Datasheet

DIN Twin-contact Connectors
XC5
A Wide Variety of DIN Connectors That
Conform to UL/CSA Standards.
■ Fully preserve the characteristics of normal DIN connectors while increasing the number of terminals available.
■ A wide product range to fit almost any application.
■ Meeting world market needs with products ranging from
one-piece connectors (card edge) to two-piece connectors.
■ Use the twin-contact system for high reliability and low
cost.
■ Lower insertion force as a result of FEM analysis techniques.
■ Mates with OMRON's XC6-series connectors.
■ Conform to UL standards (file no. E103202) and
CSA standards (file no. LR 62678).
RoHS Compliant
■ Ratings and Characteristics
Rated current
2A
Rated voltage
300 VAC
Contact resistance
20 mΩ max. (at 20 mV, 100 mA max.)
Insulation resistance 106 MΩ min. (at 100 VDC)
Dielectric strength
1,000 VAC for 1 min (leakage current:
1 mA max.)
Total insertion force
0.59 N max. per contact
Removal force
0.15 N min. (with test gauge, t = 0.56 mm)
Insertion durability
200 times
Ambient operating
temperature
Operating: −55 to 125°C (with no icing)
■ Materials and Finish
Item
Plugs
(See note 2.)
Sockets
Housings
Fiber-glass reinforced PBT resin (UL94V-0)/gray
Contacts Mating
end
Brass/nickel base,
0.4-µm gold plating
(See note 1.)
Phosphor bronze/nickel
base, 0.4-µm gold plating
(See note 1.)
Brass/nickel base,
2.0-µm tin plating
Phosphor bronze/nickel
base, 2.0-µm tin plating
Terminal
Note:
1. For non-standard plating specifications, contact your OMRON
representative.
2. Wrap terminal contacts are made from phosphor bronze.
■ Applicable Wrap Post Wire Sizes
AWG30, AWG28, AWG26, or AWG24
(Solid wire: 0.25 to 0.51 mm dia.)
■ Wrap Post Length
3 wires
1
XC5C Triple-row Plugs, DIN C-type (Standard)
■ Dimensions
(unit: mm)
XC5C-@@22
(With right-angle DIP
terminals)
Coding Key position
Two, 2.8 dia.
XC5C
DIP terminal cross-section
view
Mounting holes (bottom view)
0.8 +0.1
dia.
0
0.64 dia.
Two, 2.8 dia.
Dimensions
No. of
contacts
Dimensions (mm)
A
B
C
32*
53.2
47.4
38.10
48
53.2
47.4
38.10
64*
93.8
88.0
96
93.8
88.0
F
48.26
43.3
44.6
5, 12
48.26
43.3
44.6
5, 12
78.74
88.90
83.9
85.2
6, 13, 20, 27
78.74
88.90
83.9
85.2
6, 13, 20, 27
■ Ordering Information
No. of contacts
32*
48
Terminal type
Right-angle DIP
terminals
Model
XC5C-3222
XC5C-4822
64*
XC5C-6422
96
XC5C-9622
*Has no center row (row b).
6
DIN Twin-contact Connectors
Coding Key positions
(contact No.)
E
*Has no center row (row b).
XC5
D