Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# (978) 453-7272 www.total-power.com
30W Single Output Encapsulated Type
IRM-30
series
Bauar t gepruft
Sicherheit
egel ma ge
od
o s
be wac
g
www.tuv.com
ID 2000000000
■ Features
Universal AC input / Full range
Compact size
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
Isolation ClassⅡ
No load power consumption<0.1W
100% full load burn-in test
High reliability
3 years warranty
■ Applications
Industrial electrical equipment
Mechanical equipment
Factory automation equipment
Handheld electronic device
■ Description
IRM-30 is a 30W miniature (69.5*39*24mm) AC-DC module-type power supply, ready to be soldered onto
the PCB boards of various kinds of electronic instruments or industrial automation equipments. This product
allows a universal input voltage range of 85~264VAC. The plastic case with 94V-0 fire prevention level
and the fully-potted silicone enhance the heat dissipation and meet the anti-vibration demand up to 5G;
moreover, it provides the fundamental resistance to dust and moisture.
With the high efficiency up to 90% and the extreme low no-load power consumption below 0.1W, IRM-30
series fulfills the worldwide regulation for the low power consumption requirement for electronics. The entire
series is a Class Ⅱ design (no FG pin), incorporating the built-in EMI filtering components, enabling the
compliance with EN55022 Class B; the supreme EMC features keep the end electronic units from
electromagnetic interference. In addition to module-type model (the standard model), IRM-30 series
also supplies the block terminal wiring type model (ST).
■ Model Encoding
IRM - 30 - 5 ST
{
Blank (standard) : PCB mounting style
ST (optional)
: Screw terminal style
Output voltage
Output wattage
Series name
File Name:IRM-30-SPEC 2014-07-14
Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# (978) 453-7272 www.total-power.com
IRM-30
30W Single Output Encapsulated Type
series
SPECIFICATION
MODEL
OUTPUT
INPUT
IRM-30-5
IRM-30-12
IRM-30-15
IRM-30-24
IRM-30-48
DC VOLTAGE
5V
12V
15V
24V
48V
RATED CURRENT
6A
2.5A
2A
1.3A
0.63A
CURRENT RANGE
0 ~ 6A
0 ~ 2.5A
0 ~ 2A
0 ~ 1.3A
0 ~ 0.63A
RATED POWER
30W
30W
30W
31.2W
30.2W
RIPPLE & NOISE (max.) Note.2 200mVp-p
240mVp-p
300mVp-p
480mVp-p
480mVp-p
VOLTAGE TOLERANCE Note.3 ±2.5%
±2.5%
±2.5%
±2.5%
±2.5%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME
1000ms, 30ms/230VAC
HOLD UP TIME (Typ.)
40ms/230VAC
VOLTAGE RANGE
85 ~ 264VAC
FREQUENCY RANGE
47 ~ 440Hz
88%
90%
EFFICIENCY (Typ.)
81%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
0.75A/115VAC
87%
88%
0.5A/230VAC
COLD START 25A/115VAC
< 0.75mA/240VAC
OVERLOAD
105% ~ 160% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
12.6 ~ 16.2V
15.75 ~ 20.25V
5.25 ~ 6.75V
Protection type : Shut off o/p voltage, clamping by zener diode
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
ISOLATION RESISTANCE
EMC
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSION
PACKING
NOTE
12ms/115VAC at full load
LEAKAGE CURRENT
PROTECTION
OTHERS
1500ms, 30ms/115VAC at full load
45A/230VAC
25.2 ~ 32.4V
50.4 ~ 64V
-30 ~ +70℃ (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level (surge L-N : 1KV), criteria A
593.3Khrs min. MIL-HDBK-217F (25℃)
PCB mounting style : 69.5*39*24mm (L*W*H)
Screw terminal style : 91*39.5*28.5mm (L*W*H)
PCB mounting style : 0.109Kg;144pcs/16.7Kg/0.97CUFT
Screw terminal style :0.12Kg;120pcs/15.4Kg/0.74CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
File Name:IRM-30-SPEC 2014-07-14
Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# (978) 453-7272 www.total-power.com
IRM-30
30W Single Output Encapsulated Type
Block Diagram
series
fosc : 65KHz
RECTIFIERS
&
FILTER
EMI
FILTER
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PWM
CONTROL
Derating Curve
+V
-V
DETECTION
CIRCUIT
Output Derating VS Input Voltage
100VAC & 230VAC
for others
100
100
90
80
80
230VAC for 5V
70
100VAC for 5V
LOAD (%)
LOAD (%)
60
40
20
-30
0
10
20
30
40 45 50
60
70
(HORIZONTAL)
60
50
40
85
AMBIENT TEMPERATURE (℃)
95
100
115
120
140
160
180
200
220
240
264
INPUT VOLTAGE (VAC) 60Hz
Mechanical Specification
Case No.
Unit:mm
•PCB mounting style(Standard)
69.5
61.5
AC/L
8.5
-V
3.5±1mm
AC/N
1.04
+V
39
5.5 4.5
24
4.5
4
BOTTOM
VIEW
P/N diameter:1.04
File Name:IRM-30-SPEC 2014-07-14
Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# (978) 453-7272 www.total-power.com
IRM-30
30W Single Output Encapsulated Type
series
•Screw terminal style (Optional)
39.5
28.5
20
91
AC/L AC/N
80
4-ψ3.4
5.7
+V -V
5
Installation Manual
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
File Name:IRM-30-SPEC 2014-07-14