Part Number: XZMDKDGCBD110W 1.6x1.6mm FULL-COLOR SURFACE MOUNT LED Package Schematics Features ● Ideal for indication light on hand held products ● Long life and robust package ● Standard Package: 2,000pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● RoHS compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MDK DG CBD (AlGaI (InGa (InGa Unit nP) N) N) 3.3 V mA Forward Voltage (Max.) (IF=20mA) VF 2.5 4.1 4.0 V mA Reverse Current (Max.) (VR=5V) IR 10 50 50 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 645* 515* 460* nm 5 V Forward Current IF 30 25 30 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 150 150 Power Dissipation PD Tstg 75 102.5 120 mW - 450 250 V Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 630* 525* 465* nm °C Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 28 30 25 nm C 35 45 100 pF -40 ~ +85 Capacitance (Typ.) (VF=0V, f=1MHz) Part Number XZMDKDGCBD110W Unit 3.3 5 Storage Temperature CBD (InGaN) 1.95 5 TA DG (InGaN) VF VR Operating Temperature MDK (AlGaInP) Forward Voltage (Typ.) (IF=20mA) Reverse Voltage Electrostatic Discharge Threshold (HBM) Operating Characteristics (TA=25°C) Emitting Color Emitting Material Red AlGaInP Green InGaN Blue InGaN Lens-color Water Clear *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Mar 25, 2014 Luminous Intensity CIE127-2007* (IF=20mA) mcd Wavelength CIE127-2007* nm λP min. typ. 40* 79* 645* 200* 297* 515* 40* 69* 460* XDSB4378 V4-Z Viewing Angle 2θ 1/2 120° Layout: Maggie L. P. 1/4 Part Number: XZMDKDGCBD110W 1.6x1.6mm FULL-COLOR SURFACE MOUNT LED MDK DG CBD Mar 25, 2014 XDSB4378 V4-Z Layout: Maggie L. P. 2/4 Part Number: XZMDKDGCBD110W 1.6x1.6mm FULL-COLOR SURFACE MOUNT LED LED is recommended for reflow soldering and soldering profile is shown below. The device has a single mounting surface. The device must be mounted according to the specifications. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specification (Units : mm) Reel Dimension Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Mar 25, 2014 XDSB4378 V4-Z Layout: Maggie L. P. 3/4 Part Number: XZMDKDGCBD110W 1.6x1.6mm FULL-COLOR SURFACE MOUNT LED PACKING & LABEL SPECIFICATIONS XZxxx110x TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Mar 25, 2014 XDSB4378 V4-Z Layout: Maggie L. P. 4/4