Thyristor Surge Suppressors (TSS) P0080LA - P5000LA Series - DO-41 @10/700μS , 2KV Description P0080LA - P5000LA Series are designed to protect broadband equipment such as modems, line card, CPE and DSL from damaging over-voltage transients. The series provides a surface mount solution that enables equipment to comply with global regulatory standards. Features and Benefits u Low voltage overshoot u Low on-state voltage u Does not degrade surge capability after multiple surge events within limit u Fails short circuit when surged in excess of ratings u Low Capacitance Schematic Symbol Applicable Global Standards u u u u u u u u u TIA-968-A TIA-968-B ITU K.20/21 Enhanced level ITU K.20/21 Basic Level GR 1089 Inter building GR 1089 Inter building IEC 6100-4-5 YD/T 1082 YD/T 993 YD/T 950 Electrical Parameters Parameter Definition IS Switching Current - maximum current required to switch to on state IDRM Leakage Current - maximum peak off-state current measured at VDRM IH Holding Current - minimum current required to maintain on state IT On-state Current - maximum rated continuous on-state current VS Switching Voltage - maximum voltage prior to switching to on stat VDRM Peak Off-state Voltage - maximum voltage that can be applied while maintaining off state VT On-state Voltage - maximum voltage measured at rated on-state current C0 Off-state Capacitance - typical capacitance measured in off state +I SOCAY Electronics Co., Ltd. Revision September 25, 2013 IT IS IH IDRM -V +V VT VDRM VS -I www.socay.com 1/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Thyristor Surge Suppressors (TSS) P0080LA - P5000LA Series - DO-41 @10/700μS , 2KV Electrical Characteristics Part Number Marking VDRM VS VT @IDRM=5μA @100V/μS @IT=2.2A V min V max C0 IS IT IH V max mA max A max mA min pF min pF max @1MHz P0080LA P008LA 6 25 4 800 2.2 50 25 150 P0300LA P03LA 25 40 4 800 2.2 50 15 140 P0640LA P06LA 58 77 4 800 2.2 150 40 60 P0720LA P07LA 65 88 4 800 2.2 150 35 60 P0900LA P09LA 75 98 4 800 2.2 150 25 55 P1100LA P11LA 90 130 4 800 2.2 150 30 50 P1300LA P13LA 120 160 4 800 2.2 150 25 45 P1500LA P15LA 140 180 4 800 2.2 150 25 40 P1800LA P18LA 170 220 4 800 2.2 150 25 35 P2000LA P20LA 180 220 4 800 2.2 150 20 35 P2300LA P23LA 190 260 4 800 2.2 150 25 35 P2600LA P26LA 220 300 4 800 2.2 150 20 35 P3100LA P31LA 275 350 4 800 2.2 150 20 35 P3500LA P35LA 320 400 4 800 2.2 150 20 35 P4000LA P40LA 360 460 4 800 2.2 150 20 35 P4500LA P45LA 400 540 4 800 2.2 150 20 35 P5000LA P50LA 440 600 4 800 2.2 150 20 35 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional. Surge Ratings 2/10μS1 Series 2/10μS 2 A min A 8/20μS1 1.2/50μS 2 10/160μS1 10/560μS1 10/1000μS1 2 2 2 10/160μS 10/560μS 10/1000μS 5/310μS1 10/700μS A min A min A min A min A min 150 90 50 45 50 150 Notes: 1. Current waveform in µs 2. Voltage waveform in µs 2 ITSM 50/60 Hz A min 20 di/dt Amps/µs max 500 - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C Thermal Considerations Package DO-41 Symbol Parameter Value Unit TJ Operating Junction Temperature Range - 40 to + 150 °C TS Storage Temperature Range - 40 to +150 °C RθJA Thermal Resistance: Junction to Ambient 90 °C/W SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 2/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Thyristor Surge Suppressors (TSS) P0080LA - P5000LA Series - DO-41 @10/700μS , 2KV Characteristic Curves Figure 2 - tr × td Pulse Waveform Figure 1 - V-I Characteristics +I Ipp – Peak Pulse Current - % Ipp IT IS IH IDRM -V +V VT VDRM VS tr=rise time to peak value td=decay time to half value 100 Peak Value Waveform=tr×td 50 Half Value 50 tr td 0 t – Time (μs) -I Figure 4 - Normalized DC Holding Current Versus Case Temperature Figure 3 - Normalized VS Change Versus Junction Temperature 2.0 1.8 IH IH (TC=25℃) 12 10 8 6 25℃ 4 2 Ration of Percent of VS Change - % 14 9 -4 -6 -8 1.6 1.4 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ℃ Junction Temperature (TJ) - ℃ SOCAY Electronics Co., Ltd. Revision September 25, 2013 25℃ 1.2 www.socay.com 3/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Thyristor Surge Suppressors (TSS) P0080LA - P5000LA Series - DO-41 @10/700μS , 2KV Environmental Specifications Physical Specifications 80% Rated VDRM (VAC Peak ) +125°C or +150°C, High Temp Voltage Lead Material Copper Alloy High Temp Voltage Blocking Blocking 504 or 1008 hrs. MIL-STD-750 (Method Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 1040) JEDEC, JESD22-A-101 -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. Temp Cycling MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. Humidity JEDEC, JESD22-A-101 +150°C 1008 hrs. High Temp Storage EIA/ MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock Thermal Shock 10 cycles. 0°C to +100°C, 5 min. dwell, 10 sec. transfer, MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure +121°C, 100%RH, 2atm, 24 up to 168 hrs. Cooker Test) EIA/Cooker Test) JEDEC, JESD22-A-102 +260°C, 30 secs. MIL-STD-750 (Method 2031 Resistance to Solder Heat Moisture Sensitivity 85%RH, +85°C, 168 hrs., 3 reflow cycles Level Level (+260°C Peak). JEDEC-J-STD-020, Level 1 Soldering Parameters Reflow Condition TP Ramp-up Critical Zone TL to TP Pre Heat Lead–free assembly -Temperature Min (Ts(min)) +150°C -Temperature Max (Ts(max)) +200°C -Time (min to max) (ts) 60 -180 Seconds TL Temperature TS(max) Ramp-down Average ramp up rate ( Liquidus Temp TL) to peak 3°C/Second Max TS(max) to TL - Ramp-up Rate 3°C/Second Max TS(min) Preheat 25 Time to peak temperature (t 25℃ to peak) Time SOCAY Electronics Co., Ltd. Revision September 25, 2013 - Temperature (TL) (Liquidus) +217°C - Time (min to max) (ts) 60 -150 Seconds Reflow Peak Temperature (TP) 260 +0/-5°C Time within 5°C of actual peak Temperature (tp) 30 Seconds Max Ramp-down Rate 6°C/Second Max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed +260°C www.socay.com 4/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Thyristor Surge Suppressors (TSS) P0080LA - P5000LA Series - DO-41 @10/700μS , 2KV Part Marking Part Numbering Part Marking Code (Refer to Electrical Characteristics Table) Date code Dimensions DO-41 Inches Millimeters Dimensions Min Max Min Max B 0.028 0.035 0.70 0.90 D 0.102 0.140 2.60 3.60 G 0.193 0.220 4.90 5.60 L 1.000 25.40 Packaging Part Number Pxxx0LA Description Quantity Industry Standard DO-41 Axial Tape & Reel 5000 EIA-RS-296-D DO-41 Bulk Pack 500 N/A Tape and Reel Specifications DO-41 13 （330.2） Dimensions are in inches (and millimeters) 0.68 （17.27） 2.55 （64.8） 2.07 （52.6） 2.7 （68.6） 0.20 （5.08） 0.24 （6.10） Direction of Feed 3.52 （89.40） SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 5/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information.