Features Regulated Converters ● ● ● ● ● ● ● ● POWERLINE Very Compact Low AC/DC Power Supply High Efficiency Single & Dual Output Options Continuous Short Circuit Protection Isolated Output 3.75kVAC/1 min EN55022 Class B Compliant High Operating Temperature Low Standby Power Consumption AC/DC-Converter with 3 year Warranty 10 Watt Single / Dual Output Selection Guide Part Number Input Range (VAC) Output Voltage (VDC) Output Current (mA) Efficiency (typ.) (%) Max. Capacitive Load (1+2) (µF) RAC10-3.3SC/277 80-305 3.3 2500 75 50000 RAC10-05SC/277 80-305 5 2000 78 36000 RAC10-12SC/277 80-305 12 840 80 8600 RAC10-15SC/277 80-305 15 670 78 6000 RAC10-24SC/277 80-305 24 420 80 2700 RAC10-05DC/277 80-305 ±5 ±1000 77 ±21000 RAC10-12DC/277 80-305 ±12 ±420 79 ±3700 RAC10-15DC/277 80-305 ±15 ±340 79 ±2900 RoHS Specifications (measured at TA 25°C, full load after warm-up) Input Voltage Range (with Derating) 2011/65/EU 6/6 80-305VAC or 113-430VDC Rated Power 10 Watts Input Frequency Range (for AC Input) 47-63Hz 115VAC 250mA typ. 230VAC 160mA typ. No Load Power Consumption 230VAC 300mW max. Inrush Current (cold Start-Up) 115VAC 15A max. 230VAC Leakage Current Output Voltage Accuracy 0.25mA max. 1.5A slow blow type 3.3V ±3% typ. all others ±2% typ. Line Voltage Regulation (low line, high line at full load) ±0.3% typ. Load Voltage Regulation 3.3V, 5V -1.5% typ. 12V ±1% typ. (0 -100% Load) all others ±0.5% typ. Minimum Load Output Ripple and Noise (with 0.1µF across outputs @20mHz bandwidth) 0% 3.3V / 5V 50mVp-p typ. 12V / 15V / 24V 125mVp-p typ. ±5 200mVp-p typ. ±12 125mVp-p typ. ±15 200mVp-p typ. Operating Frequency Hold-up time Isolation Voltage (input to output) Short Circuit Protection RAC10-C/277 30A max. 250VAC/50Hz External Fuse Recommended EN60950-1 Certified UL60950-1 Certified CE marked Derating-Graph (Ambient Temperature) 100 80 Load % Input Current (full load) E224736 60 40 20 0 -20 0 20 40 60 Temperature °C 70 80 100 100kHz 230VAC/50Hz 60ms min. 3.75kVAC / 1minute Hiccup, Automatic Restart continued on next page Refer to Application Notes www.recom-power.com REV: 1/2015 PA-39 RAC10-xxS_DC /277 Series POWERLINE AC/DC-Converter Specifications (measured at TA 25°C, full load after warm-up) Output Overvoltage Protection Latch off Over Voltage Category OVC II Overcurrent Protection Automatic Recovery Operating Temperature Range (free air convection, with derating) Input Voltage vs Load -20°C to +70°C Storage Temperature Range -40°C to +7 5°C 100 Case Material Epoxy with Fibreglass (UL94V-0) 80 Dimension (L x W x H) 52.4 x 27.4 x 23.5mm Package Weight 62g±5g Certifications UL General Safety IEC/EN General Safety EMC Report: E224736-A20 UL60950-1, 2nd Edition Report: SPCLVD1210109 EN60950-1, 2nd Edition Report: T121026N02-E Output Power % 95% RH max. Humidity 60 40 20 0 80 90 100 115 Input Voltage (VAC) EN 55022 Class B Report: T121026N02-E EN 55024 MTBF (+25°C) using MIL-HDBK-217F 320 x 103 hours (+70°C) using MIL-HDBK-217F 120 x 10³ hours 230 264 277 305 Notes: Note1: Measured @ 230VAC / 50Hz / Ta=25°C with constant resistant mode at full load. Note2: If used @ 115VAC / 60Hz with full load, max. capacitive load is less, please contace RECOM for detailed information. Characteristics (measured @ 115/230VAC, 50/60Hz after warm up) RAC10-xxDC/277 100 80 80 60 60 Efficiency (%) 100 Efficiency (%) RAC10-C/277 RAC10-xxSC/277 40 RAC10-12SC/277 RAC10-15SC/277 RAC10-05SC/277 RAC10-3.3SC/277 RAC10-24SC/277 20 0 0 40 20 60 80 0 100 0 2 1,5 1,5 Deviation (%) 24V 0 -0,5 5V -1 0 20 40 80 100 ±15V 60 ±5V 0,5 0 ±12V -0,5 -1 12V -1,5 -2 60 1 3.3V 0,5 40 20 Load (%) 2 1 Deviation (%) RAC10-12SC/277 RAC10-15SC/277 RAC10-05SC/277 20 Load (%) -1,5 80 -2 100 Load (%) PA-40 40 0 20 40 60 80 100 Load (%) REV: 1/2015 www.recom-power.com RAC10-xxS_DC /277 Series POWERLINE AC/DC-Converter Application Notes Fuse VAC in (L) VDC out + VAC in (N) VDC out - 0.1uF/50V 1.5-2A Slow blow type Ground Ring Fuse 1. Recommended external input fuse 1.5A / slow blow type. 2. Do not use scope ground lead to measure the output ripple & noise. 0.1uF/50V VAC in (L) VDC out + VDC out + 1.5-2A Slow blow type COM VDC out - VAC in (N) VDC out - 0.1uF/50V Standard Application Circuit Fuse L VAC in (L) VDC out + LOAD 1.5-2A slow blow type LOAD COM LOAD N VAC in (N) VDC out - DUAL 100VAC 115VAC 230VAC 277VAC SINGLE RAC10/277 Standard Package Style and Pinning RAC10-xxSC/277 52.5 51.5 27.4 26.7 23.5 6.0 45.75 Æ1.0mm 10.16 2.54 1.2ø+0.2/-0.1 2 13.7 10.16 Bottom View Top View 3 10.16 10.16 1 4 2.54 Recommended Footprint Details www.recom-power.com REV: 1/2015 Pin ConnectionsPin # Single Out 1 VAC in (N) 2 VAC in (L) 3 -VDC out 4 +VDC out XX.X ± 0.5 mm XX.XX ± 0.25 mm PA-41 RAC10-xxS_DC /277 Series POWERLINE AC/DC-Converter Standard Package Style and Pinning RAC10-xxDC/277 52.5 51.5 27.4 26.7 23.5 6.0 10.16 45.75 Æ1.0mm 10.16 2.54 1.2ø+0.2/-0.1 3 2 13.7 10.16 10.16 Bottom View Top View 4 10.16 10.16 1 5 Pin ConnectionsPin # Single Out 1 VAC in (N) 2 VAC in (L) 3 -VDC out 4 COM 5 +VDC out XX.X ± 0.5 mm XX.XX ± 0.25 mm 2.54 RAC10/277 Recommended Footprint Details The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. PA-42 REV: 1/2015 www.recom-power.com