DC-DC Converter DIP-Package DMV-6 SERIES, 6WATT, 2:1 INPUT RANGE FEATURES: 1500Vdc isolation voltage Metal case with low ripple and noise Short circuit and input under voltage protection Operating temperature range -40 3 year warranty ℃ to +85 Output voltage (Vdc) Output current (mA) Efficiency Typ. DMV6-1211M 3.3 1500 75% DMV6-1212M 5 1200 80% DMV6-1213M 12 500 84% 15 400 85% 24 250 88% ±600 ±250 ±200 78% DMV6-1224M ±5 ±12 ±15 DMV6-2411M 3.3 1500 75% DMV6-2412M 5 1200 80% DMV6-2413M 12 500 84% 15 400 85% 24 250 88% ±600 ±250 ±200 78% DMV6-2424M ±5 ±12 ±15 DMV6-2411M 3.3 1500 75% DMV6-2412M 5 1200 80% DMV6-2413M 12 500 84% 15 400 85% 24 250 88% ±5 ±12 ±15 ±600 ±250 ±200 78% Model DMV6-1214M DMV6-1215M Input voltage (Vdc) ℃ 12(9~18) DMV6-1221M DMV6-1223M DMV6-2414M DMV6-2415M 24(18~36) DMV6-2421M DMV6-2423M DMV6-2414M DMV6-2415M DMV6-2421M DMV6-2423M DMV6-2424M 48(36~72) 81% 82% 81% 82% 81% 82% Notes: Other input and output models may available on request. www.pairuigroup.com Page: 1 / 3 Date: 08/01/2014 DC-DC Converter DIP-Package DMV-6 SERIES, 6WATT, 2:1 INPUT RANGE ELECTRICAL Output voltage accuracy --- Line regulation Nominal Load, full voltage Load regulation 20% ~ 100% rated load Dynamic response (transient/recovery time) Vo1≤2% 5%-50%-75% load capability Vo1: ±0.5% max. Vo1: ±1% max. ∆Vo/∆t: ±4.0%/500μs Vo≤5.0V, ≤50mVp-p Ripple and noise 20MHz BM, full load Operating frequency Typical value 330KHz max. Turn-on delay time Typical value ≤200ms Isolation voltage Input to output 1500Vdc (<0.5mA/min) Input to case Temperature coefficient --- ±0.02%/℃ max. Operating temperature range --- -40℃ to +85℃ Storage temperature range --- -55℃ to +125℃ Short circuit protection --- Auto-recovery Input under voltage protection Other, ≤100mVp-p 500Vdc When input voltage is lower than the Auto-recovery low terminal input voltage Relative humidity --- 10%-90% max. MTBF Bellcore TR-332, 25℃ Weight --- 200KHrs 16g Notes: All the parameters are measured at 25℃ ambient temperature, humidity < 75%, nominal input voltage, full load and after warm-up, unless otherwise specified. MECHANICAL CONNECTION PIN # SINGLE DUAL 1 -Vin -Vin 2 +Vin +Vin 3 +Vo +Vo 4 No Pin COM 5 -Vo -Vo Note: Unit is mm(inch). www.pairuigroup.com Page: 2 / 3 Date: 08/01/2014 DC-DC Converter DIP-Package DMV-6 SERIES, 6WATT, 2:1 INPUT RANGE TEMPERATURE PROFILE NOTES RECOMMENDED TEST AND APPLICATION CIRCUIT FUSE: depends on the actual input current; TVS: depends on the actual input voltage; Recommended capacitor: C1,C2,C5,C8, about 0.1uF; C6: 22uF-100uF; C7, C9: 10uF/10mA. www.pairuigroup.com Page: 3 / 3 Date: 08/01/2014