PDL02 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 2 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • UP TO 3000VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE 0.86 X 0.36 X 0.44 INCH • LOW OUTPUT RIPPLE AND NOISE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT ： 3000VDC ISOLATION 1600VDC ISOLATION REMOTE CONTROL OCP SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number PDL02-05S33 PDL02-05S05 PDL02-05S09 PDL02-05S12 PDL02-05S15 PDL02-05D05 PDL02-05D12 PDL02-05D15 PDL02-12S33 PDL02-12S05 PDL02-12S09 PDL02-12S12 PDL02-12S15 PDL02-12D05 PDL02-12D12 PDL02-12D15 PDL02-24S33 PDL02-24S05 PDL02-24S09 PDL02-24S12 PDL02-24S15 PDL02-24D05 PDL02-24D12 PDL02-24D15 PDL02-48S33 PDL02-48S05 PDL02-48S09 PDL02-48S12 PDL02-48S15 PDL02-48D05 PDL02-48D12 PDL02-48D15 1 Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 mA 500 400 222 167 134 ±200 ±83 ±67 500 400 222 167 134 ±200 ±83 ±67 500 400 222 167 134 ±200 ±83 ±67 500 400 222 167 134 ±200 ±83 ±67 mA 35 35 40 40 40 40 40 40 20 20 20 20 20 30 30 30 15 15 15 15 15 15 15 15 8 8 8 8 8 8 8 8 % 76 80 82 81 83 79 82 81 77 81 82 83 84 81 83 84 78 81 82 83 84 80 83 82 76 78 84 83 83 80 81 81 µF 2200 1000 470 170 110 ±470 ±100 ±47 2200 1000 470 170 110 ±470 ±100 ±47 2200 1000 470 170 110 ±470 ±100 ±47 2200 1000 470 170 110 ±470 ±100 ±47 www.PDUKE.com 2014/04/30 PDL02 PART NUMBER STRUCTURE PDL02 - 48 Series Name S Input Voltage (VDC) 05: 4.5~9 12: 9~18 24:18~16 48:36~75 05 Output Voltage (VDC) S:Single 33: 3.3 05: 5 09: 9 12:12 15:15 H Output Quantity D: Dual Isolation Option : Standard type 1600VDC isolation H: 3000VDC isolation 05:± 5 12:±12 15:±15 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up time Constant resistive load Input surge voltage 100 ms, max. Input reflected ripple current With external input capacitors 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Input filter (1) Remote ON/OFF Application circuit DC-DC ON OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Conditions Low Line to High Line at Full Load No Load to Full Load 10% Load to 90% Full Load 2 Max. Unit 5 12 24 48 5 5 9 18 36 75 VDC ms 2 VDC 400 150 mAp-p 380 170 Capacitor type Open or high impedance 3 4 mA 2.5 mA DC-DC OFF Load regulation Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection Typ. 4.5 9 18 36 15 36 50 100 DC-DC ON DC-DC OFF Remote off input current Ctrl pin applied current via 1kΩ Min. Asymmetrical load 25%/100% FL 20MHz bandwidth 25% load step change www.PDUKE.com Min. Single Dual Single Dual Dual Typ. -1.0 -0.2 -1.0 -1.0 -0.5 -0.8 -5.0 Max. Unit +1.0 +0.2 +1.0 +1.0 +0.5 +0.8 +5.0 % % % % % mVp-p -0.02 +0.02 %/ 500 µs Continuous, automatics recovery 50 ℃ 2014/04/30 PDL02 GENERAL SPECIFICATIONS Parameter Conditions Isolation voltage 1 minute Isolation resistance Isolation capacitance 500VDC Switching frequency Safety approvals Full load to minimum load Case material Base material Potting material Weight MTBF Input to Output Min. Standard Type Suffix ”H” MIL-HDBK-217F Conditions Min. Without derating With derating Storage temperature range Thermal shock Vibration Relative humidity EMC SPECIFICATIONS Parameter Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Unit GΩ 200 40 100 Operating ambient temperature Max. VDC Standard Type Suffix ”H” ENVIRONMENTAL SPECIFICATIONS Parameter EMI(2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Typ. 1600 3000 1 Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ±1kV 10 Vr.m.s -40 +85 -55 pF kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic None Silicone (UL94 V-0) 4.8g (0.17oz) 4.903 x 106 hrs Typ. Max. Unit ℃ ℃ +85 +100 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH Level ， Class A Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. It will not damage the device without installing external input capacitors. It’s helpful to reduce input reflected ripple current if external input capacitors are installed. 2. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. 3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE PDL02-24S05 Derating Curve 3 PDL02-24S05 Efficiency vs. Input Voltage www.PDUKE.com PDL02-24S05 Efficiency vs. Output Load 2014/04/30 PDL02 MECHANICAL DRAWING PIN CONNECTION PIN SINGLE DUAL 1 -Vin -Vin 2 +Vin +Vin 3 Ctrl Ctrl 5 NC NC 6 +Vout +Vout 7 -Vout Common 8 NC -Vout *NC pin for standard type model. **No pin for 3kVDC isolation model (suffix “H”). 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 www.PDUKE.com 2014/04/30