8 7 6 5 4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 1 REVISIONS REV D ECN #3306 DATE 5/9/11 DESCRIPTION ENGR E HUSTED KEYING PLUG INSTALLED OPEN TO OUTSIDE 4 PLCS. D D 425.4 16.75 DETAIL A SCALE 1 : 1 DETAIL B SCALE 1 : 1 DEFAULT KEYING POSITION INSTALLED 4 POSITIONS LABELS IN APPROXIMATE LOCATION 416.1 16.38 TYP. C 4.7 .19 TYP. 5.3 .21 TYP. 116.4 4.58 TYP. 33.4 1.32 TYP. 64.8 2.55 56.7 2.23 TYP. 126.5 4.98 4.6 .18 TYP. 74.1 2.92 414.7 16.33 TYP. 80.1 3.16 127.2 5.01 44.5 1.75 15.2 .60 TYP. 126.5 4.98 270.6 10.65 C 6.4 .25 37.3 1.47 144.5 5.69 406.9 16.02 259.5 10.22 TYP. #4-40 TAPPED HOLE THRU TYP. 16 PLCS. 15.7 .617 TYP. 133.4 5.250 3.4 .14 177.3 6.98 TYP. B 81.3 3.20 133.4 5.25 92.2 3.63 TYP. 9.5 .38 20.3 .80 TYP. 92 3.62 M3x0.5 TAPPED HOLE THRU TYP. 40 PLCS. 148.6 5.85 M3x0.5 TAPPED HOLE THRU TYP. 8 PLCS. 257.9 10.15 155.50 6.122 A B B 12 X .18 THRU ALL COUNTERSUNK FOR M4 X 40 ENCLOSURE MOUNTING SCREWS M4X0.7 - 6H .32 TYP. 12 PLCS. 28.2 1.11 TYP. 6.4 .25 A A CUSTOMER DRAWING VIRGINIA PANEL CORPORATION MATREIAL FRAME - ALUMINUM HARDWARE - STAINLESS STEEL WWW.VPC.COM ITA 2100 G20X EXT HT 2. MATING RECEIVER VPC PART NUMBER 310120140 OR 310120126 1. FOR APPLICATION USE AND CARE INFORMATION CONSULT VPC USERS GUIDE @ WWW.VPC.COM DIMENSIONS ARE SHOWN AS: NOTES: 8 7 [MILLIMETERS] INCHES 6 5 4 3 2 SIZE D CAGE CODE SCALE: 18117 NONE DWG.NO. 410120160 410120160 REV D 10/29/08 SHEET 1 OF 1 1