Bulletin 1492-CB Manual Motor Controller and Supplementary Protector/Miniature Circuit Breaker 19 Accessories Auxiliary Contacts Description Approvals Diagrams Cat. No. Ser. Auxiliary Contact Module • Switches when protective device is operated manually or tripped electrically • 1 N.O. Contact 1492-ACBH1 B Auxiliary Contact Module • Switches when protective device is operated manually or tripped electrically • 1 N.C. Contact 1492-ACBH2 B Signal Alarm Contact Module • Switches when protective device Is operated manually or tripped electrically • 1 N.O. Contact 1492-ACBS1 B Signal Alarm Contact Module • Switches when protective device Is operated manually or tripped electrically • 1 N.C. Contact 1492-ACBS2 B 98 Note: Series B device mounted accessories work with Series B and Series C devices. Publication 1492-TD011A-EN-P - March 2002 20 Bulletin 1492-CB Manual Motor Controller and Supplementary Protector/Miniature Circuit Breaker Accessories, Continued Voltage Trips Description Approvals Voltages Shunt Trip Module • Use the Shunt Trip Module to trip the adjacent breaker poles from a remote location. The module is actuated by applying a voltage (Pickup Voltage) to the trip terminals. • Shunt Trip Modules are often used in emergency shutdown circuits where multiple power circuits must be switched off from a single location. 5…12V AC/DC 10…24V AC/DC 20…48V AC/DC 40…110V AC/DC 90…240V AC/DC Diagrams Cat. No. 1492-ACBA1 1492-ACBA2 1492-ACBA3 1492-ACBA4 1492-ACBA5 Note: Series B device mounted accessories work with Series B and Series C devices. Allowable combinations of field added modules ➊ added to 1p, 1p+N, 2p, 3p device: (1) N.O. Auxiliary Contact Module (1) N.C. Auxiliary Contact Module (1) N.O. Signal Alarm Contact Module (1) N.C. Signal Alarm Contact Module (1) Shunt Trip Module (2) N.O. Auxiliary Contact Modules (2) N.C. Auxiliary Contact Modules (2) N.O. Signal Alarm Contact Modules (2) N.C. Signal Alarm Contact Modules (1) N.O. Auxiliary Contact Module + (1) N.C. Auxiliary Contact Module (1) N.O. Auxiliary Contact Module + (1) N.O. Signal Alarm Module (1) N.O. Auxiliary Contact Module + (1) N.C. Signal Alarm Module (1) N.C. Auxiliary Contact Module + (1) N.O. Signal Alarm Module (1) N.C. Auxiliary Contact Module + (1) N.C. Signal Alarm Module (1) Shunt Trip Module + (1) N.O. Auxiliary Contact Module (1) Shunt Trip Module + (1) N.C. Auxiliary Contact Module (1) Shunt Trip Module + (1) N.O. Signal Alarm Contact Module (1) Shunt Trip Module + (1) N.C. Signal Alarm Contact Module Allowable combinations of field added modules ➊ added to 3p+N device (1) (1) (1) (1) (1) N.O. Auxiliary Contact Module N.C. Auxiliary Contact Module N.O. Signal Alarm Contact Module N.C. Signal Alarm Contact Module Shunt Trip Module ➊ All modules are added to left side of device. Publication 1492-TD011A-EN-P - March 2002 Ser. B B B B B Bulletin 1492-CB Manual Motor Controller and Supplementary Protector/Miniature Circuit Breaker Accessories, Continued 21 Accessories used with all 1492-CB Miniature Circuit Breakers Accessories Mounting Rails 1 m Symmetrical DIN 1 m Hi-Rise Symmetrical DIN 1 m Angled Hi-Rise Symmetrical DIN End Anchor Lockout Attachment ➊ Pin Style Commoning Link One-Pole — one meter, 40 A (56 devices /m) Two-Pole — one meter, 30 A (29 devices /m) Three-Pole — one meter, 30 A (19 devices /m) Bus Bar End Cap for Two or Three Pole Devices Front Panel Mounting Brackets One-Pole Two-Pole Three-Pole Four-Pole Five-Pole Connecting Clip Opening Seal Cat. No. Pieces/Package 199-DR1 1492-DR6 1492-DR7 1492-EAH35 1492-ACBLOA — 1492-ACBCL1 1492-ACBCL2 1492-ACBCL3 1492-ACBEC1 10 2 2 50 5 — 1 1 1 10 1492-N711 1492-N712 1492-N713 1492-N714 1492-N715 1492-ACBCC1 1492-ACBHS1 5 5 5 5 5 10 10 ➊ When using Bulletin 1492-CB manual motor controller as a motor disconnect, the lockout attachment is required. Publication 1492-TD011A-EN-P - March 2002