Ku-Band 30 W Ku-band GaN BUC CPI-Built RF Brick Inside With CPI-built RF brick inside and plenty of thermal margin, this SSPA is rock-solid and easy to maintain. High Linearity Excellent AM/PM, phase noise and spectral regrowth performance. Simple to Operate User-friendly microprocessor-controlled logic with serial interface. Also contains digitally controlled attenuator. Model B2UO 30 watt Ku-band GaAs BUC for satellite uplink applications Extended Band Operation Provides 20 watts of P1dB output power at the flange over the 13.75 to 14.50 GHz frequency range. Global Applications OPTIONS •Higher Gain •Custom Platforms •Ethernet Interface Perfect for Satcom on the Move, micro flyaway systems, VSATs, and antenna-mount applications. Meets Electromagnetic Compatibility Directive 2004/108/EC to satisfy worldwide requirements and is CE-marked. Worldwide Support Backed by over 35 years of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes more than 20 regional factory service centers. 811 Hansen Way, PO Box 51625 Palo Alto, CA 94303 USA tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail:[email protected] website:www.cpii.com/satcom Ku-Band Specifications 30 W Ku-band GaN BUC Specification Model B2UO Frequency 14.00 to 14.50 GHz or 13.75 to 14.50 GHz L-Band Input 950 to 1450 MHz or 950 to 1700 MHz Output Power (min.) 30 W (44.8 dBm) nominal Psat; 20 W (43.0 dBm) p1dB Local Oscillator Frequency Select 13050 or 12800 MHz at purchase External 10 MHz reference 2 dBm ±5 dB Phase Noise, max. (for ext. ref.) -140 dBc/Hz at 100 Hz -150 dBc/Hz at 1 kHz -155 dBc/Hz at 10 kHz Internal 10 MHz reference Auto or software select Small Signal Gain 62 dB min. Gain Stability ±1.5 dB over operating temperature range; ±0.25 dB over 24 hours, fixed temperature Gain Slope ±0.04 dB/MHz max. Small Signal Gain Variation ±0.4 dB pk-pk max. over any 80 MHz band; ±1.50 dB pk-pk max. across the full band Gain Adjustment Range 20 dB min. software controlled Input VSWR 1.5:1 max. (50 ohms) Output VSWR 1.35:1 max. Load VSWR 1.5:1 full spec. compliance Residual AM -80 dBc max. at more than 100 kHz from carrier Phase Noise, max. -63 dBc/Hz at 100 Hz -73 dBc/Hz at 1 kHz -83 dBc/Hz at 10 kHz -93 dBc/Hz at 100 kHz -103 dBc/Hz at 1 MHz AM/PM Conversion 2.5˚/dB max. for a single carrier at 2.5 dB backoff from rated P1dB Harmonic Output -45 dBc max. at rated P1dB (-60 dBc max. with external harmonic filter) Spurious Response at P1dB -60 dBc max. in band Noise Power Density <-70 dBW/4 kHz, passband Intermodulation Distortion -25 dBc max. with respect to each of two equal carriers 5 MHz apart at 3.0 dB total backoff from rated P1dB Primary Power 48 VDC ±20% Power Consumption 260 W max. Remote Control RF Inhibit ON/OFF; Gain Control; Fault Reset; Reference Select Computer/Network Interface Serial RS-232C or 422/485 (Ethernet interface optional) Remote Status Transmit ON/OFF; Summary Fault; Temperature; Fault Indication; RF Inhibit (ON/OFF); Lock Detect; Web Interface Option; Forward Power Monitor Ambient Temperature -40˚C to +55˚C operating in direct sunlight; -40˚C to +60˚C operating out of direct sunlight; -50˚C to +85˚C non-operating Relative Humidity 100% condensing Altitude 12,000 feet with standard adiabatic derating of 2˚C/1,000 feet, operating; 50,000 feet, non-operating Cooling Integral forced air Shock and Vibration 20 g peak, 11 msec, 1/2 sine; 2.1 grms, 5 to 500 Hz RF Output Connection Type N Female (optional: WR-75 waveguide flange with UNC 2B 6-32 threaded holes (M4 available, type SMA optional) L-Band INput Connection Type N female (type SMA optional) Dimensions, L x W x H 10.7” x 5.0” x 4.1” (272 x 127 x 105 mm) Weight 9 lbs (4 kg) typ. Quality Management System - ISO 9001:2008 For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 279, ISSUE R dated JUL 2015