95 GHz CW Emitter VZB2788A1

95 GHz CW Emitter
The model VZB2788A1 is a self contained 95 GHz Emitter consisting of an air-cooled Extended
Interaction Klystron (EIK), power supply, cooling system, input and output RF components, and
supporting electronics for control, monitoring and system protection contained in a wheeled cabinet.
Remote operation is available through an interface to a laptop computer using the software provided.
This equipment comes with a full complement of operating, control and protective equipment, and
supporting documentation.
Operating Frequency:
95.0 GHz ± 150 MHz
Output Power:
80 W CW
Harmonic Distortion:
-20dBc maximum
Noise Figure:
35dB maximum
RF Output Connection:
WR-10 with UG-387/U flange
55” H x 23” W x 32” D
240 kg.
Primary Power:
220 VAC, 50/60Hz, single
Operating Temperature:
+5° to +40° Celsius
Front panel control or remote control via rear panel
mounted, IEEE-488 bus.
Internal forced air cooling permitting continuous full
power operation.
CPI Canada
45 River Drive, Georgetown, Ontario, Canada. L7G2J4
Telephone +1-905-877-0161 e-mail: [email protected]
Amplifier Protection:
RF output mismatch
Waveguide arc
Front Panel Fault / Alarm Display:
High Reflected Power
Waveguide Arc
Tube Over-temperature
Excessive Duty Cycle
Front Panel Gage / LCD or Controller Values:
Forward RF Power
Reverse RF Power
Body Current
Cathode Voltage
Beam Current
Power Supply Temperature
RF Frequency
RF Attenuator Setting
Available accessories:
Source oscillator with power and frequency adjustment
High power rated bi-directional coupler
Integrated dry air pump providing positive air flow within the waveguide.
CPI Canada has developed and manufactured millimetre wave klystrons for over 35 years. We
specialize in pulsed and CW devices from 17 GHz to 220 GHz. Many of these pulsed or CW
EIKs may be configured for use in high power threat emitter service or customized as required.
The values listed represent typical performance from testing.
Formal controlled specifications, with minimum and maximum values, for use in equipment design,
may be obtained from CPI.
For more information, please contact your local CPI sales office or CPI Canada. They may be found
on our website at www.cpii.com.
CPI Canada
45 River Drive, Georgetown, Ontario, Canada. L7G2J4
Telephone +1-905-877-0161 e-mail: [email protected]