Click here for this datasheet translated into Chinese! FSHDMI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer Features Description -25db Non-Adjacent Channel Crosstalk at 1.65Gbps Low Signal Loss: -1.5dBg attenuation at 1.65Gbps Isolation Ground Between Channels Fast Turn-on/off Time (< 6ns) 1.65Gbps Throughput 8kV ESD Protection Low Skew: Intra-pair <90ps, Inter-pair < 150ps Low Power Consumption: 1µA Maximum The FSHDMI08 is a wide-bandwidth switch designed for routing HDMI link data, clock, and the relevant DDC and CEC control signals that support the data rate up to 1.65Gbps per channel for UXGA resolution. Applications include LCD TVs, DVD, set-top boxes, and notebook designs with multiple digital video interfaces. This switch allows the passage of HDMI link signals with ultra-low non-adjacent channel crosstalk and ultralow off isolation. This is critical to minimize ghost images between active video sources in video applications. The wide bandwidth of this switch allows the high-speed differential signal to pass through with minimal additive skew and phase jitter. The pinout supports an HDMI standard-A connector PCB layout. Applications XGA and 720p DVI and HDMI Video Source Selection IMPORTANT NOTE: For additional information, [email protected]. please contact Ordering Information Order Number FSHDMI08MTDX Package Description Eco Status Packing Method 56-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide RoHS Tape and Reel For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. Primary HDMI Source TMDS Channels Graphics Processor Secondary Source DDC & CEC HDMI Receiver Primary Source DDC & CEC FSHDMI08 Secondary HDMI Source Control Channels Figure 1. Single-Link HDMI Application © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 www.fairchildsemi.com FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer August 2009 FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer Functional Diagram 1D2+ D2+ 1D2- D2- 1D1+ D1+ 1D11D0+ D1D0+ 1D0- D0- 1CLK+ CLK+ 1CLK- CLK- 2D2+ 2D22D1+ 2D12D0+ 2D02CLK+ VCC3 /OEDDC SDDC V DDC 2CLKControl SCL SDA CEC HPD /OETMDS STMDS SCL1 SDA1 CEC1 HPD1 SCL2 DGND SDA2 CEC2 HPD2 GND Figure 2. Functional Diagram Pin Descriptions Pin 1-4,6,7,11-14,16,17, 47,48,50,51,53,54 8,9,18,19,44,45 24,28,33 22,26,35 23,27,34 21,25,36 29 20,39,40,55,56 30 5,10,15,38,43,46,49,52 32,42 31,41 Name Description 1Dn+, 1Dn-, 2Dn+, 2Dn-, Dn+, Dn- TMDS Data Channels 1CLK+, 1CLK-, 2CLK+, 2CLK-, CLK+, CLKHPD1, HPD2, HPD SCL1, SCL2, SCL SDA1, SDA2, SDA CEC1, CEC2, CEC VDDC VCC3 DGND GND STMDS, SDDC /OETMDS, /OEDDC TMDS Clock Channels Hot Plug Detects Serial Clock (DDC) Serial Data (DDC) Consumer Electronics Control (CEC) DDC Power TMDS Power DDC/CEC GND GND Select Pins (TMDS, DDC) Output Enable (TMDS, DDC) © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 www.fairchildsemi.com 2 FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer Pin Assignments 1D2+ 1 56 VCC3 1D2- 2 55 VCC3 1D1+ 3 54 D2+ 1D1- 4 53 D2- GND 5 52 GND 1D0+ 6 51 D1+ 1D0- 7 50 D1- 1CLK+ 8 49 GND 1CLK- 9 48 D0+ GND 10 47 D0- 2D2+ 11 46 GND 2D2- 12 45 CLK+ 2D1+ 13 44 CLK- 2D1- 14 43 GND GND 15 42 STMDS 2D0+ 16 41 /OETMDS 2D0- 17 40 VCC3 2CLK+ 18 39 VCC3 2CLK- 19 38 GND VCC3 20 37 DGND CEC1 21 36 CEC SCL1 22 35 SCL SDA1 23 34 SDA HPD1 24 33 CEC2 25 32 SDDC SCL2 26 31 /OEDDC SDA2 27 30 DGND HPD2 28 29 VDDC HPD Figure 3. Pin Assignments Truth Table STMDS, SDDC /OETMDS, /OEDDC Don’t’ Care Logic Level HIGH Logic Level LOW Logic Level LOW Logic Level HIGH Logic Level LOW © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 Function All Ports Disconnected (Hi-Z) 1Dn+/1Dn-=Dn+/Dn-; 1CLK+/ 1CLK-=CLK+/CLK-; HPD1=HPD; SCL1=SCL; SDA1=SDA; CEC1=CEC 2Dn+/2Dn-=Dn+/Dn-; 2CLK+/ 2CLK-=CLK+/CLK-; HPD2=HPD; SCL2=SCL; SDA2=SDA; CEC2=CEC www.fairchildsemi.com 3 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC3 Supply Voltage – TMDS Channels -0.5 4.6 V VDDC Supply Voltage – 5V DDC -0.5 6.0 V (1) VSWTMDS (1) VSWDDC VCNTRLT (1) (1) VCNTRLD Switch I/O Voltage 1Dn+, 1Dn-, 2Dn+, 2Dn-, Dn+, Dn-, 1CLK+, 1CLK-, 2CLK+, 2CLK-, CLK+, CLK- -0.5 VCC3 + 0.3 V Switch I/O Voltage HPD1, HPD2, HPD, SCL1, SCL2, SCL, SDA1, SDA2, SDA, CEC1, CEC2, CEC -0.5 VDDC + 0.3 V Control Input Voltage STMDS, /OETMDS -0.5 4.6 V Control Input Voltage SDDC, /OEDDC -0.5 6.0 V IIK Input Clamp Diode Current -50 mA ISW Switch I/O Current (Continuous) 128 mA TSTG Storage Temperature Range +150 °C -65 TJ Maximum Junction Temperature +150 °C TL Lead Temperature (Soldering, 10 Seconds) +260 °C ESD Human Body Model (JEDEC: JESD22-A114) I/O to GND 8.0 All Other Pins 2.5 kV 2.0 Charged Device Model (JEDEC: JESD22-C101) Note: 1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Min. Max. Unit 4.3 V VCC3 TMDS Supply Voltage – 3V 3.0 VDDC DDC Supply Voltage 3.0 5.5 V VCNTRLT Control Input Voltage – STMDS, /OETMDS 0 VCC3 V VCNTRLD Control Input Voltage – SDDC, /OEDDC 0 VDDC V VSWTMDS Switch I/O Voltage for HDMI path VCC3 – 0.6 VCC3 V VSWDDC Switch I/O Voltage for DDC path 0 VDDC V -40 +85 ºC +80 ºC/W TA Operating Temperature θJA Thermal Resistance (Free Air) © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 www.fairchildsemi.com 4 FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer Absolute Maximum Ratings All typical values are for VCC3=3.3V and VDDC=5.0V at 25°C unless otherwise specified. Symbol Parameter VCC3 / VDDC (V) Conditions TA=- 40°C to +85°C Min. VIK Clamp Diode Voltage VCC3=3.0 VDDC=5.0 VIH Control Input Voltage High VCC3=3.0 to 3.6 VDDC=3.0 to 5.5 VIL Control Input Voltage Low VCC3=3.0 to 3.6 VDDC=3.0 to 5.5 IOZTMDS Off State Leakage TMDS Channels VCC3=3.6 VDDC=5.5 0 ≤ VSWTMDS ≤ VCC3 IOZDDC Off State Leakage DDC/CEC Channels VCC3=3.6 VDDC =5.5 0 ≤ VSWDDC ≤ VDDC IINTMDS Control Input Leakage (STMDS, /OETMDS) VCC3=3.6 VDDC =5.5 IINDDC Control Input Leakage (SDDC, /OEDDC) ICC3 IDDC IIN=-18mA Typ. Unit Max. -1.2 2 V V 0.8 V -1 1 µA -5 5 µA VSWDDC=0 to VCC3 -1 1 µA VCC3=3.6 VDDC =5.5 VSWDDC=0 to VDDC -1 1 µA Quiescent Supply Current -TMDS VCC3=3.6 VDDC =5.5 VSWTMDS=VCC3 – 0.6 or VCC3, IOUT=0 2 µA Quiescent Supply Current -DDC VCC3=3.6 VDDC =5.5 VSWDDC=0 or VDDC, IOUT=0 2 µA ∆ICCT3 Increase in ICC3 VCC3=3.6 VCC5=5.5 One input at 3.0V; Other inputs at VCC30.6 or VCC3 100 µA ∆ICCTD Increase in IDDC VCC3=3.6 VCC5=5.5 One input at 3.0V; Other inputs at VDDC 15 µA © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 Figure 5 Figure 5 www.fairchildsemi.com 5 FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer DC Electrical Characteristics All typical values are for VCC3=3.3V and VDDC=5.0V at 25°C unless otherwise specified. Symbol Parameter VCC3/ VDDC (V) Conditions TA=- 40ºC to +85ºC Min. Typ. Max. 4 6 Unit TMDS Channels tONTMDS tOFFTMDS tBBM-TMDS tpd (tpLH,tpHL) tjitter Turn-On Time S, /OE to Output VCC3=3.0 to 3.6 VDDC =5.0 Turn-Off Time S to Output VCC3=3.0 to 3.6 VDDC =5.0 Break-Before-Make (2) Time VCC3=3.0 to 3.6 VDDC =5.0 Switch Propagation (2) Delay VCC3=3.0 to 3.6 VDDC =5.0 Total Jitter (DJ+RJ) VCC3=3.0 to 3.6 VDDC =5.0 VSWTMDS=VCC3 -0.5, RPU=50Ω, CL=5pf Figure 6, Figure 7 ns VSWTMDS=VCC3 -0.5, RPU=50Ω, CL=5pf 2 4 Figure 6, Figure 7 VSWTMDS=VCC3 -0.5, RPU=50Ω, CL=5pf 1 ns Figure 15 RPU=50Ω, CL=5pf 400 ps 90 ps 50 60 % 55 100 ps 90 160 ps Figure 14 f=165MHz clock with 50% duty cycle, RPU=50Ω, CL=5pf Figure 14 tratio Duty Cycle Ratio VCC3=3.0 to 3.6 VDDC =5.0 f=165MHz clock with 50% duty cycle, RPU=50Ω, CL=5pf 40 Figure 14 23 tSK1 tSK2 OIRRTMDS XtalkTMDS fmax Intra-Pair Skew (TMDS VCC3=3.0 to 3.6 VDDC =5.0 Cn+ to Cn-) Inter-Pair Skew (Between any two TMDS switch pair paths) f=1.65Gbps, 2 -1 PRBS, RPU=50Ω, CL=5pf Figure 14 23 VCC3=3.0 to 3.6 VDDC =5.0 f=1.65Gbps, 2 -1 PRBS, RPU=50Ω, CL=5pf Figure 14 VCC3=3.0 to 3.6 VDDC =5.0 RT=50Ω, f=370MHz VCC3=3.0 to 3.6 VDDC =5.0 RT=50Ω, f=825MHz VCC3=3.0 to 3.6 Non-Adjacent Channel VDDC =5.0 Crosstalk VCC3=3.0 to 3.6 (TMDS Channels) VDDC =5.0 RT=50Ω, f=370MHz Off-Isolation (TMDS Channels) Maximum (2) Throughput Figure 10 Figure 10 Figure 11 RT=50Ω, f=825MHz Figure 11 VCC3=3.3 VDDC =5.0 -30 dB -25 -25 dB -20 1.65 Gbps Control Channels – DDC / CEC tONDDC Turn-On Time; SDDC, /OEDDC to Output VCC3=3.3 VDDC =3.0 to 5.5 VSWDDC=2V, RDDC=1kΩ, CL=5pf 28 ns tOFFDDC Turn-Off Time; SDDC, /OEDDC to Output VCC3=3.3 VDDC =3.0 to 5.5 VSWDDC=2V, RL=1kΩ, CL=5pf 24 ns Note: 2. Guaranteed by characterization, not production tested. © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 www.fairchildsemi.com 6 FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer AC Electrical Characteristics V ON I OZ NC nDm,nCLKm , CECn,HPDn, SCLn, SDAn Dm ,CLK m , CEC,HPD, SCL,SDA A Dm ,CLK m , CEC,HPD, SCL, SDA VSW Select VSW GND I ON Select GND V CNTRLT = 0 or Vcc3 V CNTRLD = 0 or VDDC R ON = V ON / I ON GND V CNTRLT = 0 or Vcc3 V CNTRLD = 0 or VDDC Each switch port is tested separately. Figure 4. On Resistance Figure 5. Off Leakage Vcc3 10mA R PU Generator VSWTMDS VOUT CL GND VCNTRLT GND RPU and CL are functions of the application environment (see AC/DC tables for values of CL and RPU). CL includes test fixture and stray capacitance. Figure 6. TMDS Test Circuit Load nDm ,nCLKm , CECn,HPDn, SCLn,SDAn VDDC RDDC VSWDDC VOUT CL GND VCNTRLD GND RPU and CL are functions of the application environment (see AC/DC tables for values of CL and RDDC). CL includes test fixture and stray capacitance. Figure 7. DDC Test Circuit Load © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 www.fairchildsemi.com 7 FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer Test Diagrams tRISE = 2.5ns tRISE = 2.5ns tFALL = 2.5ns tFALL = 2.5ns VDDC VCC3 90% Input - V CNTRLT GND 90% VCC3 /2 VCC3 /2 10% 10% 90% V VDDC /2 10% GND DDC /2 10% VOH VCC3 Output - VOUT Output- V OUT VCC3 – 0.5 90% Input - VCNTRLD 10% 10% tON VOL VDDC /2 VOL + 0.3 tON tOFF tOFF Figure 8. Turn-on / Turn-off Waveforms Figure 9. DDC Turn-on / Turn-off Waveforms Network Analyzer RS VCNTRLT VIN GND RT VS GND GND V OUT GND GND RT GND Off Isolation = 20 Log (VOUT / VIN ) Figure 10. Channel Off Isolation Network Analyzer NC RS VCNTRLT GND V IN VS GND GND RT GND GND R S and R T are functions of the application environment (see AC/DC tables for values). RT V OUT GND CROSSTALK = 20 Log (VOUT / VIN ) Figure 11. Non-Adjacent Channel-to-Channel Crosstalk © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 www.fairchildsemi.com 8 FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer Test Diagrams Capacitance Meter VSW Capacitance Meter VCNTRLT = 0 or VCC3 VCNTRLD = 0 or VDDC VSW f = 1MHz VCNTRLT = 0 or VCC3 VCNTRLD = 0 or VDDC VSW f = 1MHz Figure 12. Channel Off Capacitance Figure 13. Channel On Capacitance tRISE = 240ps Input Differential Pair +500mV Input - VSWTMDS 1Dn+, 1Dn-, 2Dn+, 2Dn-, 1CLK+, 1CLK-, 20% -500mV 2CLK+, 2CLK-, +500mV Output Differential Pair Dn+, Dn-, CLK+, CLK-, tFALL = 240ps 80% 80% 0V 0V 20% t t Output- VOUT 0V SK1 SK2 = | t pLH - t pHL | = | tpLH/HL max. - tpLH/HL min. | 0V – 500mV tpLH tpHL Figure 14. Intra- and Inter-Pair Skew tpd tRISE = 2.5ns VCC3 VCC3 10mA R PU Input - VCNTRLT 10mA Generator VOUT CL GND VCC3 /2 VCC3 GND Output - VOUT VCNTRLT VOL GND 10% 90% R PU and C L are functions of the application environment (see AC/DC tables for values). C L includes test fixture and stray capacitance. 10% tBBM Figure 15. Break Before Make © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 www.fairchildsemi.com 9 FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer Test Diagrams A 56 51 34 29 1 6 23 28 6.15 7.6 9.125 B 8.10 1.45 4.05 0.2 C B A 0.30 0.50 0.1 C -C- 0.50 0.10 A B C 0.25 MTD56REV3 Figure 16. 56-Pin Thin-Shrink Small Outline Package (TSSOP) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 www.fairchildsemi.com 10 FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer Physical Dimensions FSHMDI08 — Low-Voltage, Wide-Bandwidth, HDMI Switch with DDC and CEC Multiplexer © 2006 Fairchild Semiconductor Corporation FSHDMI08 Rev. 1.0.4 www.fairchildsemi.com 11