LED-CONVERTER UNIT PS-LD0301-031(S) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile LED converter is developed for max. 3 LED-lines Optimized for AUO: G150XG01 V.2 19th Nov. 2008 APPLICABLE: 1~3 LED lines (Serial Mode) Pout max. 7W LED Voltage max. 30Vdc Lamp Current max. 80mAdc FEATURES : Internal Open LED Detection for every Line Voltage or ext. PWM Dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Wide Input Voltage Range RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH -10°C ~ +65°C -20°C ~ +85°C 95 %RH max 64 x 32 x 6.5 mm Weight :8 (g) typ. Components No. 1 2 Part Description PCB Connector CN1 Qty. 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0890 / PBD Note t=1.0mm Molex 3 Connector CN3 1 53261-0690 / PBD Molex Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 2..0.2, 16th May 2014 LED-CONVERTER UNIT PS-LD0301-031(S) (PRELIMINARY INFORMATION) Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 CN 1-7 CN 1-8 Output side CN3: Symbols Ratings Vin 4.75 ~ 13.2 Vdc Vin 4.75 ~ 13.2 Vdc Vrm t 0 ~ 1.5 = OFF / 2.5 ~ Vin = ON Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH Vbr 0.0 ~ 5.0 (5V=low brightnes s ) GND GND GND Pin No. CN 3-1 CN 3-2 CN 3-3 CN 3-4 CN 3-5 Symbols RTN1(-) RTN2(-) RTN3(-) Vhigh(+) Vhigh(+) Ratings LED LINE 1 RETURN LED LINE 2 RETURN LED LINE 3 RETURN 30Vdc (80m Arm s ) 30Vdc (80m Arm s ) CN 3-6 Vhigh(+) 30Vdc (80m Arm s ) - ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Output Current Output Current Input Current Open Load Shutdow n PW M Frequency Output Pow er Output Pow er Output Pow er Output Pow er Iout Im in Iin Vbias f(PWM) Pout Pout Pout Pout Note 1 : Note 2 : Note 3 : Vin (V) 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 Specification Vbr (V) Tu (°C) 0 5 0 0 0 0 0 0 0 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 Min. Typ. Max. TBD TBD 150 TBD TBD TBD TBD 80 10 1.0 28 TBD TBD TBD TBD TBD TBD 300 TBD TBD TBD TBD Unit Note m Adc % Adc Vdc Hz Watt Watt Watt Watt Dut y 100 %, max current d ut y cycle *B y 12V dc Tu: -2 0~+50d egC Tu: -2 0~+70d egC Fo r o ne line Fo r o ne line Do not use analog dimming and external PWM dimming at the same time. Pin Terminal Style converters are mounted with Molex connectors. External PWM-signal is LOW active. TEST CIRCUIT : Connect Vbr to Ground while using ext. PWM dimming. CABLES : For input: For output: 500 mm, stripped and tinned ends, order key < input cable # 13> <Adapter cable 3> with 300mm length or <Adapter cable 6> with 90mm length Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 2..0.2, 16th May 2014