F E D C B A 12,85 `0,3 (5:1) D 6,35 `0,2 D 69,5 +- 0,2 0,56 63,5 `0,13 6,13 +- 0,17 0,08 12,4 +- 0,53 0,23 0,8 54,94 +- 0,02 0,23 8 +- 0,02 0,23 10° Ø3,18 (8x) C 6,8 C 8F8SSA28S51A40X CONEC ABC M3 SEE NOTE 11 11,2 `0,3 57,6 `0,3 B B NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 260°C FOR 5 SEC. AND SOLDER PREHEAT 120°C FOR 120 SEC.) 2. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0, BLACK 4. HIGH POWER CONTACTS 30A: COPPER ALLOY PLATING, MATING AREA: GOLD FLASH over NICKEL PLATING, TERMINATION SIDE: 160-240µin TIN over 80µin NICKEL 5. THREADED REAR SPACERS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. SLEEVES: COPPER ALLOY; min. 200µin NICKEL 7. CAPACITANCE: 100 nF `20% 8. DIELECTRIC WITHSTANDING VOLTAGE: 707 VDC 9. P.C.B. HOLE DRILLINGS SEE SHEET 2 10. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 11. CONNECTOR IS PART MARKED: 8F8SSA28S51A40X CONEC ABC scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date drawn 17.07.13 Henneboel D-SUB FILTER COMB. FEMALE appd. 19.07.13 Fischer 8W8SS SOLDER PIN STRAIGHT with threaded rear spacer dwg no: DINA3 24K1A1456 sh: 1/2 norm d-old R a Original rev. description D date A title: name part no: name C B 8F8SSA28S51A40X A F E D C B A P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) D D 63,5 `0,13 22,86 `0,1 16,51 `0,1 10,16 `0,1 3,81 `0,1 C C A1 Ø3,1 `0,1 (2x) 2,54 `0,1 Ø3,6 `0,1 (8x) 8,89 `0,1 15,24 `0,1 22,86 `0,1 A F E DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH B B scale: material: tolerance 3:1 see sheet 1 dim. in mm date A title: name drawn 17.07.13 Henneboel P.C.B. HOLE DRILLINGS appd. 19.07.13 Fischer D-SUB COMBINATION FEMALE 8W8S with threaded rear spacer dwg no: DIN- norm d-old Original rev. description D date part no: name C A3 24K1A1456 R a B sh: 2/2 SEE SHEET 1 A