SEAL100FP Sealed Conversion Board for Converting from 100-pin 0.65mm-pitch QFP (100P6S-A) or LCC (100D0) to 100-pin Standard Pitch Function The SEAL100FP is a board for converting the foot pattern of an MCU with a 100-pin 0.65mm-pitch QFP (100P6S-A) or LCC (100D0) package to the standard pitch. Also, this board converts a 100P6S-A or 100D0 IC socket foot pattern to the standard pitch. Application The SEAL100FP is a standard pitch converter that is sealed on its reverse side. It is used to connect an MCU or IC socket with a 100P6S-A or 100D0 package to a standard-pitch universal board, etc. Since there is a mounting pattern for flat packages on the board, it allows mask-ROM or PROM MCUs or 100-pin QFP/LCC IC sockets to be mounted in place directly. Dimensions 50.80(D)×43.18(W)×0.17(T)mm Foot Pattern Reference Dimensions [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. SEAL64FP Sealed Conversion Board for Converting from 64-pin 0.8mm-pitch QFP (64P6N-A) or LCC (64D0) to 64-pin Standard Pitch Function The SEAL64FP is a board for converting the foot pattern of an MCU with a 64-pin 0.8mm-pitch QFP (64P6N-A) or LCC (64D0) package to the standard pitch. Also, this board converts a 64P6N-A or 64D0 IC socket foot pattern to the standard pitch. Application The SEAL64FP is a standard pitch converter that is sealed on its reverse side. It is used to connect an MCU or IC socket with a 64P6N-A or 64D0 package to a standard-pitch universal board, etc. Since there is a mounting pattern for flat packages on the board, it allows mask-ROM or PROM MCUs or 64-pin QFP/LCC IC sockets to be mounted in place directly. Dimensions 38.10(D)×38.10(W)×0.17(T)mm Foot Pattern Reference Dimensions [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. SEAL80FP Sealed Conversion Board for Converting from 80-pin 0.8mm-pitch QFP (80P6-B or 80P6N-A) or LCC (80D0) to 80-pin Standard Pitch Function The SEAL80FP is a board for converting the foot pattern of an MCU with an 80-pin 0.8mm-pitch QFP (80P6-B or 80P6N-A) or LCC (80D0) package to the standard pitch. Also, this board converts an 80P6-B, 80P6N-A or 80D0 IC socket foot pattern to the standard pitch. Application The SEAL80FP is a standard pitch converter that is sealed on its reverse side. It is used to connect an MCU or IC socket with an 80P6-B, 80P6N-A or 80D0 package to a standard pitch universal board, etc. Since there is a mounting pattern for flat packages on the board, it allows mask-ROM or PROM MCUs or 80-pin QFP/LCC IC sockets to be mounted in place directly. Dimensions 43.18(D)×38.10(W)×0.17(T)mm Foot Pattern Reference Dimensions [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. Discontinued product SEAL80FPS Sealed Conversion Board for Converting from 80-pin 0.8mm-pitch LCC (80D0) to 80-pin Standard Pitch Function The SEAL80FPS is a board for converting the foot pattern of an MCU with an 80-pin 0.8mm-pitch LCC (80D0) package to the standard pitch. Application The SEAL80FPS is a standard pitch converter that is sealed on its reverse side. It is used to connect an MCU with an 80D0 package to a standard pitch universal board, etc. The SEAL80FPS has an LCC socket (IC61-0804-046 made by Yamaichi Electronics Co., Ltd.). Dimensions 43.18(D)×38.10(W)×6.37(H)mm Foot Pattern Reference Dimensions [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies.