SACB (5 00W) Series LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE5.0 - 50 Volts 500 watt Peak Pulse Power " * " 标注为常用型号 " * " Stand for commonly used models SACB PART NUMBER * SACB5.0 SACB6.0 SACB7.0 SACB8.0 SACB8.5 SACB10 SACB12 SACB15 SACB18 SACB22 SACB26 SACB30 SACB36 SACB45 SACB50 Marking Code SKE SKG SKM SKR SKT SKX SLE SLM SLT SLX SME SMK SMP SMV SMZ MINIMUM STANDBREAKDOWN OFF VOLTAGE VOLTAGE AT I T=1.0mA (NOTE1) V WM V(BR) (VOLTS) (VOLTS) 5.0 6.0 7.0 8.0 8.5 10.0 12.0 15.0 18.0 22.0 26.0 30.0 36.0 45.0 50.0 7.6 7.9 8.3 8.9 9.44 11.10 13.30 16.70 20.00 24.40 28.90 33.30 40.00 50.00 55.50 MAXIMUM REVERSE LEAKAGE AT V WM I R(uA) 300 300 300 100 50 5 5 5 5 5 5 5 5 5 5 MAXIMUM MAXIMUM MAXIMUM JUNCTION CLAMPING PEAK PULSE CURRENT CAPACITANCE VOLTAGE AT 0 VOLTS AT Ipp=5.0A PER FIG.3 Ipp (AMPS) (pF) V C (V) 10.0 11.2 12.6 13.4 14.0 16.3 19.0 23.6 28.8 35.4 42.3 48.6 60.0 77.0 88.0 44.0 41.0 38.0 36.0 34.0 29.0 25.0 20.0 15.0 14.0 11.1 10.0 8.6 6.8 5.8 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 WORKING INVERSE BLOCKING VOLTAGE V WIB (VOLTS) 75 75 75 75 75 75 75 75 75 75 75 75 75 150 150 INVERSE PEAK BLOCKING INVERSE LEAKAGE BLOCKING CURRENT VOLTAGE V WIB V PIB IIB(mA) (VOLTS) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 REV.2015.02.01 01 | www.spsemi.cn SACB(5 00W) Series LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE5.0 - 50 Volts 500 watt Peak Pulse Power FEATURES DO-214AA (SMB J-Bend) ◎ For surface mounted applications in order to optimize board space ◎ Glass passivated junction Cathode Band 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.073 (1.85) 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.098 (2.5) 0.083 (2.1) 0.012 (0.3) MAX. 0.060 (1.52) 0.030 (0.76) ◎ 500W Peak Pulse Power capability with a 10/1000us waveform,repetition rate (duty cycle): 0.01% ◎ Excellent clamping capability ◎ Low incremental surge resistance ◎ Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional types ◎ Ideal for data line applications ◎ High temperature soldering guaranteed: 260°C/10 seconds,0.375"(9.5mm) lead length,5lbs., (2.3kg) tension 0.220 (5.59) 0.205 (5.21) Dimensions in inches and(millimeters) Transient Voltage Suppressor Diode Schemati MECHANICAL DATA Case：JEDEC DO-214AA. Molded plastic over glass passivated junction Terminal： Solder plated, solderable per MIL-STD-750, Method 2026 Polarity：The band denotes TVS cathode Standard Packaging：12mm tape(EIA STD RS-481) Weight： 0.003ounce, 0.093gram MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation with a 10/1000µs waveform (Note 1) Steady State Power Dissipation at TL= 75°C with lead lengths or 0.375" (9.5mm) Peak Pulse Power Surge Current with a 10/1000 µS waveform (Note 1.FIG.3) Operating junction and Storage Temperature Range SYMBOL VALUE Minimum PppM 500 UNITS Watts PM(AV) 3 Watts IPPM SEE TABLE 1 Amps -55 to +175 °C TJ , TSTG Note： 1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25℃ per Fig. 2 . REV.2015.02.01 02 | www.spsemi.cn SACB(500W) Series LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSORS Ratings and Characteristic Curves(TA=25℃ unless otherwise noted) 100 Pig.1 - Peak Pulse Power Rating Curve Fig.2-Power Derating Curve 100 Non-repetitive Pulse Waveform shown in Fig. 3 Average Power Percentage of Rated Power(%) IPPM-Peak Pulse Power (kW) 30 TA=25°C 10 Impulse Exponential Decay PPK".5" 1 td PPK Half Sine td td=7tp PPK td Square Current Waveforms 1.0s 10s 100s 1.0ms 50 37.5 25 12.5 25 50 75 100 125 150 175 TL Lead Temperature (°C) Fig.3 - Pulse Waveform Fig. 4 - AC Line Protection Application 150 TJ = 25°C tr = 10µsec. IPPM - Peak Pulse Current,% IRSM Peak Power (single pulse) 62.5 0 10ms td - Pulse Width (sec.) Pulse Width (t d) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 75 0 0.1 0.1s 87.5 Low Capacitance TVS Half Value- IPPM 2 50 10/1000µsec.Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 t - Time(ms) REV.2015.02.01 3.0 4.0 4.0 Application Note: Device must be used with two units in parallel,opposite in polarity as shown in circuit for AC signal line protection. 03 | www.spsemi.cn