TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC PARAMETER MIN. PRIMARY INDUCTANCE 130 KHZ @ 0.40V. 3-4 FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. MAX. 1 UNITS 617.5 650 682.5 H LEAKAGE INDUCTANCE 3-4 130 KHZ @ 0.40 V, short FL1-FL2. -------- -------- 10 H PRIMARY RESONANT FREQ. 3-4 1.0 -------- ------- BIAS 2 FL1 SECONDARY 3 MHz FL2 PRIMARY TURN RATIO'S: 3-4 : FL1-FL2 3-4 : 1-2 --------------- 8.8 : 1 11 : 1 --------------- HIPOT: 60 Hz for 1 sec. 1-4 TO FL1-FL2. 3000 -------- -------- + 4% + 4% 4 SHIELD Vrms NC FIGURE 2: PHYSICAL DIMENSIONS mm. 13.0 Max. 0.6 Dia. 15.24 25.0 Max. NOTES: 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements if UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. REV. DESCRIPTION OF CHANGES BY 06/06/13 Original Release. KC RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN mm. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + 0.3 + 5O .XX + 0.20 DRAW ING NOT TO SCALE. TRANSFOMER CONTROL DRAWING PREMIER P/N: POL-JX017 REVISION: 06/06/13 ENG: Peter Pham REF: TOP264VG QA: Kevin Clark SHEET: 1 OF 1