DC-DC PCB MOUNTED CONVERTERS & POWER MODULES 150V Maxi Mini Micro 260 7 5 - 5 0 0 W AT T S - D C / D C C O N V E R T E R S FEATURES • • • • • • • • • Input Voltage: 100-200Vdc Output Voltage: 3.3-48Vdc Up to 120 W/in3 Low noise zero-current switching and zerovoltage switching technology Single-wire paralleling Output voltage adjusts from 10-110% Logic enable / disable Input undervoltage lockout Output overvoltage protection SPECIFICATIONS SELECTION TABLES OUTPUT VOLTAGE (VDC) INPUT Voltage range MICRO MINI MAXI 3.3V 75 150 264 Nominal input; 5V 100 200 400 100 200 400 100-200Vdc OUTPUT Set point accuracy OUTPUT POWER (W) ±1%Vout nom Line regulation ±0.02%Vout nom. Low line to high 8V Load regulation ±0.02%Vout nom. No load to full 12V 150 250 500 150 250 500 Temperature regulation ±0.002%Vout/°C -20°C to 100oC 15V Ripple and noise, p-p Remote sense compensation Overvoltage set point 100 mV Full load, 20MHz 24V 150 250 500 28V 150 250 500 36V 150 250 500 48V 150 250 500 Current limit 115% out max. Vout 95% of Efficiency: 5V out 24V out 83% 88% Nominal input; load; 25°C 0.5 Volts 115% Vout nom. 88% Programming range 10-110 % Vout nom. Short circuit current 115% out max. Output Voltage Isolation voltage 3000 Vrms Input to Output (typical unless otherwise noted) STANDARDS AND APPROVALS Safety UL60950-1, CSA60950-1, EN60950-1, IEC 60950-1 PRODUCT GRADE SPECIFICATIONS E C T H M Operating Temp. -10 to 100 -20 to 100 -40 to 100 -40 to 100 -55 to 100 (°C) Storage Temp. (°C) -20 to 125 -40 to 125 -40 to 125 -55 to 125 -65 to 125 Temp. Cycling none none none (°C) 24 hours 24 hours (-55 to 125) (-65 to 125) Burn-In none none none 12 hours 24 hours Low Temp. Test (°C) none none none -40°C -55°C High Temp. Test (°C) none none none 100°C 100°C Final Test Data none none none Refer to mechanical drawings. PART NUMBERING Doc. No. PBC9 Rev.C 28-4-11