Y2X1 Series - C1DE08 - RFE International, Inc.

RoHS
FEATURES
INTRODUCTION
• Non-inductive construction
• Self-healing property (Metalized)
• Flame-retardant plastic case and epoxy resin
(compliant to UL 94V-0)
• High moisture resistance
• Agency recognized
Y2X1 Series are constructed with special
Metalized/Polypropylene film dielectric, copperply
lead, in plastic case and epoxy resin sealed. They are
suitable for Line-By-Pass, antenna coupling, AcrossThe-Line, spark killer circuits EMI filter and switching
power supply applications.
DIMENSIONS (mm)
RECOGNITION
Cap (F)
0.0010
0.0015
0.0022
0.0022
0.0033
0.0033
0.0047
0.0047
0.0056
0.0068
0.0068
0.0082
0.0082
0.01
0.01
0.015
0.022
0.033
0.047
0.047
0.068
0.1
0.15
0.22
Code
102
152
222
222
332
332
472
472
562
682
682
822
822
103
103
153
223
333
473
473
683
104
154
224
W
13
13
13
18
13
18
13
18
18
13
18
13
18
13
18
18
18
18
18
26
26
26
26
26
H
9
9
10
11
10
11
11
11
11
12
11
13
11
14
11
12
13
15
17
16
16.5
18
20
24
T
4
4
5
5
5
5
5
5
5
6
5
7
5
8
5
6
7
9
10
6
7.5
9
11
14
d
0.6
0.6
0.6
0.8
0.6
0.8
0.6
0.8
0.8
0.6
0.8
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
P
10
10
10
15
10
15
10
15
15
10
15
10
15
10
15
15
15
15
15
22.5
22.5
22.5
22.5
22.5
Agency
15
150
E346827
ENEC
No.SE/11048-2A
Monogram
CQC11001060988
SPECIFICATIONS SUMMARY
STRAIGHT LEAD SPACING (P)
10
100
UL/CUL
CQC
Type
Performance
Operating Temperature Range
-40°C ~ + 110°C
Climatic Categary
40/110/56/B
Capacitance Range (25°C)
0.001F ~ 0.22F
Capacitance Tolerance
±5% (J), ±10%(K), ±20%(M)
Rated Voltage
310VAC
Dissipation Factor at 20 °C
and 1KHz
0.10% max
Insulation resistance
100,000 MΩ or more (25°C)
dv/dt (v/secat 438 Vdc
800, Ls=10mm
600, Ls=15mm
500, Ls=22.5mm
PART NUMBER EXAMPLE
Y2X1 472 M 300VAC 100 B 200 S
* Leadspace is straight lead non-formed original leadspace.
mm
Code
File number
22.5
225
LEAD LENGTH FROM SEATING PLANE
mm
Code
10
100
10
100
15
150
Lead space*
* Leadspace is straight lead non-formed original leadspace.
± 0.2
± 0.2
LEAD STYLE
CODE
S
K
F
I
STYLE
Straight
Kink-In (Stand off)
± 0.2
Form out**
Form in**
** For Bulk packaging with formed leads,
add an additional 3 digit lead spacing code
at end of part number.
Page 1 of 3
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected]
C1DE08
2015.03.09
RoHS
TYPE: Y2/X1
METALLIZED POLYPROPYLENE CAPACITOR
PRODUCT SPECIFICATION
Metallized polypropylene dielectric fixed capacitor is approved by UL&CUL, ENEC,
and CQC.Related documents: IEC60384-14, EN132400, UL1414
CSA C22.2 No.1, GB/T14472 (1998)
Typical applications:interference suppression and <<across-the-line>> applications
1. Scope
Operating temperature range. -40 to + 100°C (IEC60384-14)
+ 110°C max. ( UL&CUL )
(including temperature rise on unit surface)
2. Product
Range
Rated voltage
300VAC max. (IEC60384-14)
310VAC max.(UL&CUL )
1000VDC max.
Capacitance
Measured @ 1.0 ± 0.2 KHz @25°C , 1 Vrms
3.Apperance
1. Marking shall be legible.
2. Plated lead-wire, no rust.
3. Coating shall be without crack, pinhole.
4.Construction
Non-inductive construction, wound with Metallized polypropylene film dielectric.
Noncombustible plastic case
(Flame class : UL94V-0)
Noncombustible Epoxy resin (RoHS)
(Flame class : UL94V-0)
Metallized polypropylene film
Metallic spray:
Zinc / Tin Wire
( Lead Free )
Tinned copper clad-steel wire
5. Conditional
Stardard Test
The test temperature of from 15°C to 35°C , RH45 to 75%.
CHARACTERISTICS
NO.
Item
1. Tensile
Termination
Strength
2.
Performance
Termination
Bending
Strength
• Straight lead pull gradually for 10 ± 1 second
• No broken or 100se terminations shall be found
IEC 60384-14-4.3
(IEC 60384-1-4.13)
• Lead wire to be bent 90°C in opposing directions, one time
IEC 6038-14-4.4.3
(IEC 6038-1-4.13)
• No broken or loose terminations shall be found
• 10Hz to 55Hz, amplitude 1.5mm, 1 minute test cycle
• Test duration 2 hours, 3 mutually perpendicular directions
• Electrical, Visual inspection during last 30 min in each direction
• No opens or shorts, no mecharical damage
3.
Vibration
Test
4.
Solderability • Solder dip at 235 ± 5°C for 2 ± 0.5 sec, Depth 1.5+0.5mm
from botton of cap body
• 95% tinning
5.
Soldering
Heat
Resistance
• Solder dip up to 1.5 +0.5mm from terminal root using heat
shielding solder temp 350°C ± 10°C for 3.5 ± 0.5 sec,
or 260 ± 5°C for 10 ± 1sec, Cool down to room temp 1 ± 5 hours
• ΔC/C ≤ ± 3% of starting value
IEC 60384-14-4.7
(IEC 60384-1-4.17)
IEC 6008-2-6
Test Fc
IEC 60384-14-4.5
(IEC 60384-1-4.15)
IEC 60068-2-20 Test Ta
IEC 60384-14-4.4
(IEC 60384-1-4.14)
IEC 60068-2-20
Test Tb
Page 2 of 3
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected]
C1DE08
2015.03.09
RoHS
CHARACTERISTICS
NO.
Item
6.
Cold
Resistance
• Test box - 40 ± 3% for 2 hours. Room Temp 1.5 ± 0.5 hours
• ΔC/C ≤ ± 5% of starting value
7.
Dry
Heat
Resistance
• Test box +110 ± 2°C for 2 hours, RoomTemp 1.5 ± 0.5 hours
• IR ≥ 50% of starting vaule
• ΔC/C ≤ ± 5% of starting value
8.
Humidity
Resistance
• 90-95° RH at +40 ± 2°C for 56 days
• Room Temp/RH for 1.5 ± 0.5 hours
• No failure with 1500Vac applied for 1 min
• IR ≥ 50% of specified value
• ΔC/C ≤ ± 5% of specified value
• DF ≤ 0.15% @ 1KHz
9.
Impulse
Voltage
• 24 Impulses of 5KVDC
• No perminent breakdoun or flashover
• After impulse test capacitor is to be exposed to high temp loading
IEC 60384-14-4.13
High
Temp
Loading
• 1000 hour @ 110°C @ 170% of rated voltage, ea hour cycle voltage to
1000 Vrms for 0.1 sec
• No failures when 1500 Vac for 1 min-Terminal to Terminal
• No failures when 1500 Vac for 1 min-Terminal to Enclosure
• IR ≥ 50% spec, between terminals
• DF ≤ 0.15% @ 1KHz
IEC 60384-14-4.14
10.
Performance
IEC 60384-14-11.4
IEC 60068-2-1
Test A a
IEC 60384-14-4.11.2
(IEC 60384-1-4.21.2
IEC 60068-2-2
Test Ba
IEC 60384-14-4.12
(IEC 60384-1-4.22
IEC 60068-2-3
Test Ca
UL/CSA
1.
Across-the
-line
discharge
test
• Apply 240VAC 60Hz to capacitor, and pulse 5K VDC from Dump capacitor 4
times with 5 sec interval between discharges, maintain 240 VAC for 30 sec
after Last pulse
• No glowing, flame, or expulsion of material from the capacitor
Capacitor Under test (Ct) Dump capacitor (Vdc)
0.001~0 .005 μF
0.0051~0 .05 μF
0.051~0 .5 μF
0.51~1 .0 μF
2.
3.
0.005 μF
0.05 μF
0.5 μF
1.0 μF
Applied voltage (Vdc)
5000*(Cd+Ct)
Cd
Line-by-pass
Discharge
Test
• 10K Vdc pulse from 0.001μF Capacitor, 5 second interval between pulses
Damp Heat
Insulation
• 93 ± 2 % RH for 48 hours. 20 to 30°C
• IR=2MΩ or more @ 250VDC
4. Flame test
UL1414.13
CSA C22.2 NO.1
10.5.1
• No abnormal condition terminal-terminal or terminal to case when 1,000VAC
UL1414.16
CSA C22.2 NO.1
6.12.2
applied for 1 minute
• Apply flame for 15 sec, remove, capacitor no flame after 15 seconds repeat 3
times, no flame after 60 seconds
• See UL test procedure for more detail
UL1283.29
UL1414.9
Page 3 of 3
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected]
C1DE08
2015.03.09