
250
250
250
250
375
375
30
30
30
30
45
45
45
45
99
99
99
141
141
204
204
204
204
300
300
300
450
6
13
13
19
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
mΩ at 25°C
100 kHz
Maximum
7
9
10
25
5
6
10
15
40
5
6
10
15
25
6
5
6
10
15
25
5
6
10
5
10
35
40
70
80
35
40
70
80
15
25
25
10
25
10
15
25
40
10
15
30
8
100
70
80
70
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
470
470
470
470
560
680
680
680
680
680
680
680
680
680
680
1000
1000
1000
1000
1000
1000
1000
1000
1500
1500
100
100
100
100
150
150
150
150
330
330
330
470
470
680
680
680
680
1000
1000
1000
1500
15
33
33
47
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T/3528-12
A/3216-18
A/3216-18
A/3216-18
T543D477(1)2R5A(2)(3)007
T543D477(1)2R5A(2)(3)009
T543D477(1)2R5A(2)(3)010
T543D477(1)2R5A(2)(3)025
T543D567(1)2R5A(2)(3)005
T543D687(1)2R5A(2)(3)006
T543D687(1)2R5A(2)(3)010
T543D687(1)2R5A(2)(3)015
T543D687(1)2R5A(2)(3)040
T543Y687(1)2R5A(2)(3)005
T543Y687(1)2R5A(2)(3)006
T543Y687(1)2R5A(2)(3)010
T543Y687(1)2R5A(2)(3)015
T543Y687(1)2R5A(2)(3)025
T543X687(1)2R5A(2)(3)006
T543Y108(1)2R5A(2)(3)005
T543Y108(1)2R5A(2)(3)006
T543Y108(1)2R5A(2)(3)010
T543Y108(1)2R5A(2)(3)015
T543Y108(1)2R5A(2)(3)025
T543X108(1)2R5A(2)(3)005
T543X108(1)2R5A(2)(3)006
T543X108(1)2R5A(2)(3)010
T543X158(1)2R5A(2)(3)005
T543X158(1)2R5A(2)(3)010
T543B107(1)003A(2)(3)035
T543B107(1)003A(2)(3)040
T543B107(1)003A(2)(3)070
T543B107(1)003A(2)(3)080
T543B157(1)003A(2)(3)035
T543B157(1)003A(2)(3)040
T543B157(1)003A(2)(3)070
T543B157(1)003A(2)(3)080
T543V337(1)003A(2)(3)015
T543V337(1)003A(2)(3)025
T543D337(1)003A(2)(3)025
T543D477(1)003A(2)(3)010
T543D477(1)003A(2)(3)025
T543D687(1)003A(2)(3)010
T543D687(1)003A(2)(3)015
T543D687(1)003A(2)(3)025
T543D687(1)003A(2)(3)040
T543X108(1)003A(2)(3)010
T543X108(1)003A(2)(3)015
T543X108(1)003A(2)(3)030
T543X158(1)003A(2)(3)008
T543T156(1)004A(2)(3)100
T543A336(1)004A(2)(3)070
T543A336(1)004A(2)(3)080
T543A476(1)004A(2)(3)070
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
5669
5000
4743
3000
6708
6124
4743
3873
2372
6943
6338
4909
4008
3105
6416
6943
6338
4909
4008
3105
7029
6416
4970
7029
4970
1905
1782
1347
1260
1905
1782
1347
1260
3531
2735
3000
4743
3000
4743
3873
3000
2372
4970
4058
2869
5557
1025
1265
1183
1265
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
7
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
19
19
27
27
27
27
27
27
27
40
40
40
40
40
40
40
40
40
60
60
60
60
60
60
60
60
60
60
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
132
132
132
% at 25°C
120 Hz
Maximum
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
8
8
10
mΩ at 25°C
100 kHz
Maximum
80
70
70
80
35
40
70
80
55
150
200
70
150
35
40
70
80
55
35
40
70
55
15
25
45
100
15
25
35
45
70
12
25
15
18
25
45
55
25
40
15
18
25
40
45
25
65
25
45
18
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
47
47
68
68
68
68
68
68
68
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
330
330
330
A/3216-18
T/3528-12
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
A/3216-18
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
B/3528-21
B/3528-21
B/3528-21
U/6032-15
C/6032-25
C/6032-25
C/6032-25
C/6032-25
V/7343-20
V/7343-20
B/3528-21
B/3528-21
B/3528-21
L/6032-19
L/6032-19
C/6032-25
C/6032-25
C/6032-25
C/6032-25
C/6032-25
W/7343-15
W/7343-15
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D-7343-31
D-7343-31
C/6032-25
C/6032-25
V/7343-20
T543A476(1)004A(2)(3)080
T543T476(1)004A(2)(3)070
T543T686(1)004A(2)(3)070
T543T686(1)004A(2)(3)080
T543B686(1)004A(2)(3)035
T543B686(1)004A(2)(3)040
T543B686(1)004A(2)(3)070
T543B686(1)004A(2)(3)080
T543U686(1)004A(2)(3)055
T543A107(1)004A(2)(3)150
T543A107(1)004A(2)(3)200
T543T107(1)004A(2)(3)070
T543T107(1)004A(2)(3)150
T543B107(1)004A(2)(3)035
T543B107(1)004A(2)(3)040
T543B107(1)004A(2)(3)070
T543B107(1)004A(2)(3)080
T543U107(1)004A(2)(3)055
T543B157(1)004A(2)(3)035
T543B157(1)004A(2)(3)040
T543B157(1)004A(2)(3)070
T543U157(1)004A(2)(3)055
T543C157(1)004A(2)(3)015
T543C157(1)004A(2)(3)025
T543C157(1)004A(2)(3)045
T543C157(1)004A(2)(3)100
T543V157(1)004A(2)(3)015
T543V157(1)004A(2)(3)025
T543B227(1)004A(2)(3)035
T543B227(1)004A(2)(3)045
T543B227(1)004A(2)(3)070
T543L227(1)004A(2)(3)012
T543L227(1)004A(2)(3)025
T543C227(1)004A(2)(3)015
T543C227(1)004A(2)(3)018
T543C227(1)004A(2)(3)025
T543C227(1)004A(2)(3)045
T543C227(1)004A(2)(3)055
T543W227(1)004A(2)(3)025
T543W227(1)004A(2)(3)040
T543V227(1)004A(2)(3)015
T543V227(1)004A(2)(3)018
T543V227(1)004A(2)(3)025
T543V227(1)004A(2)(3)040
T543V227(1)004A(2)(3)045
T543D227(1)004A(2)(3)025
T543D227(1)004A(2)(3)065
T543C337(1)004A(2)(3)025
T543C337(1)004A(2)(3)045
T543V337(1)004A(2)(3)018
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
1183
1225
1225
1146
1905
1782
1347
1260
1567
864
748
1225
837
1905
1782
1347
1260
1567
1905
1782
1347
1567
3317
2569
1915
1285
3531
2735
1905
1680
1347
3536
2449
3317
3028
2569
1915
1732
2683
2121
3531
3223
2735
2162
2039
3000
1861
2569
1915
3223
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
8
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
132
132
132
132
132
132
132
132
132
132
132
132
188
188
188
188
188
188
188
188
188
188
188
188
272
272
272
272
272
272
272
272
272
272
400
400
9
14
14
21
21
21
21
21
21
21
21
21
21
30
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
8
8
8
8
8
8
mΩ at 25°C
100 kHz
Maximum
25
40
5
6
7
9
10
12
15
25
40
45
6
10
12
15
18
25
40
5
6
10
25
40
25
5
10
15
25
5
6
10
15
35
6
10
100
90
100
70
80
120
70
25
35
40
70
80
100
150
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
470
470
470
470
470
470
680
680
680
680
680
680
680
680
680
680
1000
1000
15
22
22
33
33
33
33
33
33
33
33
33
33
47
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
D-7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T/3528-12
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-25
A/3216-18
T543V337(1)004A(2)(3)025
T543V337(1)004A(2)(3)040
T543D337(1)004A(2)(3)005
T543D337(1)004A(2)(3)006
T543D337(1)004A(2)(3)007
T543D337(1)004A(2)(3)009
T543D337(1)004A(2)(3)010
T543D337(1)004A(2)(3)012
T543D337(1)004A(2)(3)015
T543D337(1)004A(2)(3)025
T543D337(1)004A(2)(3)040
T543D337(1)004A(2)(3)045
T543D477(1)004A(2)(3)006
T543D477(1)004A(2)(3)010
T543D477(1)004A(2)(3)012
T543D477(1)004A(2)(3)015
T543D477(1)004A(2)(3)018
T543D477(1)004A(2)(3)025
T543D477(1)004A(2)(3)040
T543Y477(1)004A(2)(3)005
T543Y477(1)004A(2)(3)006
T543Y477(1)004A(2)(3)010
T543Y477(1)004A(2)(3)025
T543Y477(1)004A(2)(3)040
T543D687(1)004A(2)(3)025
T543Y687(1)004A(2)(3)005
T543Y687(1)004A(2)(3)010
T543Y687(1)004A(2)(3)015
T543Y687(1)004A(2)(3)025
T543X687(1)004A(2)(3)005
T543X687(1)004A(2)(3)006
T543X687(1)004A(2)(3)010
T543X687(1)004A(2)(3)015
T543X687(1)004A(2)(3)035
T543X108(1)004A(2)(3)006
T543X108(1)004A(2)(3)010
T543T156(1)006A(2)(3)100
T543A226(1)006A(2)(3)090
T543A226(1)006A(2)(3)100
T543A336(1)006A(2)(3)070
T543A336(1)006A(2)(3)080
T543A336(1)006A(2)(3)120
T543T336(1)006A(2)(3)070
T543B336(1)006A(2)(3)025
T543B336(1)006A(2)(3)035
T543B336(1)006A(2)(3)040
T543B336(1)006A(2)(3)070
T543B336(1)006A(2)(3)080
T543C336(1)006A(2)(3)100
T543A476(1)006A(2)(3)150
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
2735
2162
6708
6124
5669
5000
4743
4330
3873
3000
2372
2236
6124
4743
4330
3873
3536
3000
2372
6943
6338
4909
3105
2455
3000
6943
4909
4008
3105
7029
6416
4970
4058
2657
6416
4970
1025
1116
1058
1265
1183
966
1225
2254
1905
1782
1347
1260
1285
864
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
9
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
30
30
30
30
30
30
30
43
43
43
43
43
43
43
43
43
43
43
63
63
63
63
63
63
63
63
63
63
63
63
76
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
% at 25°C
120 Hz
Maximum
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
mΩ at 25°C
100 kHz
Maximum
70
80
25
35
40
70
80
150
70
150
25
35
40
70
80
55
70
100
70
25
35
40
45
70
55
25
45
40
15
45
35
70
150
25
35
45
70
45
55
12
25
15
25
45
55
25
40
15
18
25
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
47
47
47
47
47
47
47
68
68
68
68
68
68
68
68
68
68
68
100
100
100
100
100
100
100
100
100
100
100
100
120
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
U/6032-15
C/6032-25
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
C/6032-25
C/6032-25
W/7343-15
V/7343-20
V/7343-20
B/3528-21
M/3528-15
M/3528-15
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
U/6032-15
L/6032-19
L/6032-19
C/6032-25
C/6032-25
C/6032-25
C/6032-25
W/7343-15
W/7343-15
V/7343-20
V/7343-20
V/7343-20
T543T476(1)006A(2)(3)070
T543T476(1)006A(2)(3)080
T543B476(1)006A(2)(3)025
T543B476(1)006A(2)(3)035
T543B476(1)006A(2)(3)040
T543B476(1)006A(2)(3)070
T543B476(1)006A(2)(3)080
T543A686(1)006A(2)(3)150
T543T686(1)006A(2)(3)070
T543T686(1)006A(2)(3)150
T543B686(1)006A(2)(3)025
T543B686(1)006A(2)(3)035
T543B686(1)006A(2)(3)040
T543B686(1)006A(2)(3)070
T543B686(1)006A(2)(3)080
T543U686(1)006A(2)(3)055
T543U686(1)006A(2)(3)070
T543C686(1)006A(2)(3)100
T543T107(1)006A(2)(3)070
T543B107(1)006A(2)(3)025
T543B107(1)006A(2)(3)035
T543B107(1)006A(2)(3)040
T543B107(1)006A(2)(3)045
T543B107(1)006A(2)(3)070
T543U107(1)006A(2)(3)055
T543C107(1)006A(2)(3)025
T543C107(1)006A(2)(3)045
T543W107(1)006A(2)(3)040
T543V107(1)006A(2)(3)015
T543V107(1)006A(2)(3)045
T543B127(1)006A(2)(3)035
T543M157(1)006A(2)(3)070
T543M157(1)006A(2)(3)150
T543B157(1)006A(2)(3)025
T543B157(1)006A(2)(3)035
T543B157(1)006A(2)(3)045
T543B157(1)006A(2)(3)070
T543U157(1)006A(2)(3)045
T543U157(1)006A(2)(3)055
T543L157(1)006A(2)(3)012
T543L157(1)006A(2)(3)025
T543C157(1)006A(2)(3)015
T543C157(1)006A(2)(3)025
T543C157(1)006A(2)(3)045
T543C157(1)006A(2)(3)055
T543W157(1)006A(2)(3)025
T543W157(1)006A(2)(3)040
T543V157(1)006A(2)(3)015
T543V157(1)006A(2)(3)018
T543V157(1)006A(2)(3)025
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
1225
1146
2254
1905
1782
1347
1260
864
1225
837
2254
1905
1782
1347
1260
1567
1389
1285
1225
2254
1905
1782
1680
1347
1567
2569
1915
2121
3531
2039
1905
1309
894
2254
1905
1680
1347
1732
1567
3536
2449
3317
2569
1915
1732
2683
2121
3531
3223
2735
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
10
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
95
95
95
95
95
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
296
296
296
296
296
296
% at 25°C
120 Hz
Maximum
10
10
10
10
10
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
mΩ at 25°C
100 kHz
Maximum
40
45
15
25
55
35
45
70
15
18
25
45
18
25
40
5
6
7
9
10
15
18
25
40
50
15
18
25
40
45
6
9
10
15
18
25
40
45
5
6
10
15
25
40
55
35
55
15
25
30
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
B/3528-21
B/3528-21
B/3528-21
C/6032-25
C/6032-25
C/6032-25
C/6032-25
V/7343-20
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
W/7343-15
W/7343-15
V/7343-20
D-7343-31
D-7343-31
D-7343-31
T543V157(1)006A(2)(3)040
T543V157(1)006A(2)(3)045
T543D157(1)006A(2)(3)015
T543D157(1)006A(2)(3)025
T543D157(1)006A(2)(3)055
T543B227(1)006A(2)(3)035
T543B227(1)006A(2)(3)045
T543B227(1)006A(2)(3)070
T543C227(1)006A(2)(3)015
T543C227(1)006A(2)(3)018
T543C227(1)006A(2)(3)025
T543C227(1)006A(2)(3)045
T543V227(1)006A(2)(3)018
T543V227(1)006A(2)(3)025
T543V227(1)006A(2)(3)040
T543D227(1)006A(2)(3)005
T543D227(1)006A(2)(3)006
T543D227(1)006A(2)(3)007
T543D227(1)006A(2)(3)009
T543D227(1)006A(2)(3)010
T543D227(1)006A(2)(3)015
T543D227(1)006A(2)(3)018
T543D227(1)006A(2)(3)025
T543D227(1)006A(2)(3)040
T543D227(1)006A(2)(3)050
T543V337(1)006A(2)(3)015
T543V337(1)006A(2)(3)018
T543V337(1)006A(2)(3)025
T543V337(1)006A(2)(3)040
T543V337(1)006A(2)(3)045
T543D337(1)006A(2)(3)006
T543D337(1)006A(2)(3)009
T543D337(1)006A(2)(3)010
T543D337(1)006A(2)(3)015
T543D337(1)006A(2)(3)018
T543D337(1)006A(2)(3)025
T543D337(1)006A(2)(3)040
T543D337(1)006A(2)(3)045
T543Y337(1)006A(2)(3)005
T543Y337(1)006A(2)(3)006
T543Y337(1)006A(2)(3)010
T543Y337(1)006A(2)(3)015
T543Y337(1)006A(2)(3)025
T543Y337(1)006A(2)(3)040
T543W477(1)006A(2)(3)055
T543W477(1)006A(2)(3)035
T543V477(1)006A(2)(3)055
T543D477(1)006A(2)(3)015
T543D477(1)006A(2)(3)025
T543D477(1)006A(2)(3)030
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
2162
2039
3873
3000
2023
1905
1680
1347
3317
3028
2569
1915
3223
2735
2162
6708
6124
5669
5000
4743
3873
3536
3000
2372
2121
3531
3223
2735
2162
2039
6124
5000
4743
3873
3536
3000
2372
2236
6943
6338
4909
4008
3105
2455
1809
2268
1844
3873
3000
2739
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
85
85
85
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
11
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
296
296
296
296
296
296
296
296
296
296
296
296
428
428
630
945
26
26
26
26
26
26
26
38
38
120
120
120
120
10
15
22
22
33
33
33
33
33
33
33
33
47
47
47
47
68
68
68
68
68
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
10
10
10
10
10
10
10
10
20
20
8
8
8
8
8
8
8
8
8
10
10
10
10
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
mΩ at 25°C
100 kHz
Maximum
5
10
15
18
25
35
5
6
10
18
35
40
10
18
55
55
70
80
25
35
40
70
70
35
70
40
25
40
55
80
80
80
80
70
80
25
35
40
70
80
70
35
70
55
100
55
45
25
40
25
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
470
470
470
470
470
470
470
470
470
470
470
470
680
680
1000
1500
33
33
33
33
33
33
33
47
47
150
150
150
150
10
15
22
22
33
33
33
33
33
33
33
33
47
47
47
47
68
68
68
68
68
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
H/7360-20
H/7360-20
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
B/3528-21
B/3528-21
V/7343-20
D-7343-31
D-7343-31
D-7343-31
A/3216-18
A/3216-18
A/3216-18
B/3528-21
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
B/3528-21
B/3528-21
U/6032-15
C/6032-25
U/6032-15
C/6032-25
W/7343-15
W/7343-15
V/7343-20
T543Y477(1)006A(2)(3)005
T543Y477(1)006A(2)(3)010
T543Y477(1)006A(2)(3)015
T543Y477(1)006A(2)(3)018
T543Y477(1)006A(2)(3)025
T543Y477(1)006A(2)(3)035
T543X477(1)006A(2)(3)005
T543X477(1)006A(2)(3)006
T543X477(1)006A(2)(3)010
T543X477(1)006A(2)(3)018
T543X477(1)006A(2)(3)035
T543X477(1)006A(2)(3)040
T543X687(1)006A(2)(3)010
T543X687(1)006A(2)(3)018
T543H108(1)006A(2)(3)055
T543H158(1)006A(2)(3)055
T543T336(1)008A(2)(3)070
T543T336(1)008A(2)(3)080
T543B336(1)008A(2)(3)025
T543B336(1)008A(2)(3)035
T543B336(1)008A(2)(3)040
T543B336(1)008A(2)(3)070
T543U336(1)008A(2)(3)070
T543B476(1)008A(2)(3)035
T543B476(1)008A(2)(3)070
T543V157(1)008A(2)(3)040
T543D157(1)008A(2)(3)025
T543D157(1)008A(2)(3)040
T543D157(1)008A(2)(3)055
T543A106(1)010A(2)(3)080
T543A156(1)010A(2)(3)080
T543A226(1)010A(2)(3)080
T543B226(1)010A(2)(3)080
T543T336(1)010A(2)(3)070
T543T336(1)010A(2)(3)080
T543B336(1)010A(2)(3)025
T543B336(1)010A(2)(3)035
T543B336(1)010A(2)(3)040
T543B336(1)010A(2)(3)070
T543B336(1)010A(2)(3)080
T543U336(1)010A(2)(3)070
T543B476(1)010A(2)(3)035
T543B476(1)010A(2)(3)070
T543U476(1)010A(2)(3)055
T543C476(1)010A(2)(3)100
T543U686(1)010A(2)(3)055
T543C686(1)010A(2)(3)045
T543W686(1)010A(2)(3)025
T543W686(1)010A(2)(3)040
T543V686(1)010A(2)(3)025
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
6943
4909
4008
3659
3105
2624
7029
6416
4970
3704
2657
2485
4970
3704
1844
1844
1225
1146
2254
1905
1782
1347
1389
1905
1347
2162
3000
2372
2023
1183
1183
1183
1260
1225
1146
2254
1905
1782
1347
1260
1389
1905
1347
1567
1285
1567
1915
2683
2121
2735
105
105
105
105
105
105
105
105
105
105
105
105
105
105
85
85
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
12
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
68
68
68
68
68
100
100
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
13
19
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
8
8
8
10
10
10
10
10
10
10
10
10
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
8
mΩ at 25°C
100 kHz
Maximum
40
45
60
100
100
150
25
25
45
40
18
25
45
50
18
25
55
80
55
25
40
5
6
10
15
18
25
40
55
18
25
25
45
6
10
18
25
40
6
10
40
15
35
5
6
10
25
40
150
80
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12.5
12.5
68
68
68
68
68
100
100
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
10
15
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D-7343-31
B/3528-21
L/6032-19
C/6032-25
C/6032-25
W/7343-15
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
D-7343-31
C/6032-25
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
Y/7343-40
Y/7343-40
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T/3528-12
T/3528-12
T543V686(1)010A(2)(3)040
T543V686(1)010A(2)(3)045
T543V686(1)010A(2)(3)060
T543V686(1)010A(2)(3)100
T543D686(1)010A(2)(3)100
T543B107(1)010A(2)(3)150
T543L107(1)010A(2)(3)025
T543C107(1)010A(2)(3)025
T543C107(1)010A(2)(3)045
T543W107(1)010A(2)(3)040
T543V107(1)010A(2)(3)018
T543V107(1)010A(2)(3)025
T543V107(1)010A(2)(3)045
T543V107(1)010A(2)(3)050
T543D107(1)010A(2)(3)018
T543D107(1)010A(2)(3)025
T543D107(1)010A(2)(3)055
T543D107(1)010A(2)(3)080
T543C157(1)010A(2)(3)055
T543V157(1)010A(2)(3)025
T543V157(1)010A(2)(3)040
T543D157(1)010A(2)(3)005
T543D157(1)010A(2)(3)006
T543D157(1)010A(2)(3)010
T543D157(1)010A(2)(3)015
T543D157(1)010A(2)(3)018
T543D157(1)010A(2)(3)025
T543D157(1)010A(2)(3)040
T543D157(1)010A(2)(3)055
T543Y157(1)010A(2)(3)018
T543Y157(1)010A(2)(3)025
T543V227(1)010A(2)(3)025
T543V227(1)010A(2)(3)045
T543D227(1)010A(2)(3)006
T543D227(1)010A(2)(3)010
T543D227(1)010A(2)(3)018
T543D227(1)010A(2)(3)025
T543D227(1)010A(2)(3)040
T543Y227(1)010A(2)(3)006
T543Y227(1)010A(2)(3)010
T543Y227(1)010A(2)(3)040
T543Y337(1)010A(2)(3)015
T543Y337(1)010A(2)(3)035
T543X337(1)010A(2)(3)005
T543X337(1)010A(2)(3)006
T543X337(1)010A(2)(3)010
T543X337(1)010A(2)(3)025
T543X337(1)010A(2)(3)040
T543T106(1)12RA(2)(3)150
T543T156(1)12RA(2)(3)080
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
2162
2039
1765
1367
1500
920
2449
2569
1915
2121
3223
2735
2039
1934
3536
3000
2023
1677
1732
2735
2162
6708
6124
4743
3873
3536
3000
2372
2023
3659
3105
2735
2039
6124
4743
3536
3000
2372
6338
4909
2455
4008
2624
7029
6416
4970
3143
2485
837
1146
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
13
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
413
16
35
53
53
53
53
75
75
75
75
75
75
75
109
109
160
160
160
240
240
240
240
352
352
528
528
44
44
44
44
44
44
66
94
94
94
200
200
25
38
38
38
55
55
55
83
83
170
170
% at 25°C
120 Hz
Maximum
10
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
mΩ at 25°C
100 kHz
Maximum
15
100
80
45
45
60
70
45
45
70
80
35
65
70
50
90
50
35
50
15
25
40
80
35
80
25
50
40
45
90
40
45
90
60
55
90
55
35
50
100
90
60
80
75
60
90
60
60
35
50
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
12.5
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
330
10
22
33
33
33
33
47
47
47
47
47
47
47
68
68
100
100
100
150
150
150
150
220
220
330
330
22
22
22
22
22
22
33
47
47
47
100
100
10
15
15
15
22
22
22
33
33
68
68
X/7343-43
B/3528-21
C/6032-25
W/7343-15
V/7343-20
V/7343-20
V/7343-20
W/7343-15
V/7343-20
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
V/7343-20
V/7343-20
V/7343-20
D-7343-31
D-7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
D-7343-31
D-7343-31
D-7343-31
D-7343-31
V/7343-20
V/7343-20
D-7343-31
X/7343-43
X/7343-43
B/3528-21
V/7343-20
D-7343-31
D-7343-31
D-7343-31
V/7343-20
V/7343-20
V/7343-20
D-7343-31
X/7343-43
X/7343-43
T543X337(1)12RA(2)(3)015
T543B106(1)016A(2)(3)100
T543C226(1)016A(2)(3)080
T543W336(1)016A(2)(3)045
T543V336(1)016A(2)(3)045
T543V336(1)016A(2)(3)060
T543V336(1)016A(2)(3)070
T543W476(1)016A(2)(3)045
T543V476(1)016A(2)(3)045
T543V476(1)016A(2)(3)070
T543V476(1)016A(2)(3)080
T543D476(1)016A(2)(3)035
T543D476(1)016A(2)(3)065
T543D476(1)016A(2)(3)070
T543V686(1)016A(2)(3)050
T543V686(1)016A(2)(3)090
T543V107(1)016A(2)(3)050
T543D107(1)016A(2)(3)035
T543D107(1)016A(2)(3)050
T543X157(1)016A(2)(3)015
T543X157(1)016A(2)(3)025
T543X157(1)016A(2)(3)040
T543X157(1)016A(2)(3)080
T543X227(1)016A(2)(3)035
T543X227(1)016A(2)(3)080
T543X337(1)016A(2)(3)025
T543X337(1)016A(2)(3)050
T543V226(1)020A(2)(3)040
T543V226(1)020A(2)(3)045
T543V226(1)020A(2)(3)090
T543D226(1)020A(2)(3)040
T543D226(1)020A(2)(3)045
T543D226(1)020A(2)(3)090
T543D336(1)020A(2)(3)060
T543V476(1)020A(2)(3)055
T543V476(1)020A(2)(3)090
T543D476(1)020A(2)(3)055
T543X107(1)020A(2)(3)035
T543X107(1)020A(2)(3)050
T543B106(1)025A(2)(3)100
T543V156(1)025A(2)(3)090
T543D156(1)025A(2)(3)060
T543D156(1)025A(2)(3)080
T543D226(1)025A(2)(3)075
T543V226(1)025A(2)(3)060
T543V226(1)025A(2)(3)090
T543V336(1)025A(2)(3)060
T543D336(1)025A(2)(3)060
T543X686(1)025A(2)(3)035
T543X686(1)025A(2)(3)050
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
4058
1127
1436
2000
2039
1765
1634
2000
2039
1634
1529
2535
1861
1793
1934
1441
1934
2535
2121
4058
3143
2485
1757
2657
1757
3143
2223
2162
2039
1441
2372
2236
1581
1936
1844
1441
2023
2657
2223
1127
1441
1936
1677
1732
1765
1441
1765
1936
2657
2223
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
14
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at VR , 25°C
Maximum/
5 Minutes
250
53
53
53
53
116
165
165
28
28
34
50
90
90
110
110
165
165
50
50
30
30
30
63
63
63
63
95
95
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
mΩ at 25°C
100 kHz
Maximum
60
100
125
100
125
65
30
60
70
90
65
90
35
70
40
75
40
75
100
120
75
100
120
50
75
100
150
35
50
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
25
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
63
63
63
63
63
63
63
63
63
100
15
15
15
15
33
47
47
5.6
5.6
6.8
10
18
18
22
22
33
33
10
10
4.7
4.7
4.7
10
10
10
10
15
15
X/7343-43
V/7343-20
V/7343-20
D-7343-31
D-7343-31
X/7343-43
X/7343-43
X/7343-43
D-7343-31
D-7343-31
V/7343-20
D-7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D-7343-31
D-7343-31
D-7343-31
D-7343-31
D-7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T543X107(1)025A(2)(3)060
T543V156(1)035A(2)(3)100
T543V156(1)035A(2)(3)125
T543D156(1)035A(2)(3)100
T543D156(1)035A(2)(3)125
T543X336(1)035A(2)(3)065
T543X476(1)035A(2)(3)030
T543X476(1)035A(2)(3)060
T543D565(1)050A(2)(3)070
T543D565(1)050A(2)(3)090
T543V685(1)050A(2)(3)065
T543D106(1)050A(2)(3)090
T543X186(1)050A(2)(3)035
T543X186(1)050A(2)(3)070
T543X226(1)050A(2)(3)040
T543X226(1)050A(2)(3)075
T543X336(1)050A(2)(3)040
T543X336(1)050A(2)(3)075
T543D106(1)050A(2)(3)100
T543D106(1)050A(2)(3)120
T543D475(1)063A(2)(3)075
T543D475(1)063A(2)(3)100
T543D475(1)063A(2)(3)120
T543X106(1)063A(2)(3)050
T543X106(1)063A(2)(3)075
T543X106(1)063A(2)(3)100
T543X106(1)063A(2)(3)150
T543X156(1)063A(2)(3)035
T543X156(1)063A(2)(3)050
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at VR , 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
Maximum
Maximum
Allowable
Operating
Ripple Current
Temp
MSL
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
2029
1367
1223
1500
1342
1949
2869
2029
1793
1581
1934
1581
2657
1878
2485
1815
2485
1815
1500
1369
1732
1500
1369
2223
1815
1572
1283
2657
2223
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mΩ at 25°C
100 kHz
Maximum
mA at 45°C
100 kHz
°C
Reflow Temp
≤ 260ºC
ESR
Maximum Allowable
Ripple Current
Maximum
Operating Temp
MSL
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
15
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Derating Guidelines
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
-55°C to 105°C
2.5 V ≤ VR ≤ 10 V
90% of VR
VR
12.5 V ≤ VR ≤ 63 V
80% of VR
VR
1
0.95
0.85
Recommended Application Voltage Vr ≤ 10V
0.8
0.75
Recommended Application Voltage Vr > 10V
0.7
0.65
0.6
0.55
0.5
VR = Rated Voltage
Maximum Transient Voltage
0.9
% Rated Voltage
Voltage Rating
Maximum
Recommended
Steady State
Voltage
-55
25
45
85
105
Temperature (°C)
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specified for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Ripple Current
T ≤ 45°C
1.00
45° C < T ≤ 85°C
0.70
85°C < T ≤ 105°C
0.25
Case Code
EIA
Case Code
A
B
C
D
H
L
M
T
U
V
W
X
Y
3216-18
3528-21
6032-28
7343-31
7360-20
6032-19
3528-15
3528-12
6032-15
7343-20
7343-15
7343-43
7343-40
Maximum Power
Dissipation (P max)
mWatts at 45°C
with +30°C Rise
112
127
165
225
187
150
120
105
135
187
180
247
241
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
16
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Reverse Voltage
Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature
Permissible Transient Reverse Voltage
25°C
55°C
85°C
105°C
125°C*
15% of Rated Voltage
10% of Rated Voltage
5% of Rated Voltage
3% of Rated Voltage
1% of Rated Voltage
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Case
A
B
C
D
L
M
H
T
U
V
W
EIA
3216–18
3528–21
6032–25
7343–31
6032-19
3528-15
7360-20
3528–12
6032–15
7343–20
7343–15
W
1.35
2.35
2.35
2.55
2.35
2.35
4.25
2.35
2.35
2.55
2.55
L
2.20
2.21
2.77
2.77
2.77
2.20
2.77
2.20
2.77
2.77
2.77
S
0.62
0.92
2.37
3.67
2.37
0.92
3.67
0.92
2.37
3.67
3.67
V1
6.02
6.32
8.92
10.22
8.92
6.32
10.22
6.32
8.92
10.22
10.22
V2
2.80
4.00
4.50
5.60
4.50
4.00
7.30
4.00
4.50
5.60
5.60
W
1.23
2.23
2.23
2.43
2.23
2.23
4.13
2.23
2.23
2.43
2.43
L
1.80
1.80
2.37
2.37
2.37
1.80
2.37
1.80
2.37
2.37
2.37
S
0.82
1.12
2.57
3.87
2.57
1.12
3.87
1.12
2.57
3.87
3.87
V1
4.92
5.22
7.82
9.12
7.82
5.22
9.12
5.22
7.82
9.12
9.12
V2
2.30
3.50
4.00
5.10
4.00
3.50
6.80
3.50
4.00
5.10
5.10
W
1.13
2.13
2.13
2.33
2.13
2.13
4.03
2.13
2.13
2.33
2.33
L
1.42
1.42
1.99
1.99
1.99
1.42
1.99
1.42
1.99
1.99
1.99
S
0.98
1.28
2.73
4.03
2.73
1.28
4.03
1.28
2.73
4.03
4.03
V1
4.06
4.36
6.96
8.26
6.96
4.36
8.26
4.36
6.96
8.26
8.26
V2
2.04
3.24
3.74
4.84
3.74
3.24
6.54
3.24
3.74
4.84
4.84
X1
Y1
7343–43
7343–40
2.55
2.55
2.77
2.77
3.67
3.67
10.22
10.22
5.60
5.60
2.43
2.43
2.37
2.37
3.87
3.87
9.12
9.12
5.10
5.10
2.33
2.33
1.99
1.99
4.03
4.03
8.26
8.26
4.84
4.84
Density Level A: For low-density product applications. Recommended for wave solder
applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a
robust solder attachment condition for reflow solder processes.
Density Level C: For high component desity product applications. Before adapting the
minimum land pattern variations the user should perform qualification testing based on
the conditions outlined in IPC standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2
Land pattern geometry is too small for silkscreen outline.
Density Level C:
Minimum (Least) Land
Protrusion (mm)
V1
L
L
W
W
V2
S
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
17
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Soldering Process
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profile (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Profile Feature
SnPb Assembly
Pb-Free Assembly
100°C
150°C
Preheat/Soak
Temperature Minimum (TSmin)
Temperature Maximum (TSmax)
150°C
200°C
Time (ts) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
Ramp-up Rate (TL to TP)
3°C/seconds maximum
3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t L)
60 – 150 seconds
60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
20 seconds maximum
30 seconds maximum
6°C/seconds maximum
6°C/seconds maximum
6 minutes maximum
8 minutes maximum
Time within 5°C of Maximum
Peak Temperature (tP)
Ramp-down Rate (TP to TL)
Time 25°C to Peak
Temperature
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
TL
Temperature
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase reflow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profile
conditions for convection and IR reflow reflect the profile conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
tL
Tsmax
Tsmin
25
tS
25ºC to Peak
Time
Storage
All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classified
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 90% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
18
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Construction
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Silver Paint
(Fourth Layer)
Polarity
Bevel (+)
Wire
Leadframe
(- Cathode)
Wire
Weld
(to attach wire)
Carbon
(Third Layer)
Silver Adhesive
Leadframe
(+ Anode)
Molded Epoxy
Case
Polymer
(Second Layer)
Ta2O5 Dielectric
(First Layer)
Tantalum
Capacitor Marking
Date Code *
KEMET
Multi-Anode
Polymer
Polarity
Indicator (+)
1 digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year
01 = 1st week of the Year to
52 = 52nd week of the Year
st
Picofarad
Code
KEMET
ID
Rated
Voltage
Date
Code*
* 230 = 30th week of 2012
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
19
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA
Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible
with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
180 mm (7.0")
or
330 mm (13.0")
Table 3 – Packaging Quantity
Case Code
KEMET
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
X
E/T428P
H
EIA
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
12
12
12
12
12
8
8
12
12
12
12
12
12
12
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
1,000
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
20
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØDo
Po
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E1
Ao
F
Ko
B1
S1
W
E2
Bo
P1
T1
Center Lines of Cavity
B 1 is for tape feeder reference only,
including draft concentric about B o.
Embossment
For cavity size,
see Note 1 Table 4
ØD 1
Cover Tape
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
8 mm
12 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
16 mm
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
B1 Maximum
Note 4
4.35
(0.171)
E1
P0
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
P2
2.0 ±0.05
(0.079 ±0.002)
2.0 ±0.1
(0.079 ±0.059)
R Reference
Note 2
25.0
(0.984)
30
(1.181)
S1 Minimum
T Maximum T1 Maximum
Note 3
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
E2 Minimum
F
8 mm
Single (4 mm)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
12 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
16 mm
Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
P1
2.0 ±0.05 or 4.0 ±0.10
(0.079 ±0.002 or 0.157 ±0.004)
2.0 ±0.05 (0.079 ±0.002) or 4.0
5.5 ±0.05
±0.10 (0.157 ±0.004) or 8.0 ±0.10
(0.217 ±0.002)
(0.315 ±0.004)
7.5±0.10
4.0 ±0.10 (0.157 ±0.004) to 12.0
(0.295 ±0.004)
±0.10 (0.472 ±0.004)
T2 Maximum
W Maximum A0, B0 & K0
2.5
(0.098)
8.3
(0.327)
4.6
(0.181)
12.3
(0.484)
8.0 (0.315)
16.3
(0.642)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
21
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8,12
16 – 200
Bo
Maximum
Rotation (
20
10
°
T)
Typical Component Centerline
Ao
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
16 mm Tape
°
s
Tape
Maximum
Width (mm) Rotation (
8,12
20
16 – 56
10
72 – 200
5
°
S)
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
R
T2061_T543 • 7/15/2015
22
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3 (Includes
Access Hole at
Slot Location
(Ø 40 mm minimum)
flange distortion
at outer edge)
W2 (Measured at hub)
D
A
(See Note)
N
C
(Arbor hole
diameter)
B
(see Note)
W1 (Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
Shall accommodate tape width
without interference
8 mm
12 mm
16 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
23
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
END
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm Minimum
Components
100 mm
Minimum Leader
400 mm Minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
24
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Wyboston, United Kingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
25
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T543 COTS Polymer Electrolytic, 2.5 – 63 VDC
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2061_T543 • 7/15/2015
26