FIGURE 1: SCHEMATIC DIAGRAM TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC PARAMETER MIN. PRIMARY INDUCTANCE: (1-3) 0.40 Vrms @ 120 KHz. 587.7 SPEC LIMITS TYP. MAX. 653 718.3 1 UNITS PRIMARY 2 H 2 PRIMARY LEAKAGE IND. (1-3). 0.40 Vrms @ 120 KHz. Short others. -------- -------- 10 PRIMARY 1 TURNS RATIOS: 1-3 : 7-12 1-3 : 6-4 1-2 : 7-12 ---------------------- 20 : 1 6.67 : 1 20 : 1 ------------------------- 10,11,12 H +/-4% +/-4% +/-4% SEC #1B 3 4 7,8,9 BIAS HI-POT: 60 Hz at 1 sec. PRIMARYand BIAS to SECONDARY. 3000 -------- -------- Vrms 6 FIGURE 2: PHYSICAL DIMENSIONS 12 11 P M PIN #1 WHITE DOT 1 2 10 9 8 7 POL-JX010 YYWW 3 4 5 6 30.0 Max. 28.0 Max. 27.0 Max. 3.2 Min. 0.7 DIA. or 0.64 Sq. 3.8 PIN #1 I.D. 1 Notes: 1) Design to comply with the requirements of UL/ CSA/IEC 60950-1. 2) Design to comply with the requirements of UL/ CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply wiht the requirments of the EU RoHS Directive. 7.55 2 3 4 5 6 25.4 12 11 10 9 8 7 REV. 06/06/13 DESCRIPTION OF CHANGES Original Release. RoHS UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN mm. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + 0.3 + 0 O 30' .XX + 0.20 DRAW ING NOT TO SCALE. INDUCTOR CONTROL DRAWING PREMIER P/N: POL-JX010 REVISION: 06/06/13 ENG: PETER PHAM REF: TOP267EG QA: Kevin Clark SHEET: 1 OF 1 BY KC