Z-BLOCKER CP-421SE xDSL CPE Splitter - Sweden Description The CP-421SE is a small customer premises equipment (CPE) splitter designed to expedite the service delivery and improve the performance of digital subscriber line (DSL) services. This CPE splitter filters all telephone sets, facsimile machines, answering machines, etc. which are connected to the unit's Swedish standard TE socket. Our DSL splitter design electronically isolates the high-speed DSL data stream from the voice band plain old telephone service (POTS). This design effectively blocks the xDSL and other radio frequencies up to 30 Megahertz. Features The CP-421SE DSL Splitter Applications ● Minimize voice band interference, transmission, signaling and supervision The CP-421SE splitter is used as the first (primary) connection to the main TE socket in the subscribers' premises. It isolates all voice-band equipment devices, including corded/cordless telephones, answering machines, fax machines, 56Kb/s and lower rate modems, automatic dialers, and recorder connectors that are plugged into the secondary sockets throughou the residence or plugged into the CPE-421SE TE socket. The CP-421SE splitter may also be used to isolate the telephone network jack connected to a digital cable and/or satellite television set-top box. ● Compatible with all major xDSL standards including ADSL, VDSL2, V.90 and Metallic Loop Testing The CP-421SE splitter is one of many filter and splitter products manufactured by Pulse. ● Isolate telephone equipment impedances from the xDSL house wiring ● Attenuate xDSL signals to phone equipment to prevent conversion to voice band signals ● Excellent DSL band attenuation that protects voice band equipment and prevents intermodulation distortion from degrading data rates ● Meets Skanova Network's Specification No. 304/1056-KDUA 101 110 Rev. D ● Designed to meet or exceed most ETSI TR 101 728 V 1.1.2 specifications ● CE Certified www.PulseElectronics.com EX125.A (02/12) Z-BLOCKER® CP-421SE xDSL CPE Splitter - Sweden Z-BLOCKER® CP-421SE Filter Specifications DC Resistance to Earth @ 100Vdc DC Resistance from "wire-A to wire-B" @ 100Vdc DC Series Resistance from POTS port to Line port DC Feeding Current Voltage Drop at 25Hz and 50Hz Insertion Loss @ 1 kHz Insertion Loss Distortion; delta between 1 kHz and 200 Hz < f < 4 kHz levels Impedance @ 25 Hz and 50 Hz for line port and phone port Impedance (Return Loss), 300 to 3400Hz, line & phone ports (ZSL & ZR) Impedance (Return Loss), 3400 to 4000Hz, line & phone ports (ZSL & ZR) Longitudinal Conversion Loss 50 Hz to 600 Hz 600 Hz to 3400 Hz 3400 Hz to 4000 Hz 4000 Hz to 10 MHz Isolation (Insertion Loss) 32 kHz to 150 kHz* 150 kHz to 1.1 MHz Noise 300 Hz to 4000 Hz 26 kHz to 1.1 MHz Intermodulation, second and third order harmonics Group Delay Distortion 200 Hz to 600 Hz 600 Hz to 3200 Hz 3200 Hz t 4000 Hz Metering Insertion Loss 12 kHz* 16 kHz Common Mode Impedance 100 kHz 200 kHz 400 kHz 800 kHz 1000 kHz 1100 kHz Dimension (Length x Width x Height) = 78mm x 62mm x 30mm or 53 mm including pins The CP-421SE CPE Splitter for Sweden meets or exceeds ETSI TR 101 728 V1.1.2 specifications, except where indicated (*). CE Mark certified > 20 MΩ > 5 MΩ < 50Ω 0 to 80 mA < 2 Vrms <1 dB <1 dB > 40 kΩ > 14 dB > 12 dB > 40 dB > 46 dB > 40 dB > 40 dB > 45 dB > 55 dB < -75 BVp < -70 dBm > 60 dB < 250 μS < 200 μS < 250 μS < 6 dB < 3 dB 1 kΩ 2.5 kΩ 6.8 kΩ 45 kΩ 13.6 kΩ 10.3 kΩ Pulse Singapore - 135 Joo Seng Rd.#03-02PM Industrial Bldg.Singapore 368363 Tel: +65 6287 8998 Pulse Taiwan - 3F, #198, Zhongyuan Rd., Zhongli City Taoyuan, County 32068, Taiwan Tel: +886 3435 6768 Pulse US - 12220 World Trade Drive, San Diego, CA. 92128 Tel: +1 858 674 8100 www.pulseelectronics.com Specifications subject to change without notice. Excelsus is a registered trade mark of Pulse Electronics. © 2012 Pulse Electronics. EX125.A (02/12)