T493 Series Commercial Off-The-Shelf (COTS) MnO

Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS)
MnO2 (CWR11 Style)
Overview
The KEMET T493 Series is designed for the Commercial
Off-The-Shelf (COTS) requirements of military and aerospace
applications. This series is a surface mount product
offering various lead-frame plating options, Weibull grading
options, surge current testing, F-Tech (an improved anode
manufacturing process) and Simulated Breakdown Voltage
(SBDV) screening options to improve long term reliability.
Standard, low, and ultra-low ESR options are available. All lots
of this series are conditioned with MIL–PRF–55365 Group A
testing. This series is also approved for DLA Drawing 07016
(please see part number list specific to this drawing).
KEMET’s F-Tech eliminates hidden defects in the dielectric
which continue to grow in the field, causing capacitor failures.
Based on the fundamental understanding of degradation
mechanisms in tantalum and niobium capacitors, F-Tech
incorporates multiple process methodologies. Some minimize
the oxygen and carbon content in the anodes which become
contaminants and can lead to the crystallization of the anodic
oxide dielectric. This process methodology reduces the
contaminants, improving quality of the dielectric. An additional
technology provides a stronger mechanical connection
point between the tantalum lead wire and tantalum anode,
enhancing robustness and product reliability. The benefit of
F-Tech is illustrated by a 2,000 hour, 85°C, 1.32 X rated voltage
accelerated life test. F-Tech parts see no degradation while
standard tantalum's have 1.5 orders of magnitude degradation in
leakage current. F-Tech is currently available for the T493 Series
(select D and X case capacitance values in 20 V and higher rated
voltage). Please contact KEMET for details on ordering other part
types with these capabilities.
KEMET’s patented Simulated Breakdown Screening (SBDS) is
a nondestructive testing technique that simulates the breakdown
voltage (BDV) of a capacitor without damage to its dielectric or
to the general population of capacitors. This screening identifies
hidden defects in the dielectric, providing the highest level of
dielectric testing. SBDS is based on the simulation of breakdown
voltage (BDV), the ultimate test of the dielectric in a capacitor.
Low BDV indicates defects in the dielectric, and therefore, a higher
probability of failure in the field. High BDV indicates a stronger
dielectric and high-reliability performance in the field.
This new screening method allows KEMET to identify the
breakdown voltage of each individual capacitor and provide only
the strongest capacitors from each lot.
SBDS is currently available on select part types in the T493 and
T497 Series. Please contact KEMET for details on ordering other
part types with these capabilities.
KEMET offers these technologies per the following options:
• F-Tech only
• SBDS only
• Combination of both F-Tech and SBDS for the ultimate protection
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
1
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Benefits
• F-Tech and Simulated Breakdown Voltage (SBDS) screening
options available
• Taped and reeled per EIA 481
• Symmetrical, compliant terminations
• Laser-marked case
• 100% surge current test available on all case sizes
• Termination options B, C, H, K, T, N & M
•
•
•
•
•
•
Weibull failure options B and C
Voltage rating of 4 – 63 VDC
Operating temperature range of -55˚C to +125˚C
Capacitance values of 0.1 μF to 470 μF
All parts tested per Group A of MIL–PRF–55365
Approved for DLA Drawing 07016 applications*
* Defense Logistics Agency (DLA), previously identified as DSCC
Applications
Typical applications include decoupling and filtering in military and aerospace applications.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T
493
D
227
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
T=
Tantalum
Military
COTS
A, B,
C, D,
E, X
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
K
006
Capacitance Rated Voltage
Tolerance
(VDC)
J = ±5%
K = ±10%
M = ±20%
004 = 4
006 = 6.3
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
063 = 63
C
H
61
20
Failure Rate/
Design
Termination Finish
Surge
ESR
C = Hot solder dipped
H = Standard solder
coated (SnPb 5% Pb
minimum)
B = Gold plated
K = Solder fused
T = 100% Tin
N = Non-magnetic
100% Tin (Sn)
M = Non-magnetic
(SnPb)
61 = None
62 = 10 Cycles after
Weibull, 25ºC
63 = 10 cycles after
Weibull, -55ºC and
85ºC after Weibull
64 = 10 cycles
before Weibull,-55°
and +85°C
10 = ESR –
Standard
20 = ESR –
Low
30 = ESR –
Ultra low
A = N/A
B = 0.1%/1,000
hours
C = 0.01%/1,000
hours
For detailed part number offerings, please refer to: Table 1A – COTS, Table 1B – DLA Drawing 07016
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
2
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Ordering Information – DLA Drawing 07016
07016Drawing Number
001
K
B
H
A
Dash Number
Capacitance
Tolerance
Reliability Grade
Termination Finish
Surge
C = Hot solder dipped
H = Standard solder coated
(SnPb 5% Pb minimum)
B = Gold plated
A = + 25ºC after Weibull
B = -55ºC and +85ºC after
Weibull
C = -55ºC and + 85ºC before
Weibull
Z or no option= No test
required
See Part Number
Table
J = ±5%
K = ±10%
M = ±20%
B = 0.1%/1,000 hours
C = 0.01%/1,000 hours
For detailed part number offerings, please refer to: Table 1A – COTS, Table 1B – DLA Drawing 07016
Ordering Information – F-Tech & Simulated Breakdown Screening (SBDS)
T
493
Capacitor
Series
Class
D
226
Case
Size
Capacitance
Code (pF)
T=
Military A, B, First two digits
Tantalum COTS C, D,
represent
E, X
significant
figures. Third
digit specifies
number of
zeros.
K
020
C
Capacitance Rated Voltage Failure Rate/
Tolerance
(VDC)
Design
J = ±5%
K = ±10%
M = ±20%
020 = 20
025 = 25
035 = 35
050 = 50
063 = 63
A = N/A
B=
0.1%/1,000
hours
C=
0.01%/1,000
hours
H
61
20
Termination Finish
Surge
Screening/ESR
C = Hot solder dipped
H = Standard solder
coated (SnPb 5% Pb
minimum)
B = Gold plated K =
Solder fused
K = Solder fused
T = 100% Tin
N = Non-magnetic
100% Tin (Sn)
M = Non-magnetic
(SnPb)
61 = None
62 = 10 Cycles
after Weibull, 25ºC
63 = 10 cycles after
Weibull, -55ºC and
85ºC after Weibull
64 = 10 cycles
before Weibull,-55°
and +85°C
11 = F-Tech +
SBDS *
12 = SBDS
13 = F-Tech *
21 = Low ESR + 11
22= Low ESR + 12
23 = Low ESR + 13
31= Ultra Low ESR
+ 11
32 = Ultra Low ESR
+ 12
33 = Ultra Low ESR
+ 13
* Select "C", "D" and "X" case sizes in 20 V and higher rated voltage
For detailed part number offerings, please refer to: Table 1A – COTS, Table 1B – DLA Drawing 07016
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
-55°C to 125°C
0.1 – 470 μF at 120 Hz/25°C
J Tolerance (5%), K Tolerance (10%), M Tolerance (20%)
4 – 63 V
DF (120 Hz)
Refer to Part Number Electrical Specification Table
ESR (100 kHz)
Refer to Part Number Electrical Specification Table
Leakage Current
≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
3
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
Storage Life
Thermal Shock
Temperature Stability
85°C at rated voltage, 2,000 hours
125°C at 2/3 rated voltage, 2,000 hours
125°C at 0 volts, 2,000 hours
MIL–STD–202, Method 107, Condition B, mounted,
-55°C to 125°C, 1,000 cycles
Extreme temperature exposure at a
succession of continuous steps at +25°C,
-55°C, +25°C, +85°C, +125°C, +25°C
Δ C/C
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Δ C/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Δ C/C
Within ±5% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
+25°C
-55°C
+85°C
+125°C
IL*
±10%
±10%
±15%
DF
IL
IL
1.5 x IL
1.5 x IL
DCL
IL
N/A
10 x IL
12 x IL
Δ C/C
Surge Voltage
Mechanical Shock/Vibration
Within ±10% of initial value
25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Within ±5% of initial value
DF
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
Δ C/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within initial limits
*IL = Initial limit
Certification
MIL–PRF–55365/8
DLA Drawing 07016
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
4
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Electrical Characteristics
ESR vs. Frequency
1000
T493B106/020_IMP
T493E476/035_IMP
T493X226/035_IMP
T493B106/020_ESR
T493E476/035_ESR
T493X226/035_ESR
Impedance, ESR (Ohms)
100
10
1
0.1
0.01
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
Capacitance vs. Frequency
Capacitance (µF)
100
10
T493B106/020
T493E476/035
T493X226/035
1
0.1
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
10,000,000
T2007_T493 • 7/15/2015
5
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Dimensions – Millimeters (Inches)
Metric will govern
CATHODE (-) END VIEW
SIDE VIEW
ANODE (+) END VIEW
BOTTOM VIEW
A
B
W
B
H
X
T
S
G
Termination cutout
at KEMET's option,
either end
S
Case Size
KEMET
F
E
P
R
L
Component
EIA
L
W
F ±0.1
±(.004)
H
S ±0.3
B ±0.15
±(.012) (Ref) ±.006
X (Ref)
P (Ref)
R (Ref)
T (Ref)
A (Min) G (Ref) E (Ref)
0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
0.4 (0.016)
0.4 (0.016) 0.13 (0.005) 0.8 (0.031) 1.1 (.043) 1.3 (.051)
0.5 (0.020)
1.0 (0.039) 0.13 (0.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087)
A
3.2 ±0.2
1.6 ±0.2
1.6 ±0.2
3216–18 (0.126
±0.008) (0.063 ±0.008) (0.063 ±0.008) 1.2 (.047)
B
3.5 ±0.2
2.8 ±0.2
1.9 ±0.2
3528–21 (0.138
±0.008) (0.110 ±0.008) (0.075 ±0.008) 2.2 (.087)
0.8 (.031)
0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
C
6.0 ±0.3
3.2 ±0.3
2.5 ±0.3
6032–28 (0.236
±0.012) (0.126 ±0.012) (0.098 ±0.012) 2.2 (.087)
1.3 (.051)
0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (0.035)
1.0 (0.039) 0.13 (0.005) 2.5(0.098) 2.8 (.110) 2.4 (.094)
D
7.3 ±0.3
4.3 ±0.3
2.8 ±0.3
7343–31 (0.287
±0.012) (0.169 ±0.012) (0.110 ±0.012)
2.4 (.094)
1.3 (.051)
0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (0.035)
1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (.138) 3.5 (.138)
X
7.3 ±0.3
4.3 ±0.3
4.0 ±0.3
7343–43 (0.287
±0.012) (0.169 ±0.012) (0.157 ±0.012) 2.4 (.094)
1.3 (.051)
0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (0.067)
1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (.138) 3.5 (.138)
E
7.3 ±0.3
6.0±0.3
3.6 ±0.2
7360–38 (0.287
±0.012) (0.236 ±0.012) (0.142 ±0.008)
0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
N/A
4.1 (.161)
0.8 (.031)
1.3 (.051)
N/A
0.13 (0.005) 3.8 (0.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or a notch.
Dimensions – Millimeters (Inches) DLA Drawing 07016
SIDE VIEW
END VIEW
L
W
Termination cutout
at KEMET's option,
either end
H
P
BOTTOM VIEW
Solderable
Surfaces
H2
½ H2 Min.
W2
P
Case Size
Component
KEMET
H
H2 Minimum
L
P +/- 0.3
(0.012)
W
W2 +/- 0.1 (0.004)
A
1.6 ±0.2
(0.063 ±0.008)
0.7 (0.028)
3.2 ±0.2
(0.126 ±0.008)
0.8 (0.031)
1.6 ±0.2
(0.063 ±0.008)
1.2 (0.047)
B
1.9 ±0.2
(0.075 ±0.008)
0.7 (0.028)
3.5 ±0.2
(0.138 ±0.008)
0.8 (0.031)
2.8 ±0.2
(0.110 ±0.008)
2.2 (0.087)
C
2.5 ±0.3
(0.098 ±0.012)
1.0 (0.039)
6.0 ±0.3
(0.236 ±0.012)
1.3 (0.051)
3.2 ±0.3
(0.126 ±0.012)
2.2 (0.087)
D
2.8 ±0.3
(0.110 ±0.012)
1.0 (0.039)
7.3 ±0.3
(0.287 ±0.012)
1.3 (0.051)
4.3 ±0.3
(0.169 ±0.012)
2.4 (0.094)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
6
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Table 1A – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
2.2
3.3
4.7
6.8
6.8
10
10
15
15
22
22
22
33
33
33
47
47
68
68
68
100
100
100
100
150
150
220
330
330
1.5
2.2
3.3
4.7
4.7
6.8
6.8
10
10
15
15
15
22
22
22
33
33
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
C/6032-28
A/3216-18
B/3528-21
C/6032-28
B/3528-21
C/6032-28
B/3528-21
C/6032-28
D/7343-31
A/3216-18
B/3528-21
C/6032-28
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
C/6032-28
A/3216-18
B/3528-21
C/6032-28
B/3528-21
C/6032-28
T493A225(1)004(2)(3)(4)(5)
T493A335(1)004(2)(3)(4)(5)
T493A475(1)004(2)(3)(4)(5)
T493A685(1)004(2)(3)(4)(5)
T493B685(1)004(2)(3)(4)(5)
T493A106(1)004(2)(3)(4)(5)
T493B106(1)004(2)(3)(4)(5)
T493A156(1)004(2)(3)(4)(5)
T493B156(1)004(2)(3)(4)(5)
T493A226(1)004(2)(3)(4)(5)
T493B226(1)004(2)(3)(4)(5)
T493C226(1)004(2)(3)(4)(5)
T493A336(1)004(2)(3)(4)(5)
T493B336(1)004(2)(3)(4)(5)
T493C336(1)004(2)(3)(4)(5)
T493B476(1)004(2)(3)(4)(5)
T493C476(1)004(2)(3)(4)(5)
T493B686(1)004(2)(3)(4)(5)
T493C686(1)004(2)(3)(4)(5)
T493D686(1)004(2)(3)(4)(5)
T493A107(1)004(2)(3)(4)(5)
T493B107(1)004(2)(3)(4)(5)
T493C107(1)004(2)(3)(4)(5)
T493D107(1)004(2)(3)(4)(5)
T493C157(1)004(2)(3)(4)(5)
T493D157(1)004(2)(3)(4)(5)
T493D227(1)004(2)(3)(4)(5)
T493D337(1)004(2)(3)(4)(5)
T493X337(1)004(2)(3)(4)(5)
T493A155(1)006(2)(3)(4(5)
T493A225(1)006(2)(3)(4)(5)
T493A335(1)006(2)(3)(4)(5)
T493A475(1)006(2)(3)(4)(5)
T493B475(1)006(2)(3)(4)(5)
T493A685(1)006(2)(3)(4)(5)
T493B685(1)006(2)(3)(4)(5)
T493A106(1)006(2)(3)(4)(5)
T493B106(1)006(2)(3)(4)(5)
T493A156(1)006(2)(3)(4)(5)
T493B156(1)006(2)(3)(4)(5)
T493C156(1)006(2)(3)(4)(5)
T493A226(1)006(2)(3)(4)(5)
T493B226(1)006(2)(3)(4)(5)
T493C226(1)006(2)(3)(4)(5)
T493B336(1)006(2)(3)(4)(5)
T493C336(1)006(2)(3)(4)(5)
VDC at 85ºC
µF
KEMET/EIA
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
Maximum
Operating
Temp
MSL
ºC
Reflow Temp
≤ 260ºC
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Ω at 25ºC
100 kHz
Maximum
ºC
Reflow Temp
≤ 260ºC
Ultra-low
ESR
Maximum
Operating
Temp
MSL
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low
ESR
µA at +25ºC
Maximum/
5 Minutes
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.9
0.9
0.9
1.3
1.3
1.3
1.9
1.9
2.7
2.7
2.7
4
4
4
4
6
6
8.8
13.2
13.2
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.9
0.9
0.9
1.4
1.4
1.4
2.1
2.1
% at +25ºC
120 Hz
Maximum
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
30.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
Ω at 25ºC
100 kHz
Maximum
8.0
8.0
8.0
6.0
5.5
6.0
3.5
4.0
3.5
4.0
3.5
1.8
4.0
3.5
1.8
3.0
1.8
3.5
1.6
0.8
1.4
1.0
1.2
0.8
1.2
0.8
0.9
0.7
0.5
8.0
8.0
8.0
6.0
5.5
6.0
3.5
4.0
3.5
4.0
3.5
1.8
4.0
3.5
1.8
3.0
1.8
Ω at 25ºC
100 kHz
Maximum
6.0
4.0
3.5
3.0
2.0
2.0
1.2
1.5
1.2
1.5
0.6
0.5
3.0
0.5
0.5
0.5
0.5
2.0
0.25
0.2
N/A
0.7
0.2
0.2
0.3
0.15
0.7
0.15
0.2
6.0
6.0
6.0
3.5
3.5
2.0
1.2
2.0
1.0
1.5
0.7
0.6
3.0
0.6
0.5
0.6
0.3
Ω at 25ºC
100 kHz
Maximum
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.50
N/A
N/A
0.25
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(See below for
part options)
µA at +25ºC
Maximum/
5 Minutes
% at +25ºC
120 Hz
Maximum
Ω at 25ºC
100 kHz
Maximum
Ω at 25ºC
100 kHz
Maximum
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull 64 = 10 cycles -55°C +85°C before
Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
7
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Table 1A – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
47
47
47
68
68
68
100
100
100
150
150
220
220
220
330
330
470
1
1.5
2.2
3.3
3.3
4.7
4.7
6.8
6.8
10
10
10
15
15
15
22
22
33
33
33
47
47
68
68
68
100
100
150
150
B/3528-21
C/6032-28
D/7343-31
B/3528-21
C/6032-28
D/7343-31
B/3528-21
C/6032-28
D/7343-31
C/6032-28
D/7343-31
C/6032-28
D/7343-31
X/7343-43
D/7343-31
X/7343-43
X/7343-43
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
C/6032-28
A/3216-18
B/3528-21
C/6032-28
B/3528-21
C/6032-28
B/3528-21
C/6032-28
D/7343-31
C/6032-28
D/7343-31
C/6032-28
D/7343-31
X/7343-43
C/6032-28
D/7343-31
D/7343-31
X/7343-43
T493B476(1)006(2)(3)(4)(5)
T493C476(1)006(2)(3)(4)(5)
T493D476(1)006(2)(3)(4)(5)
T493B686(1)006(2)(3)(4)(5)
T493C686(1)006(2)(3)(4)(5)
T493D686(1)006(2)(3)(4)(5)
T493B107(1)006(2)(3)(4)(5)
T493C107(1)006(2)(3)(4)(5)
T493D107(1)006(2)(3)(4)(5)
T493C157(1)006(2)(3)(4)(5)
T493D157(1)006(2)(3)(4)(5)
T493C227(1)006(2)(3)(4)(5)
T493D227(1)006(2)(3)(4)(5)
T493X227(1)006(2)(3)(4)(5)
T493D337(1)006(2)(3)(4)(5)
T493X337(1)006(2)(3)(4)(5)
T493X477(1)006(2)(3)(4)(5)
T493A105(1)010(2)(3)(4)(5)
T493A155(1)010(2)(3)(4)(5)
T493A225(1)010(2)(3)(4)(5)
T493A335(1)010(2)(3)(4)(5)
T493B335(1)010(2)(3)(4)(5)
T493A475(1)010(2)(3)(4)(5)
T493B475(1)010(2)(3)(4)(5)
T493A685(1)010(2)(3)(4)(5)
T493B685(1)010(2)(3)(4)(5)
T493A106(1)010(2)(3)(4)(5)
T493B106(1)010(2)(3)(4)(5)
T493C106(1)010(2)(3)(4)(5)
T493A156(1)010(2)(3)(4)(5)
T493B156(1)010(2)(3)(4)(5)
T493C156(1)010(2)(3)(4)(5)
T493B226(1)010(2)(3)(4)(5)
T493C226(1)010(2)(3)(4)(5)
T493B336(1)010(2)(3)(4)(5)
T493C336(1)010(2)(3)(4)(5)
T493D336(1)010(2)(3)(4)(5)
T493C476(1)010(2)(3)(4)(5)
T493D476(1)010(2)(3)(4)(5)
T493C686(1)010(2)(3)(4)(5)
T493D686(1)010(2)(3)(4)(5)
T493X686(1)010(2)(3)(4)(5)
T493C107(1)010(2)(3)(4)(5)
T493D107(1)010(2)(3)(4)(5)
T493D157(1)010(2)(3)(4)(5)
T493X157(1)010(2)(3)(4)(5)
VDC at 85ºC
µF
KEMET/EIA
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
Maximum
Operating
Temp
MSL
ºC
Reflow Temp
≤ 260ºC
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Ω at 25ºC
100 kHz
Maximum
ºC
Reflow Temp
≤ 260ºC
Ultra-low
ESR
Maximum
Operating
Temp
MSL
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low
ESR
µA at +25ºC
Maximum/
5 Minutes
3.0
3.0
3.0
4.3
4.3
4.3
6.3
6.3
6.3
9.5
9.5
13.9
13.9
13.9
20.8
20.8
29.6
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.7
0.7
1
1
1
1.5
1.5
1.5
2.2
2.2
3.3
3.3
3.3
4.7
4.7
6.8
6.8
6.8
10
10
15
15
% at +25ºC
120 Hz
Maximum
6.0
6.0
6.0
8.0
6.0
6.0
15.0
8.0
8.0
8.0
8.0
10.0
8.0
8.0
8.0
8.0
10.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
8.0
8.0
8.0
8.0
Ω at 25ºC
100 kHz
Maximum
3.5
1.6
0.8
1.0
1.2
0.8
10.0
1.2
0.8
1.2
0.7
1.2
0.7
0.7
0.5
0.5
0.2
10.0
8.0
8.0
6.0
5.5
6.0
3.5
6.0
3.5
4.0
3.5
1.8
6.0
3.5
1.8
3.0
1.8
3.5
1.6
0.8
1.2
0.8
1.2
0.8
0.5
1.2
0.7
0.7
0.7
Ω at 25ºC
100 kHz
Maximum
2.0
0.25
0.22
0.65
0.2
0.2
8.0
0.3
0.15
0.3
0.15
0.3
0.1
0.15
0.15
0.1
0.1
6.0
6.0
6.0
4.0
3.5
3.0
1.5
3.0
1.2
1.8
0.8
0.6
4.0
0.7
0.5
0.7
0.4
2.0
0.3
0.3
0.3
0.2
0.3
0.2
0.15
0.3
0.1
0.1
0.2
Ω at 25ºC
100 kHz
Maximum
N/A
N/A
N/A
N/A
N/A
0.18
0.70
0.15
N/A
0.20
N/A
0.23
0.10
0.07
0.10
0.07
0.05
N/A
N/A
N/A
N/A
N/A
N/A
1.3
N/A
0.90
N/A
0.75
N/A
3.2
N/A
0.48
N/A
0.29
N/A
N/A
N/A
N/A
0.08
0.23
0.09
N/A
N/A
0.08
0.08
0.09
(See below for
part options)
µA at +25ºC
Maximum/
5 Minutes
% at +25ºC
120 Hz
Maximum
Ω at 25ºC
100 kHz
Maximum
Ω at 25ºC
100 kHz
Maximum
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull 64 = 10 cycles -55°C +85°C before
Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
8
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Table 1A – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
10
10
10
10
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
20
220
220
330
470
0.68
1
1.5
2.2
3.3
3.3
4.7
4.7
6.8
6.8
6.8
10
10
10
15
15
22
22
22
33
33
47
47
68
100
100
150
150
220
0.47
0.68
1
1.5
1.5
2.2
2.2
3.3
3.3
4.7
4.7
4.7
6.8
D/7343-31
X/7343-43
X/7343-43
X/7343-43
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
C/6032-28
A/3216-18
B/3528-21
C/6032-28
B/3528-21
C/6032-28
B/3528-21
C/6032-28
D/7343-31
C/6032-28
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
D/7343-31
X/7343-43
X/7343-43
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
C/6032-28
B/3528-21
T493D227(1)010(2)(3)(4)(5)
T493X227(1)010(2)(3)(4)(5)
T493X337(1)010(2)(3)(4)(5)
T493X477(1)010(2)(3)(4)(5)
T493A684(1)016(2)(3)(4)(5)
T493A105(1)016(2)(3)(4)(5)
T493A155(1)016(2)(3)(4)(5)
T493A225(1)016(2)(3)(4)(5)
T493A335(1)016(2)(3)(4)(5)
T493B335(1)016(2)(3)(4)(5)
T493A475(1)016(2)(3)(4)(5)
T493B475(1)016(2)(3)(4)(5)
T493A685(1)016(2)(3)(4)(5)
T493B685(1)016(2)(3)(4)(5)
T493C685(1)016(2)(3)(4)(5)
T493A106(1)016(2)(3)(4)(5)
T493B106(1)016(2)(3)(4)(5)
T493C106(1)016(2)(3)(4)(5)
T493B156(1)016(2)(3)(4)(5)
T493C156(1)016(2)(3)(4)(5)
T493B226(1)016(2)(3)(4)(5)
T493C226(1)016(2)(3)(4)(5)
T493D226(1)016(2)(3)(4)(5)
T493C336(1)016(2)(3)(4)(5)
T493D336(1)016(2)(3)(4)(5)
T493C476(1)016(2)(3)(4)(5)
T493D476(1)016(2)(3)(4)(5)
T493D686(1)016(2)(3)(4)(5)
T493D107(1)016(2)(3)(4)(5)
T493X107(1)016(2)(3)(4)(5)
T493D157(1)016(2)(3)(4)(5)
T493X157(1)016(2)(3)(4)(5)
T493X227(1)016(2)(3)(4)(5)
T493A474(1)020(2)(3)(4)(5)
T493A684(1)020(2)(3)(4)(5)
T493A105(1)020(2)(3)(4)(5)
T493A155(1)020(2)(3)(4)(5)
T493B155(1)020(2)(3)(4)(5)
T493A225(1)020(2)(3)(4)(5)
T493B225(1)020(2)(3)(4)(5)
T493A335(1)020(2)(3)(4)(5)
T493B335(1)020(2)(3)(4)(5)
T493A475(1)020(2)(3)(4)(5)
T493B475(1)020(2)(3)(4)(5)
T493C475(1)020(2)(3)(4)(5)
T493B685(1)020(2)(3)(4)(5)
VDC at 85ºC
µF
KEMET/EIA
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
Maximum
Operating
Temp
MSL
ºC
Reflow Temp
≤ 260ºC
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Ω at 25ºC
100 kHz
Maximum
ºC
Reflow Temp
≤ 260ºC
Ultra-low
ESR
Maximum
Operating
Temp
MSL
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low
ESR
µA at +25ºC
Maximum/
5 Minutes
22
22
33
47
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
1.1
1.1
1.1
1.6
1.6
1.6
2.4
2.4
3.5
3.5
3.5
5.3
5.3
7.5
7.5
10.9
16
16
24
24
35.2
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.7
0.7
0.9
0.9
0.9
1.4
% at +25ºC
120 Hz
Maximum
8.0
8.0
10.0
10.0
6.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
12.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6.0
6.0
6.0
Ω at 25ºC
100 kHz
Maximum
0.5
0.5
0.5
0.2
12.0
10.0
8.0
6.0
6.0
3.5
6.0
3.5
7.0
3.5
1.9
3.0
3.5
1.8
3.0
1.8
2.2
1.6
0.8
1.2
0.8
1.2
0.8
0.7
0.7
0.7
0.7
0.5
0.5
14.0
12.0
10.0
8.0
6.0
7.0
3.5
7.0
3.5
6.0
3.5
2.4
3.5
Ω at 25ºC
100 kHz
Maximum
0.2
0.1
0.1
0.05
8.0
6.0
6.0
4.0
3.5
2.0
3.0
1.5
3.0
1.2
0.8
N/A
0.8
0.6
0.8
0.4
0.8
0.4
0.3
0.3
0.25
0.5
0.2
0.2
0.125
0.1
0.4
0.2
0.2
9.0
8.0
5.5
4.5
4.0
4.0
1.5
4.0
1.3
1.8
1.0
0.6
1.0
Ω at 25ºC
100 kHz
Maximum
0.08
0.05
0.05
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.75
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.23
0.15
0.35
0.10
0.15
0.10
0.08
0.15
0.10
0.10
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(See below for
part options)
µA at +25ºC
Maximum/
5 Minutes
% at +25ºC
120 Hz
Maximum
Ω at 25ºC
100 kHz
Maximum
Ω at 25ºC
100 kHz
Maximum
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull 64 = 10 cycles -55°C +85°C before
Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
9
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Table 1A – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
35
6.8
10
10
15
15
22
22
33
47
47
68
68
0.33
0.47
0.68
0.68
1
1
1.5
1.5
2.2
2.2
2.2
3.3
3.3
4.7
4.7
4.7
6.8
6.8
6.8
10
10
15
15
15
22
22
22
33
33
47
47
68
68
0.1
C/6032-28
B/3528-21
C/6032-28
C/6032-28
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
D/7343-31
X/7343-43
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
C/6032-28
B/3528-21
C/6032-28
A/3216-18
B/3528-21
C/6032-28
B/3528-21
C/6032-28
D/7343-31
C/6032-28
D/7343-31
C/6032-28
D/7343-31
X/7343-43
C/6032-28
D/7343-31
X/7343-43
D/7343-31
X/7343-43
D/7343-31
X/7343-43
X/7343-43
E/7360-38
A/3216-18
T493C685(1)020(2)(3)(4)(5)
T493B106(1)020(2)(3)(4)(5)
T493C106(1)020(2)(3)(4)(5)
T493C156(1)020(2)(3)(4)(5)
T493D156(1)020(2)(3)(4)(5)
T493C226(1)020(2)(3)(4)(5)
T493D226(1)020(2)(3)(4)(5)
T493D336(1)020(2)(3)(4)(5)
T493D476(1)020(2)(3)(4)(5)
T493X476(1)020(2)(3)(4)(5)
T493D686(1)020(2)(3)(4)(5)
T493X686(1)020(2)(3)(4)(5)
T493A334(1)025(2)(3)(4)(5)
T493A474(1)025(2)(3)(4)(5)
T493A684(1)025(2)(3)(4)(5)
T493B684(1)025(2)(3)(4)(5)
T493A105(1)025(2)(3)(4)(5)
T493B105(1)025(2)(3)(4)(5)
T493A155(1)025(2)(3)(4)(5)
T493B155(1)025(2)(3)(4)(5)
T493A225(1)025(2)(3)(4)(5)
T493B225(1)025(2)(3)(4)(5)
T493C225(1)025(2)(3)(4)(5)
T493B335(1)025(2)(3)(4)(5)
T493C335(1)025(2)(3)(4)(5)
T493A475(1)025(2)(3)(4)(5)
T493B475(1)025(2)(3)(4)(5)
T493C475(1)025(2)(3)(4)(5)
T493B685(1)025(2)(3)(4)(5)
T493C685(1)025(2)(3)(4)(5)
T493D685(1)025(2)(3)(4)(5)
T493C106(1)025(2)(3)(4)(5)
T493D106(1)025(2)(3)(4)(5)
T493C156(1)025(2)(3)(4)(5)
T493D156(1)025(2)(3)(4)(5)
T493X156(1)025(2)(3)(4)(5)
T493C226(1)025(2)(3)(4)(5)
T493D226(1)025(2)(3)(4)(5)
T493X226(1)025(2)(3)(4)(5)
T493D336(1)025(2)(3)(4)(5)
T493X336(1)025(2)(3)(4)(5)
T493D476(1)025(2)(3)(4)(5)
T493X476(1)025(2)(3)(4)(5)
T493X686(1)025(2)(3)(4)(5)
T493E686(1)025(2)(3)(4)(5)
T493A104(1)035(2)(3)(4)(5)
VDC at 85ºC
µF
KEMET/EIA
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
Maximum
Operating
Temp
MSL
ºC
Reflow Temp
≤ 260ºC
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Ω at 25ºC
100 kHz
Maximum
ºC
Reflow Temp
≤ 260ºC
Ultra-low
ESR
Maximum
Operating
Temp
MSL
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low
ESR
µA at +25ºC
Maximum/
5 Minutes
1.4
2
2
3
3
4.4
4.4
6.6
9.4
9.4
13.6
13.6
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.8
0.8
1.2
1.2
1.2
1.7
1.7
1.7
2.5
2.5
3.8
3.8
3.8
5.5
5.5
5.5
8.3
8.3
11.8
11.8
17
17
0.5
% at +25ºC
120 Hz
Maximum
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
8.0
6.0
4.0
4.0
4.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
6.0
6.0
10.0
6.0
8.0
8.0
4.0
Ω at 25ºC
100 kHz
Maximum
1.9
3.0
1.8
1.7
1.0
1.2
0.8
0.8
0.7
0.7
0.7
0.7
15.0
14.0
10.0
7.5
8.0
5.0
10.0
5.0
7.0
4.5
3.5
3.5
2.5
3.1
1.5
2.4
2.8
1.9
1.4
1.5
1.0
1.5
1.0
0.7
0.4
0.8
0.7
0.7
0.7
0.7
0.7
0.3
0.1
20.0
Ω at 25ºC
100 kHz
Maximum
0.6
1.0
0.5
0.4
0.35
0.4
0.3
0.2
0.2
0.15
0.2
0.15
10.0
9.0
6.0
5.5
4.0
2.0
3.0
1.5
N/A
1.2
2.2
2.0
1.2
N/A
1.0
0.6
0.7
0.6
1.0
0.5
0.4
0.9
0.35
0.2
.275
0.2
0.23
0.4
0.3
0.2
0.3
N/A
N/A
10.0
Ω at 25ºC
100 kHz
Maximum
N/A
N/A
0.48
0.38
0.28
N/A
0.18
0.15
0.10
0.10
0.15
0.12
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.30
N/A
0.75
N/A
N/A
0.58
N/A
0.49
N/A
0.45
N/A
N/A
0.28
N/A
N/A
N/A
N/A
0.09
0.18
0.12
0.15
N/A
N/A
N/A
(See below for
part options)
µA at +25ºC
Maximum/
5 Minutes
% at +25ºC
120 Hz
Maximum
Ω at 25ºC
100 kHz
Maximum
Ω at 25ºC
100 kHz
Maximum
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull 64 = 10 cycles -55°C +85°C before
Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
10
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Table 1A – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
50
0.15
0.22
0.33
0.47
0.47
0.68
0.68
1
1
1.5
1.5
1.5
2.2
2.2
3.3
3.3
4.7
4.7
4.7
6.8
6.8
10
10
10
15
15
15
22
22
33
33
47
47
0.1
0.15
0.15
0.22
0.22
0.33
0.47
0.47
0.68
0.68
1
1
1.5
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
A/3216-18
B/3528-21
C/6032-28
B/3528-21
C/6032-28
B/3528-21
C/6032-28
B/3528-21
C/6032-28
D/7343-31
C/6032-28
D/7343-31
C/6032-28
D/7343-31
X/7343-43
C/6032-28
D/7343-31
X/7343-43
D/7343-31
X/7343-43
D/7343-31
X/7343-43
X/7343-43
E/7360-38
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
B/3528-21
B/3528-21
C/6032-28
A/3216-18
C/6032-28
B/3528-21
C/6032-28
C/6032-28
T493A154(1)035(2)(3)(4)(5)
T493A224(1)035(2)(3)(4)(5)
T493A334(1)035(2)(3)(4)(5)
T493A474(1)035(2)(3)(4)(5)
T493B474(1)035(2)(3)(4)(5)
T493A684(1)035(2)(3)(4)(5)
T493B684(1)035(2)(3)(4)(5)
T493A105(1)035(2)(3)(4)(5)
T493B105(1)035(2)(3)(4)(5)
T493A155(1)035(2)(3)(4)(5)
T493B155(1)035(2)(3)(4)(5)
T493C155(1)035(2)(3)(4)(5)
T493B225(1)035(2)(3)(4)(5)
T493C225(1)035(2)(3)(4)(5)
T493B335(1)035(2)(3)(4)(5)
T493C335(1)035(2)(3)(4)(5)
T493B475(1)035(2)(3)(4)(5)
T493C475(1)035(2)(3)(4)(5)
T493D475(1)035(2)(3)(4)(5)
T493C685(1)035(2)(3)(4)(5)
T493D685(1)035(2)(3)(4)(5)
T493C106(1)035(2)(3)(4)(5)
T493D106(1)035(2)(3)(4)(5)
T493X106(1)035(2)(3)(4)(5)
T493C156(1)035(2)(3)(4)(5)
T493D156(1)035(2)(3)(4)(5)
T493X156(1)035(2)(3)(4)(5)
T493D226(1)035(2)(3)(4)(5)
T493X226(1)035(2)(3)(4)(5)
T493D336M035(2)(3)(4)(5)
T493X336(1)035(2)(3)(4)(5)
T493X476(1)035(2)(3)(4)(5)
T493E476(1)035(2)(3)(4)(5)
T493A104(1)050(2)(3)(4)(5)
T493A154(1)050(2)(3)(4)(5)
T493B154(1)050(2)(3)(4)(5)
T493A224(1)050(2)(3)(4)(5)
T493B224(1)050(2)(3)(4)(5)
T493B334(1)050(2)(3)(4)(5)
T493B474(1)050(2)(3)(4)(5)
T493C474(1)050(2)(3)(4)(5)
T493A684(1)050(2)(3)(4)(5)
T493C684(1)050(2)(3)(4)(5)
T493B105(1)050(2)(3)(4)(5)
T493C105(1)050(2)(3)(4)(5)
T493C155(1)050(2)(3)(4)(5)
VDC at 85ºC
µF
KEMET/EIA
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
Maximum
Operating
Temp
MSL
ºC
Reflow Temp
≤ 260ºC
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Ω at 25ºC
100 kHz
Maximum
ºC
Reflow Temp
≤ 260ºC
Ultra-low
ESR
Maximum
Operating
Temp
MSL
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low
ESR
µA at +25ºC
Maximum/
5 Minutes
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
1.2
1.2
1.6
1.6
1.6
2.4
2.4
3.5
3.5
3.5
5.3
5.3
5.3
7.7
7.7
11.6
11.6
16.5
16.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
% at +25ºC
120 Hz
Maximum
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
10.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
6.0
Ω at 25ºC
100 kHz
Maximum
19.0
18.0
15.0
14.0
8.0
10.0
6.5
10.0
5.0
7.5
5.0
4.5
4.0
3.5
3.5
2.5
1.5
2.5
1.5
2.0
1.3
2.0
1.0
0.9
0.45
0.8
0.9
0.7
0.7
0.3
0.6
0.3
0.5
20.0
19.0
16.0
18.0
14.0
10.0
9.0
8.0
7.9
7.0
7.0
5.5
4.5
Ω at 25ºC
100 kHz
Maximum
6.0
6.0
6.0
4.0
2.5
6.0
2.5
6.0
2.0
N/A
3.0
2.5
2.5
1.5
1.3
0.8
N/A
0.6
0.7
0.9
0.5
1.2
0.3
0.25
N/A
0.3
0.3
0.4
0.3
N/A
0.3
N/A
0.3
10.0
10.0
10.0
N/A
10.0
2.5
2.0
1.8
N/A
1.6
N/A
1.6
1.5
Ω at 25ºC
100 kHz
Maximum
N/A
N/A
N/A
N/A
1.5
N/A
N/A
N/A
1.5
N/A
N/A
N/A
1.5
0.75
N/A
0.60
N/A
0.45
N/A
N/A
0.40
N/A
0.25
0.18
N/A
0.23
0.20
0.20
0.20
N/A
0.18
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.3
N/A
(See below for
part options)
µA at +25ºC
Maximum/
5 Minutes
% at +25ºC
120 Hz
Maximum
Ω at 25ºC
100 kHz
Maximum
Ω at 25ºC
100 kHz
Maximum
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull 64 = 10 cycles -55°C +85°C before
Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
11
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Table 1A – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
50
50
50
50
50
50
50
50
50
50
63
63
1.5
2.2
2.2
3.3
4.7
4.7
6.8
6.8
10
15
6.8
10
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T493D155(1)050(2)(3)(4)(5)
T493C225(1)050(2)(3)(4)(5)
T493D225(1)050(2)(3)(4)(5)
T493D335(1)050(2)(3)(4)(5)
T493D475(1)050(2)(3)(4)(5)
T493X475(1)050(2)(3)(4)(5)
T493D685(1)050(2)(3)(4)(5)
T493X685(1)050(2)(3)(4)(5)
T493X106(1)050(2)(3)(4)(5)
T493X156(1)050(2)(3)(4)(5)
T493X685(1)063(2)(3)(4)(5)
T493X106(1)063(2)(3)(4)(5)
VDC at 85ºC
µF
KEMET/EIA
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
Maximum
Operating
Temp
MSL
ºC
Reflow Temp
≤ 260ºC
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
Ω at 25ºC
100 kHz
Maximum
ºC
Reflow Temp
≤ 260ºC
Ultra-low
ESR
Maximum
Operating
Temp
MSL
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low
ESR
µA at +25ºC
Maximum/
5 Minutes
0.8
1.1
1.1
1.7
2.4
2.4
3.4
3.4
5
7.5
4.3
6.3
% at +25ºC
120 Hz
Maximum
6.0
6.0
6.0
6.0
6.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
Ω at 25ºC
100 kHz
Maximum
3.5
3.5
2.5
2.0
1.5
0.9
0.6
1.0
0.7
1.0
1.0
0.6
Ω at 25ºC
100 kHz
Maximum
1.0
1.5
0.8
0.8
0.6
0.3
0.3
0.5
0.4
N/A
0.6
0.4
Ω at 25ºC
100 kHz
Maximum
N/A
N/A
0.60
0.70
0.28
N/A
N/A
N/A
N/A
N/A
0.3
0.2
(See below for
part options)
µA at +25ºC
Maximum/
5 Minutes
% at +25ºC
120 Hz
Maximum
Ω at 25ºC
100 kHz
Maximum
Ω at 25ºC
100 kHz
Maximum
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull 64 = 10 cycles -55°C +85°C before
Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
12
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Table 1B – DLA Drawing 07016, Ratings & Part Number Reference
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DLA
Drawing 07016
Part Number
DC
Leakage
Maximum
Standard
Operating
ESR
Temp
DF
(See page 2 for
Ordering Information)
07016-001(1)(2)(3)(4)
07016-003(1)(2)(3)(4)
07016-004(1)(2)(3)(4)
07016-006(1)(2)(3)(4)
07016-007(1)(2)(3)(4)
07016-008(1)(2)(3)(4)
07016-009(1)(2)(3)(4)
07016-010(1)(2)(3)(4)
07016-011(1)(2)(3)(4)
07016-012(1)(2)(3)(4)
07016-013(1)(2)(3)(4)
07016-014(1)(2)(3)(4)
07016-015(1)(2)(3)(4)
07016-016(1)(2)(3)(4)
07016-017(1)(2)(3)(4)
07016-019(1)(2)(3)(4)
07016-020(1)(2)(3)(4)
07016-021(1)(2)(3)(4)
07016-022(1)(2)(3)(4)
07016-023M(2)(3)(4)
07016-024M(2)(3)(4)
07016-026(1)(2)(3)(4)
07016-027(1)(2)(3)(4)
07016-028(1)(2)(3)(4)
07016-029(1)(2)(3)(4)
07016-030(1)(2)(3)(4)
07016-032(1)(2)(3)(4)
07016-033(1)(2)(3)(4)
07016-034(1)(2)(3)(4)
07016-035(1)(2)(3)(4)
07016-037(1)(2)(3)(4)
07016-038(1)(2)(3)(4)
07016-039(1)(2)(3)(4)
07016-040(1)(2)(3)(4)
07016-041(1)(2)(3)(4)
07016-042(1)(2)(3)(4)
07016-044(1)(2)(3)(4)
07016-045(1)(2)(3)(4)
07016-049(1)(2)(3)(4)
07016-051(1)(2)(3)(4)
07016-054(1)(2)(3)(4)
07016-055(1)(2)(3)(4)
07016-057M(2)(3)(4)
07016-058M(2)(3)(4)
07016-060(1)(2)(3)(4)
07016-061(1)(2)(3)(4)
07016-062(1)(2)(3)(4)
07016-063(1)(2)(3)(4)
07016-064(1)(2)(3)(4)
07016-065(1)(2)(3)(4)
07016-066(1)(2)(3)(4)
07016-067(1)(2)(3)(4)
07016-068(1)(2)(3)(4)
07016-069(1)(2)(3)(4)
07016-070(1)(2)(3)(4)
µA at +25ºC
Max/5 Min
1.3
4.0
4.0
0.5
0.5
0.5
0.6
0.9
1.4
1.4
2.1
3.0
4.3
4.3
6.3
9.5
13.9
20.8
20.8
29.6
29.6
0.5
0.7
1.0
1.0
1.5
1.5
2.2
2.2
2.2
3.3
3.3
3.3
4.7
4.7
6.8
6.8
10.0
22.0
22.0
33.0
33.0
47.0
47.0
0.5
0.5
0.5
0.8
1.1
1.1
1.6
1.6
2.4
2.4
3.6
% at +25ºC
120 Hz Max
6.0
30.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6.0
6.0
6.0
8.0
8.0
8.0
10.0
10.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6.0
8.0
8.0
8.0
8.0
8.0
10.0
10.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
Ω at+25ºC
100 kHz Max
3.0
1.4
0.9
8.0
6.0
5.0
4.0
3.5
3.0
0.6
0.6
0.3
0.5
0.2
0.15
0.125
0.1
0.1
0.05
0.20
0.05
5.0
4.0
3.0
1.8
3.2
0.6
0.7
0.5
0.3
0.6
0.425
0.5
0.3
0.2
0.3
0.15
0.2
0.15
0.05
0.1
0.05
0.2
0.05
5.5
5.0
3.5
2.0
1.5
1.2
3.0
0.9
0.8
0.5
0.6
MSL
Reflow Temp
≤ 260ºC
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
VDC at 85ºC
µF
KEMET/EIA
4
4
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
16
16
16
16
16
16
16
16
16
16
16
33
100
100
3.3
4.7
6.8
10
15
22
22
33
47
68
68
100
150
220
330
330
470
470
4.7
6.8
10
10
15
15
22
22
22
33
33
33
47
47
68
68
100
220
220
330
330
470
470
2.2
3.3
3.3
4.7
6.8
6.8
10
10
15
15
22
A/3216-18
A/3216-18
B/3528-20
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-20
B/3528-20
C/6032-28
B/3528-20
C/6032-28
C/6032-28
D/7343-31
D/7343-31
X/7343-43
X/7343-44
X/7343-45
X/7343-45
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-20
B/3528-20
B/3528-20
C/6032-28
B/3528-20
B/3528-20
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
C/6032-28
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-44
X/7343-44
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-20
A/3216-18
B/3528-20
B/3528-20
B/3528-20
B/3528-20
(See page 2 for
Ordering Information)
T493A336(1)004(2)(3)(4)20
T493A107(1)004(2)(3)(4)10
T493B107(1)004(2)(3)(4)20
T493A335(1)006(2)(3)(4)10
T493A475(1)006(2)(3)(4)10
T493A685(1)006(2)(3)(4)20
T493A106(1)006(2)(3)(4)10
T493A156(1)006(2)(3)(4)20
T493A226(1)006(2)(3)(4)20
T493B226(1)006(2)(3)(4)20
T493B336(1)006(2)(3)(4)20
T493C476(1)006(2)(3)(4)20
T493B686(1)006(2)(3)(4)10
T493C686(1)006(2)(3)(4)20
T493C107(1)006(2)(3)(4)30
T493D157(1)006(2)(3)(4)10
T493D227(1)006(2)(3)(4)20
T493X337(1)006(2)(3)(4)10
T493X337(1)006(2)(3)(4)20
T493X477M006(2)(3)(4)10
T493X477M006(2)(3)(4)20
T493A475(1)010(2)(3)(4)20
T493A685(1)010(2)(3)(4)20
T493A106(1)010(2)(3)(4)10
T493A106(1)010(2)(3)(4)20
T493A156(1)010(2)(3)(4)30
T493B156(1)010(2)(3)(4)20
T493B226(1)010(2)(3)(4)10
T493B226(1)010(2)(3)(4)20
T493C226(1)010(2)(3)(4)30
T493B336(1)010(2)(3)(4)10
T493B336(1)010(2)(3)(4)20
T493C336(1)010(2)(3)(4)20
T493C476(1)010(2)(3)(4)10
T493C476(1)010(2)(3)(4)20
T493C686(1)010(2)(3)(4)20
T493D686(1)010(2)(3)(4)30
T493C107(1)010(2)(3)(4)10
T493D227(1)010(2)(3)(4)30
T493X227(1)010(2)(3)(4)30
T493X337(1)010(2)(3)(4)20
T493X337(1)010(2)(3)(4)30
T493X477M010(2)(3)(4)10
T493X477M010(2)(3)(4)20
T493A225(1)016(2)(3)(4)30
T493A335(1)016(2)(3)(4)10
T493A335(1)016(2)(3)(4)20
T493A475(1)016(2)(3)(4)10
T493A685(1)016(2)(3)(4)10
T493B685(1)016(2)(3)(4)20
T493A106(1)016(2)(3)(4)10
T493B106(1)016(2)(3)(4)20
T493B156(1)016(2)(3)(4)10
T493B156(1)016(2)(3)(4)20
T493B226(1)016(2)(3)(4)10
VDC at 85ºC
µF
KEMET/EIA
(See page 2 for
Ordering Information)
(See page 2 for
Ordering Information)
µA at +25ºC
Max/5 Min
% at +25ºC
120 Hz Max
Ω at+25ºC
100 kHz Max
ºC
Reflow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DLA
Drawing 07016
Part Number
DC
Leakage
DF
Standard
ESR
Maximum
Operating
Temp
MSL
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
ºC
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
T2007_T493 • 7/15/2015
13
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Table 1B – DLA Drawing 07016, Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DLA
Drawing 07016
Part Number
DC
Leakage
Maximum
Standard
Operating
ESR
Temp
DF
(See page 2 for
Ordering Information)
07016-071(1)(2)(3)(4)
07016-074(1)(2)(3)(4)
07016-076(1)(2)(3)(4)
07016-079(1)(2)(3)(4)
07016-080(1)(2)(3)(4)
07016-082M(1)(2)(3)(4)
07016-083M(1)(2)(3)(4)
07016-084(1)(2)(3)(4)
07016-085(1)(2)(3)(4)
07016-086(1)(2)(3)(4)
07016-087(1)(2)(3)(4)
07016-088(1)(2)(3)(4)
07016-089(1)(2)(3)(4)
07016-090(1)(2)(3)(4)
07016-091(1)(2)(3)(4)
07016-092(1)(2)(3)(4)
07016-093(1)(2)(3)(4)
07016-094(1)(2)(3)(4)
07016-096(1)(2)(3)(4)
07016-098(1)(2)(3)(4)
07016-100(1)(2)(3)(4)
07016-102(1)(2)(3)(4)
07016-104(1)(2)(3)(4)
07016-106(1)(2)(3)(4)
07016-108M(1)(2)(3)(4)
07016-109(1)(2)(3)(4)
07016-110(1)(2)(3)(4)
07016-111(1)(2)(3)(4)
07016-112(1)(2)(3)(4)
07016-113(1)(2)(3)(4)
07016-114(1)(2)(3)(4)
07016-115(1)(2)(3)(4)
07016-118(1)(2)(3)(4)
07016-116(1)(2)(3)(4)
07016-119(1)(2)(3)(4)
07016-120(1)(2)(3)(4)
07016-121(1)(2)(3)(4)
07016-122(1)(2)(3)(4)
07016-123(1)(2)(3)(4)
07016-124(1)(2)(3)(4)
07016-125(1)(2)(3)(4)
07016-127(1)(2)(3)(4)
07016-128(1)(2)(3)(4)
07016-130M(1)(2)(3)(4)
07016-131M(1)(2)(3)(4)
07016-132(1)(2)(3)(4)
07016-133M(1)(2)(3)(4)
07016-134M(1)(2)(3)(4)
07016-135(1)(2)(3)(4)
07016-136(1)(2)(3)(4)
07016-137(1)(2)(3)(4)
07016-138(1)(2)(3)(4)
07016-140(1)(2)(3)(4)
07016-141(1)(2)(3)(4)
07016-142(1)(2)(3)(4)
µA at +25ºC
Max/5 Min
3.5
5.3
7.5
10.9
16.0
24.0
24.0
24.0
35.2
0.5
0.5
0.9
0.9
0.9
1.4
2.0
0.7
2.0
3.0
4.4
6.6
9.4
13.6
13.6
0.5
0.5
0.5
0.5
0.5
0.6
0.8
1.2
1.7
1.2
1.2
1.7
2.5
2.5
5.5
5.5
5.5
8.3
8.3
11.8
11.8
17.0
0.5
0.5
0.5
0.5
0.5
0.8
1.6
1.6
2.4
% at +25ºC
120 Hz Max
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
Ω at+25ºC
100 kHz Max
0.375
0.3
0.35
0.15
0.125
0.15
0.06
0.05
0.05
6.5
3.0
4.0
1.8
1.0
1.0
1.0
0.5
0.7
0.4
0.4
0.2
0.2
0.2
0.2
10.0
8.0
7.5
3.0
7.0
2.0
2.0
3.1
2.8
1.5
0.7
0.7
0.5
0.3
0.4
0.275
0.2
0.3
0.09
0.25
0.175
0.1
12.0
8.0
7.5
7.5
5.2
2.0
1.5
0.45
0.35
MSL
Reflow Temp
≤ 260ºC
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
VDC at 85ºC
µF
KEMET/EIA
16
16
16
16
16
16
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
35
35
35
35
35
35
35
35
35
22
33
47
68
100
150
150
150
220
1.5
2.2
4.7
4.7
4.7
6.8
10
10
10
15
22
33
47
68
68
0.68
1
1.5
1.5
2.2
2.2
3.3
4.7
4.7
4.7
4.7
6.8
10
10
22
22
22
33
33
47
47
68
0.47
0.68
1
1.5
1.5
2.2
4.7
4.7
6.8
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
E/7360-38
E/7360-38
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-20
B/3528-20
B/3528-20
B/3528-20
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-20
B/3528-20
A/3216-18
B/3528-20
B/3528-20
B/3528-20
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
E/7360-38
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-20
B/3528-20
B/3528-20
D/7343-31
C/6032-28
(See page 2 for
Ordering Information)
T493C226(1)016(2)(3)(4)20
T493C336(1)016(2)(3)(4)20
T493C476(1)016(2)(3)(4)30
T493D686(1)016(2)(3)(4)30
T493D107(1)016(2)(3)(4)20
T493D157M016(2)(3)(4)20
T493D157M016(2)(3)(4)30
T493E157(1)016(2)(3)(4)10
T493E227(1)016(2)(3)(4)10
T493A155(1)020(2)(3)(4)20
T493A225(1)020(2)(3)(4)10
T493A475(1)020(2)(3)(4)10
T493A475(1)020(2)(3)(4)20
T493B475(1)020(2)(3)(4)20
T493B685(1)020(2)(3)(4)20
T493B106(1)020(2)(3)(4)10
T493B106(1)020(2)(3)(4)20
T493C106(1)020(2)(3)(4)20
T493C156(1)020(2)(3)(4)20
T493C226(1)020(2)(3)(4)20
T493D336(1)020(2)(3)(4)20
T493D476(1)020(2)(3)(4)20
T493D686(1)020(2)(3)(4)20
T493X686(1)020(2)(3)(4)20
T493A684(1)025(2)(3)(4)10
T493A105(1)025(2)(3)(4)10
T493A155(1)025(2)(3)(4)10
T493A155(1)025(2)(3)(4)20
T493A225(1)025(2)(3)(4)10
T493B225(1)025(2)(3)(4)20
T493B335(1)025(2)(3)(4)20
T493A475(1)025(2)(3)(4)10
T493B475(1)025(2)(3)(4)10
T493B475(1)025(2)(3)(4)20
T493B475(1)025(2)(3)(4)30
T493C685(1)025(2)(3)(4)20
T493C106(1)025(2)(3)(4)10
T493C106(1)025(2)(3)(4)20
T493C226(1)025(2)(3)(4)10
T493C226(1)025(2)(3)(4)20
T493D226(1)025(2)(3)(4)20
T493D336(1)025(2)(3)(4)20
T493D336(1)025(2)(3)(4)30
T493D476(1)025(2)(3)(4)20
T493D476(1)025(2)(3)(4)30
T493E686(1)025(2)(3)(4)10
T493A474(1)035(2)(3)(4)20
T493A684(1)035(2)(3)(4)20
T493A105(1)035(2)(3)(4)20
T493A155(1)035(2)(3)(4)10
T493B155(1)035(2)(3)(4)10
T493B225(1)035(2)(3)(4)30
T493B475(1)035(2)(3)(4)10
T493D475(1)035(2)(3)(4)10
T493C685(1)035(2)(3)(4)10
VDC at 85ºC
µF
KEMET/EIA
(See page 2 for
Ordering Information)
(See page 2 for
Ordering Information)
µA at +25ºC
Max/5 Min
% at +25ºC
120 Hz Max
Ω at+25ºC
100 kHz Max
ºC
Reflow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DLA
Drawing 07016
Part Number
DC
Leakage
DF
Standard
ESR
Maximum
Operating
Temp
MSL
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
ºC
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
T2007_T493 • 7/15/2015
14
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Table 1B – DLA Drawing 07016, Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DLA
Drawing 07016
Part Number
(See page 2 for
Ordering Information)
07016-143(1)(2)(3)(4)
07016-144(1)(2)(3)(4)
07016-146(1)(2)(3)(4)
07016-147(1)(2)(3)(4)
07016-148(1)(2)(3)(4)
07016-149(1)(2)(3)(4)
07016-152M(2)(3)(4)
07016-153M(2)(3)(4)
07016-154M(1)(2)(3)(4)
07016-155M(1)(2)(3)(4)
07016-156M(1)(2)(3)(4)
07016-157M(1)(2)(3)(4)
07016-158M(1)(2)(3)(4)
07016-160(1)(2)(3)(4)
07016-161(1)(2)(3)(4)
07016-163(1)(2)(3)(4)
07016-164(1)(2)(3)(4)
07016-165(1)(2)(3)(4)
07016-166(1)(2)(3)(4)
07016-167(1)(2)(3)(4)
07016-168(1)(2)(3)(4)
07016-169(1)(2)(3)(4)
07016-170(1)(2)(3)(4)
07016-171(1)(2)(3)(4)
VDC at 85ºC
µF
KEMET/EIA
35
35
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
50
6.8
10
15
15
15
22
33
33
33
47
47
0.15
0.22
0.47
0.68
1
1.5
1.5
2.2
3.3
4.7
6.8
6.8
6.8
D/7343-31
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
E/7260-38
A/3216-18
A/3216-18
B/3528-20
A/3216-18
B/3528-20
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
(See page 2 for
Ordering Information)
T493D685(1)035(2)(3)(4)30
T493C106(1)035(2)(3)(4)20
T493C156(1)035(2)(3)(4)10
T493D156(1)035(2)(3)(4)10
T493D156(1)035(2)(3)(4)20
T493D226(1)035(2)(3)(4)20
T493D336M035(2)(3)(4)10
T493D336M035(2)(3)(4)20
T493X336(1)035(2)(3)(4)20
T493X476M035(2)(3)(4)10
T493E476M035(2)(3)(4)10
T493A154(1)050(2)(3)(4)20
T493A224M050(2)(3)(4)10
T493B474(1)050(2)(3)(4)20
T493A684(1)050(2)(3)(4)10
T493B105(1)050(2)(3)(4)10
T493C155(1)050(2)(3)(4)20
T493D155(1)050(2)(3)(4)20
T493D225(1)050(2)(3)(4)20
T493D335(1)050(2)(3)(4)20
T493D475(1)050(2)(3)(4)30
T493D685(1)050(2)(3)(4)10
T493D685(1)050(2)(3)(4)20
T493X685(1)050(2)(3)(4)20
VDC at 85ºC
µF
KEMET/EIA
(See page 2 for
Ordering Information)
(See page 2 for
Ordering Information)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DLA
Drawing 07016
Part Number
Maximum
Standard
Operating
ESR
Temp
DC
Leakage
DF
µA at +25ºC
Max/5 Min
2.4
3.5
5.3
5.3
5.3
7.7
11.6
11.6
11.6
16.5
16.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
1.1
1.7
2.4
3.4
3.4
3.4
µA at +25ºC
Max/5 Min
% at +25ºC
120 Hz Max
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
4.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
% at +25ºC
120 Hz Max
Ω at+25ºC
100 kHz Max
0.4
1.6
0.45
0.3
0.1
0.4
0.3
0.2
0.3
0.25
0.20
15.0
18.0
9.5
7.9
7.0
2.0
1.5
1.2
0.8
0.3
0.6
0.3
0.4
Ω at+25ºC
100 kHz Max
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
DC
Leakage
DF
Standard
ESR
Maximum
Operating
Temp
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
ºC
ºC
MSL
Reflow Temp
≤ 260ºC
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow Temp
≤ 260ºC
MSL
T2007_T493 • 7/15/2015
15
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Recommended Voltage Derating Guidelines
85°C to 125°C
120%
VR
67% of VR
100%
50% of VR
33% of VR
% Working Voltage
% Change in Working DC
Voltage with Temperature
Recommended Maximum
Application Voltage
-55°C to 85°C
80%
60%
40%
20%
0%
% Change in Working DC Voltage
with Temperature
67%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
-55
25
33%
85
Temperature (ºC)
125
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specified for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Ripple Current
T ≤ 25°C
1.00
T ≤ 85°C
0.90
T ≤ 125°C
0.40
KEMET
Case Code
EIA
Case Code
A
B
C
D
X
E
S
T
U
V
T510X
T510E
3216–18
3528–21
6032–28
7343–31
7343–43
7360–38
3216–12
3528–12
6032–15
7343–20
7343–43
7360–38
Maximum Power
Dissipation (P max)
mWatts at 25°C
w/+20°C Rise
75
85
110
150
165
200
60
70
90
125
270
285
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature Compensation
Multiplier table for details.
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
16
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
125°C
15% of Rated voltage
5% of Rated voltage
1% of Rated voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
3528–21
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
7343–31
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
E1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
X1
7343–43
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2
Land pattern geometry is too small for silkscreen outline.
V1
L
L
W
W
V2
S
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
17
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Soldering Process
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profile (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
100°C
150°C
Temperature Maximum (TSmax)
150°C
200°C
Time (ts) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
Ramp-up Rate (TL to TP)
3°C/seconds maximum
3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (tL)
60 – 150 seconds
220°C*
235°C**
60 – 150 seconds
250°C*
260°C**
Peak Temperature (TP)
Time within 5°C of Maximum
Peak Temperature (tP)
Ramp-down Rate (TP to TL)
20 seconds maximum
30 seconds maximum
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature
6 minutes maximum
8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
TL
Temperature
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase reflow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profile
conditions for convection and IR reflow reflect the profile conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
tL
Tsmax
Tsmin
25
tS
25ºC to Peak
Time
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
18
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Construction
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Silver Paint
(Fourth Layer)
Polarity
Bevel (+)
Tantalum Wire
Leadframe
(- Cathode)
Washer
Tantalum Wire
Weld
(to attach wire)
Carbon
(Third Layer)
Silver Adhesive
Leadframe
(+ Anode)
Molded Epoxy
Case
MnO2
(Second Layer)
Washer
Ta2O5 Dielectric
(First Layer)
Tantalum
Capacitor Marking
Date Code *
KEMET
Military
COTS
Polarity
Indicator (+)
1 digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year
01 = 1st week of the Year to
52 = 52nd week of the Year
st
Picofarad
Code
KEMET
ID
Rated
Voltage
Date
Code*
* 230 = 30th week of 2012
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
19
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA
Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible
with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
180 mm (7.0")
or
330 mm (13.0")
Table 3 – Packaging Quantity
Case Code
KEMET
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
X
E/T428P
H
EIA
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
12
12
12
12
12
8
8
12
12
12
12
12
12
12
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
1,000
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
20
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØDo
Po
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E1
Ao
F
Ko
B1
S1
W
E2
Bo
P1
T1
Center Lines of Cavity
B 1 is for tape feeder reference only,
including draft concentric about B o.
Embossment
For cavity size,
see Note 1 Table 4
ØD 1
Cover Tape
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
8 mm
12 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
16 mm
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
B1 Maximum
Note 4
4.35
(0.171)
E1
P0
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
P2
2.0 ±0.05
(0.079 ±0.002)
2.0 ±0.1
(0.079 ±0.059)
R Reference
Note 2
25.0
(0.984)
30
(1.181)
S1 Minimum
T Maximum T1 Maximum
Note 3
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
E2 Minimum
F
8 mm
Single (4 mm)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
12 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
16 mm
Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
P1
2.0 ±0.05 or 4.0 ±0.10
(0.079 ±0.002 or 0.157 ±0.004)
2.0 ±0.05 (0.079 ±0.002) or 4.0
5.5 ±0.05
±0.10 (0.157 ±0.004) or 8.0 ±0.10
(0.217 ±0.002)
(0.315 ±0.004)
7.5±0.10
4.0 ±0.10 (0.157 ±0.004) to 12.0
(0.295 ±0.004)
±0.10 (0.472 ±0.004)
T2 Maximum
W Maximum A0, B0 & K0
2.5
(0.098)
8.3
(0.327)
4.6
(0.181)
12.3
(0.484)
8.0 (0.315)
16.3
(0.642)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
21
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8,12
16 – 200
Bo
Maximum
Rotation (
20
10
°
T)
Typical Component Centerline
Ao
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
16 mm Tape
°
s
Tape
Maximum
Width (mm) Rotation (
8,12
20
16 – 56
10
72 – 200
5
°
S)
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
R
T2007_T493 • 7/15/2015
22
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3 (Includes
Access Hole at
Slot Location
(Ø 40 mm minimum)
flange distortion
at outer edge)
W2 (Measured at hub)
D
A
(See Note)
N
C
(Arbor hole
diameter)
B
(see Note)
W1 (Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
Shall accommodate tape width
without interference
8 mm
12 mm
16 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
23
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
END
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm Minimum
Components
100 mm
Minimum Leader
400 mm Minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
24
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Wyboston, United Kingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
25
Tantalum Surface Mount Capacitors – High Reliability
T493 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR11 Style)
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2007_T493 • 7/15/2015
26