DC-DC Converter DIP-Package DMV-10W SERIES, 10WATT, 4:1 INPUT RANGE FEATURES: 1500Vdc isolation voltage Six-side shielded metal case with low ripple and noise High reliability, high efficiency Operating temperature range -40 3 year warranty Model DMV10W-2411 DMV10W-2412 DMV10W-2413 DMV10W-2414 DMV10W-2415 DMV10W-2421 DMV10W-2422 DMV10W-2423 DMV10W-2424 DMV10W-2425 DMV10W-4811 DMV10W-4812 DMV10W-4813 DMV10W-4814 DMV10W-4815 DMV10W-4821 DMV10W-4822 DMV10W-4823 DMV10W-4824 DMV10W-4825 ℃ to +85℃ Input voltage (Vdc) Output voltage (Vdc) Output current (mA) Efficiency Typ. 5 2000 80% 9 1111 82% 12 833 83% 15 667 83% 24 417 85% ±5 1000 81% 24(9~36) 48(18~72) ±9 555 82% ±12 417 83% ±15 333 84% ±24 208 84% 5 2000 81% 9 1111 82% 12 833 83% 15 667 83% 24 417 84% ±5 1000 81% ±9 555 82% ±12 417 83% ±15 333 84% ±24 208 84% Notes: Other input and output models may available on request. ELECTRICAL Output voltage accuracy --- Line regulation Nominal Load, full voltage Load regulation 5% ~ 100% rated load Switching frequency Rated input voltage Ripple and noise 20MHz BM, full load Isolation voltage (<1mA/min) www.pairuigroup.com ±2% max. Input to output Page: 1 / 3 ±0.5% max. ±1% max. 300KHz typ. 100mVp-p max. 1500Vdc Date: 09/10/2015 * Subject to change without notice DC-DC Converter DIP-Package DMV-10W SERIES, 10WATT, 4:1 INPUT RANGE ELECTRICAL Isolation resistance 500Vdc 1000MΩ Temperature coefficient --- ±0.03%/℃ max. Operating temperature range --- -40℃ to +85℃ Storage temperature range --- -55℃ to +125℃ Short circuit protection --- Continuous auto-recovery Relative humidity --- 5%-95% max. MTBF Bellcore TR-332, 25℃ Weight --- 1000KHrs 15g Notes: All the parameters are measured at 25℃ ambient temperature, humidity < 75%, nominal input voltage, full load and after warm-up, unless otherwise specified. MECHANICAL CONNECTION PIN # SINGLE DUAL 1 GND GND 2 +Vin +Vin 3 +Vo +Vo 4 No Pin 0V 5 0V -Vo Note: * Unit is mm(inch). ELECTRICAL CURVE www.pairuigroup.com Page: 2 / 3 Date: 09/10/2015 * Subject to change without notice DC-DC Converter DIP-Package DMV-10W SERIES, 10WATT, 4:1 INPUT RANGE NOTES RECOMMENDED TEST AND APPLICATION CIRCUIT SINGLE OUTPUT DUAL OUTPUT CAPACITOR SELECTION INPUT VOLTAGE C1 SINGLE OUTPUT C2 24VDC 47μF 5VDC 470μF 48VDC 10μF 9VDC 220μF -- -- 12VDC 100μF -- -- 15VDC 100μF -- -- 24VDC 47μF www.pairuigroup.com Page: 3 / 3 DUAL OUTPUT ±5VDC ±9VDC ±12VDC ±15VDC ±24VDC C2 220μF 100μF 47μF 47μF 22μF Date: 09/10/2015 * Subject to change without notice