230V INVERTER/CHARGERS ® PowerVerter APS DC-to-AC Inverter/Chargers Reliable alternative power sources for backup, mobile, emergency and remote power applications. Reliable alternative power sources for backup, mobile, emergency and remote powe applications • Reliable alternative power sources for backup, mobile, emergency an remote power applications • Reliable alternative power sources for backup, mobile emergency and remote power applications • Reliable alternative power sources fo backup, mobile, emergency and remote power applications • Reliable alternative powe sources for backup, mobile, emergency and remote power applications • Reliable al ternative power sources for backup, mobile, emergency and remote power application • Reliable alternative power sources for backup, mobile, emergency and remote powe applications • Reliable alternative power sources for backup, mobile, emergency an remote power applications • Reliable alternative power sources for backup, mobile emergency and remote power applications • Reliable alternative power sources fo C O N T E N T S backup, mobile, emergency and remote power applications • Reliable alternative powe Introduction 2–3 sources for backup, mobile, emergency and remote power applications Application Focus 4 – 5• Reliable al Feature Focus 6–7 ternative power sources for backup, mobile, emergency and remote power application Specifications7 • Reliable alternative power sources for backup,Accessories mobile, emergency and 8remote powe N O I N T R O D U C T I O N I N T R O D U C T PowerVerter APS DC-to-AC Inverter/Chargers D Deliver Superior Output O Inverter/Chargers provide stable output voltage to protect your R equipment and help it perform at its peak. When the AC power source T generates voltages too high or too low for safe operation, the Inverter/ N Charger acts as an intermediary, correcting unsafe voltage levels I U C T I INTRODUCTION before AC power reaches your equipment. Models with automatic N voltage regulation are able to correct voltages without switching to APSX1012SW / APSX2012SW O APSX750 / APSX1250 battery, preserving battery backup runtime and reducing battery wear. Clean, Safe Power Out T 1 400 – 12 000 Watts Peak Power Automatic Transfer from AC Source to Reliable Battery Backup Power Protection Against Blackouts, Surges, Line Noise & Unsafe Voltages Fast & Safe 3-Stage Battery Charger Inverter/Chargers also correct output frequency, allowing sensitive equipment such as computers and electronics to operate without malfunction. When Inverter/Chargers operate from battery power, the Provide Reliable Backup Power equipment with clean, safe, reliable power at all times. Inverter/Chargers provide mobile power and backup power for generators Manage from Anywhere AC output is strictly controlled by a microprocessor to provide your and other AC power sources. They are especially useful in areas where the utility power grid is unreliable or unavailable. Tripp Lite’s ASPX6048VRNET Inverter/Charger now includes network AC power before passing it to your equipment and simultaneously remotely monitor and control your Inverter/Charger via Web browser, charges your user-supplied batteries. Built-in battery backup, surge Network Management System, SNMP, telnet or SSH. In combination suppression, noise filtering and regulated output voltage protect your with Tripp Lite’s FREE PowerAlert equipment, your data and your productivity. software, this feature lets you monitor your Inverter/Charger’s while driving or when your generator is turned off), the Inverter/ operating conditions and control Charger automatically switches to battery power and your equipment it at the touch of a button, even continues to operate without interruption. If an AC source becomes when you’re nowhere near the O available, the Inverter/Charger automatically switches back to worksite, giving you full power passing AC power to your equipment and recharges your batteries. management ability. PowerAlert Software Inverter/Charger Operation—AC Source Available Inverter/Charger Operation—AC Source Unavailable AC AC AC AC AC AC I N T R O D U C T N I •If an AC source is not available (during power failures, at remote sites, I N O D SNMP/Web management module (model SNMPWEBSOLOHV), you can R manageability features. With the addition of an optional, external •When an AC source is available, the Inverter/Charger conditions T U C T I O Inverter/Chargers provide clean, safe, reliable power to your equipment, even when the AC source is unsafe, unreliable or unavailable. Network Manageable Model Available N I N T R O D U 700 – 6 000 Watts Continuous Power C I Dirty, Dangerous Power In 2 DC DC When an AC power source is available, Inverter/Chargers condition power before it reaches your equipment and simultaneously charge your batteries. DC DC BATTERY BA BAT B A TERY AT Y BATTERY When an AC power source is not available, Inverter/Chargers automatically switch to battery backup, converting stored DC power to regulated AC power. I O N N T R O D U C T I O N I N T R O D U C T I Handle Peak Power Requirements Many tools, appliances and printers require brief bursts of power that exceed their continuous wattage ratings, either at startup, during use or both. Inverter/Chargers temporarily provide extra output power to handle these “peak surge” demands without shutting down. The DoubleBoost™ feature delivers up to 200% output for up to 10 seconds, and the OverPower™ feature delivers up to 150% output for up to 60 minutes. By providing ample reserve power to support heavy-duty startup and usage demands, Inverter/Chargers can support a much wider range of equipment and applications. Peak Power Requirements DoubleBoost Output Startup Peak OverPower Output Usage Peak WATTS I Continuous Output Equipment Load TIME Inverter/Chargers can handle your equipment’s peak power requirements without shutting down. Preserve Your Batteries 3-Stage Charging An advanced 3-stage charger recharges your batteries faster than conventional chargers, while protecting batteries against over-charge and over-discharge. A charge conservation setting preserves battery power by automatically shutting off the inverter in the absence of any power demand from connected equipment. When in use, all models operate with high efficiency, extending battery backup runtime. Runtime is also determined by the number and size of user-supplied batteries connected to the Inverter/Charger. Since you can connect as many batteries as you want, runtime can be tailored to match any application. Online Selector Guide Find the perfect Inverter/Charger or Inverter for your application! Go to www.tripplite.com/selectors and use Tripp Lite’s dynamic Selector Guide to choose the features you want and see matches instantly! Inverter/Chargers recharge batteries faster and protect them against over-charge and over-discharge. O N Cleaner, Greener Backup Power: Better for You, Your Equipment & the Environment Quiet, Fume-Free Operation: With no fumes, fuel or excess noise, Inverter/Chargers are better for applications where generators would be hazardous (such as indoors or inside a vehicle) or too loud (such as residential areas or outdoor areas during quiet hours). They’re also ideal for backing up generators with a more reliable source of power for uninterrupted equipment operation. Fewer Trips to the Pump: Inverter/Chargers consume no fuel, drawing power from your AC source and battery system instead. Generators require frequent, costly trips to the pump. Inverter/ Chargers can also store power while your generator is running, allowing you to turn it off to conserve fuel without turning off your equipment. Safer Power: Inverter/Chargers produce stable, microprocessorcontrolled voltage and frequency to help your equipment perform at its peak. Generators can compromise the reliability of your equipment by producing overvoltages, frequency variations and surges. Using an Inverter/Charger between the generator and your equipment conditions the generator output to keep your equipment safe. Less Maintenance: Inverter/Chargers provide years of worryfree operation without requiring maintenance. Generators require frequent maintenance and parts replacement, increasing expense and waste. RoHS Compliance: Inverter/Chargers protect the environment by restricting six hazardous substances during manufacture: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ether. 3 A P P L I C A T I O N F O C U S A P S O •To avoid overloads, the total wattage of connected equipment must be lower than the continuous wattage rating of the Inverter/Charger. Equipment wattages are often listed on nameplates or in manuals. If your equipment is rated in amps, multiply by the AC voltage to estimate wattage. (Example: 1,3 amps × 230 volts = 300 watts.) INVERTER/CHARGER COMPATIBILITY MATRIX •If your AC source suffers from frequent voltage fluctuations, consider models with automatic voltage regulation (AVR). AVR corrects voltages without draining battery power, preserving runtime and reducing battery wear. AVR is very useful for conditioning generator sources. (Applicable models: APSINT3636VR, APSX3024SW and APSX6048VRNET.) •If you are powering computers, network equipment or other sensitive electronics, consider models with fast transfer times (from AC source to battery) and pure sine wave output for maximum compatibility.* (Applicable models: APSX3024SW, APSX6048VRNET and HCRK-INT have fast transfer times and pure sine wave output. APSX750 and APSX1250 have fast transfer times and simulated sine wave output.) * Some loads require pure sine wave output for proper operation, such as automated teller machines (ATMs), compact fluorescent lights, fans and electronics with PFC-corrected, switched-mode power supplies, including many computers and LCD monitors. Use APSX3024SW, APSX6048VRNET or HCRK-INT for these loads. Consult the product manual or contact the manufacturer for more information about backup power requirements for your equipment. F Select a battery or battery system that will provide the Inverter/Charger with the correct DC voltage and an Amp-Hour capacity that provides adequate runtime for your application. Example Wattage Requirement Blender 320W LCD Television Laptop Computer A P P L I C A T I O N F O C U S A P P L I T I A STEP 1) Determine Total Wattage Requirement: After finding the wattage ratings of the equipment that you will connect to the Inverter/ Charger, add them together. C O How to Choose Batteries N O C U S A P P L I C A T 4 + 120W + 100W = 540W STEP 2) Determine DC Amps Required: Divide the total wattage required (from Step 1) by the battery system voltage to determine the DC amps required. 540W ÷ 12V = 45 DC Amps STEP 3) Estimate Battery Amp-Hour Capacity Required: Multiply the DC amps required (from Step 2) by the runtime required—the estimated number of hours you need to operate your equipment before recharging your batteries. Multiply this number by 1,2 to allow for inefficiency. This will give you a rough estimate of how many Amp‑Hours of battery capacity you need. Note: Runtime varies with load characteristics, temperature, battery condition and other factors. 45 DC Amps × 2 Hours Runtime × 1,2 Inefficiency = 108 Amp-Hours STEP 4) Estimate Battery Recharge Time: Divide the battery capacity (from Step 3) by the Inverter/Charger’s charger capacity to estimate the time required to recharge your batteries completely. 108 Amp-Hours ÷ 30 Amps Charger Capacity = 3,6 Hours Recharge Time Power Tools Battery Charger Bench Grinder * Chain Saw (36 to 41 cm) Circular Saw Disk Grinder Drill (6 mm) Drill (10 mm) Drill (13 mm) Finishing Sander Heat Gun Hedge Trimmer Jigsaw Reciprocating Saw Router Table Saw Weed Trimmer Wet/Dry Vacuum (38 liters) Pumps 1/6 hp Pump * 1/4 hp Pump * 1/3 hp Pump * Audio/Video Equipment Cable/Satellite Receiver DVD Player/VCR Video Game Console Plasma TV (107 to 127 cm) LCD TV (33 to 48 cm) LCD TV (64 to 91 cm) LCD TV (107 to 152 cm) Office Equipment Computer & Monitor Fax Machine Ink Jet Printer Laptop Laser Printer (portable) Monitor Small Appliances Blender Can Opener Coffee Maker (2,4 liters) Electric Barbecue Grill Electric Fry Pan Food Processor Microwaves Microwave Microwave Microwave Microwave Portable Vacuum Refrigerator * Toaster Oven APSX6048VRNET APSX3024SW APSINT3636VR APSINT2424 APSX2012SW APSINT2012 Typical Wattage ** APSX1250 Equipment APSX1012SW Inverter/Charger Model APSX750 I O N How to Choose an Inverter/Charger F C U APPLICATION FOCUS 100–200 240–1 000 1 200–1 600 800–1 000 600 250 500 750 200–225 500–1 500 500 450–600 450–600 500–1 800 1 000–1 200 500 1 000 800/1 200 900/1 300 1 050/1 600 50 50 10–200 400 50–100 120–135 200–250 250 150 100 75–150 350 80–125 200–400 200 800–1 200 1 400 1 200 400 Size Inverter/Charger 250W higher than cooking power wattage (shown). 600 1 000 1 500 2 000 800 600 1 200 * Equipment may require 3-4 times the listed wattage for startup due to inductive motors. ** Wattage varies with equipment, application and other factors. Consult the equipment manual, nameplate or manufacturer for wattage requirements. For multiple devices operating simultaneously, add the wattage requirements and make sure the total does not exceed the Inverter/Charger’s continuous output rating. P L I C C A T I O N F O C U S A P P L I C A T I O N F O C U S A P P L I C A T I O N Reliable Backup Power for All Business & Residential Applications • Areas without Reliable Power • Generator Backup • Computers & Networking • Telecommunications • Retail/Commerce • Remote Job Sites • Security & Alarm Systems • Healthcare • Emergency & Service Vehicles • Renewable Energy • Severe Weather Areas without Reliable Power Generator Backup In areas with limited or unreliable access to on-grid power sources, Inverter/Chargers store power to be used when the on-grid source is unavailable. They also make irregular utility power and generator output safer for your equipment. Inverter/Chargers provide reliable battery backup power when generators break down or run out of fuel. They also act as intermediaries, providing surge suppression, line noise filtering, voltage correction and frequency regulation to make generator output safer and more compatible with your equipment. Computers & Networking Inverter/Chargers function as UPS systems, providing surge suppression, line noise filtering, voltage correction, frequency regulation and battery backup power. They also convert generator output to computer-grade power safe for use with computers, network equipment and other sensitive electronics. Models with faster transfer times and pure sine wave output are ideal for maximum compatibility and system availability. Telecommunications Inverter/Chargers provide reliable backup power for telecommunications equipment in remote GSM network sites, VoIP systems and traditional PBX systems. They also make irregular utility power and generator output safer for your sensitive telecom equipment. Models with faster transfer times and pure sine wave output are ideal for maximum compatibility and system availability. Retail / Commerce Remote Job Sites Inverter/Chargers support point-of-sale equipment, ATMs, kiosks and back-office systems, keeping retail locations productive, avoiding lost sales and protecting important data. In remote sites using generators, Inverter/Chargers make generator power safer for your equipment and provide reliable backup AC power when generators break down or run out of fuel. In sites using solar panels and other renewable AC sources, Inverter/Chargers store power for use at night or during other non-generational periods to keep equipment operating around the clock. Security & Alarm Systems Inverter/Chargers provide reliable backup power to security systems, cameras and alarms, ensuring continued functionality during blackouts and other power problems. Healthcare Inverter/Chargers provide mobile backup power for vital equipment in ambulances and other emergency and service vehicles, keeping them fully operational in any location. Tripp Lite’s Medical-Grade Inverter/ Charger provides IEC 60601-1 compliance, an isolation transformer and automatic battery backup for medical carts and other equipment in hospitals, ambulances, laboratories, clinics, pharmacies, elder-care facilities and other medical settings—including patient care areas. Renewable Energy Severe Weather Inverter/Chargers store power generated by solar panels, wind turbines and other renewable energy systems, ensuring that backup power will be available during non-generational periods such as nighttime hours. During power outages caused by severe weather, Inverter/Chargers provide reliable battery backup power, make generator power safer for your equipment and allow you to run generators less often to conserve fuel during extended outages. Emergency & Service Vehicles 5 F E A T U R E F O C U S F E A T U R E F S A AC Outlets or Hardwire AC Output Terminals E S U C O F The LEDs indicate the approximate charge level—High/ Medium/Low—of connected batteries. E R U A T E F S U C E Remote Control Jack E R U A T E F I Configuration DIP Switches J Resettable Circuit Breakers Use the DIP switches to change the Inverter/Charger’s settings and optimize operation for your application. K Durable Polycarbonate or Metal Case L Integrated Mounting Feet/Flanges M Cooling Fan APSX750 125A APSX1012SW 200A 200A Recommended DC Wire Size (90° C Rated) Maximum DC Wire Length (Battery to Unit) 25 mm² (4 AWG) 35 mm² (2 AWG) 60 mm² (1/0 AWG) 35 mm² (2 AWG) 60 mm² (1/0 AWG) 60 mm² (1/0 AWG) 70 mm² (2/0 AWG) 4,8 m 7,9 m 12,8 m 6,1 m 9,4 m 7,6 m 9,4 m O APSX1250 APSINT2012 250A 70 mm² (2/0 AWG) 6,1 m 400A 90A APSINT3636VR 175A 2 x 125A 2 x 125A 70 mm² (2/0 AWG) 60 mm² (1/0 AWG) 70 mm² (2/0 AWG) 60 mm² (1/0 AWG) 70 mm² (2/0 AWG) 70 mm² (2/0 AWG) 70 mm² (2/0 AWG) 6,1 m 15,8 m 19,8 m 23,7 m 29,8 m 15,8 m 32 m 125A 25 mm² (4 AWG) 4,8 m R APSX3024SW APSX6048VRNET U PVX700 S Remote Generator Controller The remote generator controller automatically starts or stops your generator to keep your batteries at an optimal charge level. (Included with APSX3024SW and APSX6048VRNET only. A user-supplied cable is required.) T Network Communication Connector U 12V DC Connector The 12V DC Connector provides power for an external SNMP/Web Recommended DC Fuses and Wiring Recommended DC Fuse The connector allows for the connection of a battery temperature sensor, which increases the operational lifespan of your batteries by adjusting the charging level based on battery temperature. (Included with APSX1012SW, APSX2012SW, APSX3024SW and APSX6048VRNET. Models APSX1012SW and APSX2012SW require user-supplied cabling.) This RS-232 serial port allows attachment of an external SNMP/ Web management module (model SNMPWEBSOLOHV) to remotely monitor and control your Inverter/Charger via SNMP, Web, SSH or telnet. (Included with APSX6048VRNET only.) (Inverter model PVINT375 includes a replaceable fuse.) F C R Remote Battery Temperature Connector Connect the inlet or terminals to your AC power source to charge connected batteries and pass conditioned AC power to your equipment when available. Model Inverter/Charger models with a fast transfer time (½ cycle) are better for supporting computers and network equipment. The fast transfer time ensures that sensitive electronic equipment loads will not be dropped when switching from the AC source to battery power during a power failure. (Included with all Inverter/Charger models except APSINT2012, APSINT2424 and APSINT3636VR.) The terminals connect to your batteries with user-supplied cabling. (Inverter model PVINT375 includes an input plug that connects to your vehicle’s lighter or accessory outlet.) U S Battery Conservation Dial The dial sets the load level at which the inverter shuts off to conserve battery power. (Included with all models except APSX750, APSX1012SW, APSX1250 and APSX2012SW.) APSX2012SW APSINT2424 E Select Inverter/Charger models include pure sine wave output from battery, making them ideal for supporting the most sensitive electronic equipment, including servers, networking and telecommunications equipment. (Included with APSX1012SW, APSX2012SW, APSX3024SW, APSX6048VRNET and HCRK-INT.) Q Fast Transfer Time from AC Source to Battery Connect the jack to an optional Remote Control Module (model APSRM4 or APSRMSW, sold separately) to enable remote monitoring and control. H AC Inlet or Hardwire Terminals A T P Pure Sine Wave Output G DC Input Terminals F O Select Inverter/Charger models can correct abnormal voltages without draining battery power, making them ideal for supporting equipment powered by generators and other AC sources that experience frequent voltage fluctuations. (Included with APSX3024SW, APSINT3636VR and APSX6048VRNET only. APSINT3636VR also includes voltage regulation LEDs.) The LEDs indicate whether the Inverter/Charger is supplying power from an AC source or from your batteries. They also indicate whether the connected equipment load exceeds the continuous output rating of the Inverter/Charger. F E O Automatic Voltage Regulation C Battery Level LEDs (Inverter/Charger models APSX1012SW and APSX2012SW may require specialized grounding procedures.) Most Inverter/Charger models have an operating mode switch with three settings: “Auto”, “Charge Only” and “Off.” Inverters, and some Inverter/Chargers, have an On/Off switch. D Operation LEDs F B Operating Mode Switch 6 N Grounding Lug Connect the outlets or terminals to your compatible equipment, outlet strip, power distribution unit or electrical panel. F A T U R E F O C U FEATURE FOCUS Note: Acceptable power is directly related to cable length—shorter cables yield better performance. Tighten the Inverter/ Charger battery terminals to approximately 3,5 Newton-meters of torque to create an efficient connection and avoid excessive heating. The battery system wiring should also incorporate an approved fuse block and fuse (as noted above) within 460 mm of the battery. The Inverter/Charger should be connected to earth or chassis ground with a minimum 10 mm² (8 AWG) wire. If the Inverter/Charger will be used in an area with harsh power conditions, Tripp Lite recommends placing a surge suppressor between the Inverter/Charger and the AC source. Contact Tripp Lite for a full line of 230V surge suppressors. These recommendations are presented as guidelines only. All wiring must be performed in accordance with NEC or your local electrical code, as determined by applicable local laws. Consult the product manual for more information about proper installation of the Inverter/Charger. management module (model SNMPWEBSOLOHV) directly from the unit, eliminating the need for nearby AC outlets. (Included with APSX6048VRNET only. Cable included with SNMPWEBSOLOHV.) Low Battery Alarm (internal, not shown) Automatically detects low battery voltage and shuts down the inverter to prevent battery depletion/damage. (Included with all models.) Overload Alarm (internal, not shown) Automatically detects output overloads and shuts down the inverter to prevent damage. (Included with all Inverter/Charger models.) PowerVerter DC-to-AC Inverters Inverters provide mobile AC power derived from your vehicle’s battery. They do not include a battery charger. B K M J A G G K M A PVINT375 L B PVX700 O C U S S F E A T U R E F O C U S F E A T U R E F O C U S F E A T U R E F O C U S PowerVerter APS DC-to-AC Inverter/Chargers O I C E R S D H A M L C E D O F B J K I B D C K F G M B P Q T U M P H A G APSINT3636VR N L APSX6048VRNET Similar Model: APSX3024SW J A M H G I R E Q APSX1012SW Similar Model: APSX2012SW K L Medical-Grade Inverter/Charger Pure Sine Wave Output Durable Metal Case Internal Isolation Transformer Mounting Hardware Kit Remote User Interface UserReplaceable Battery Module PowerAlert Data-Saving Software C14 Inlet Fan Fast Transfer Time HCRK-INT C13 Outlet IEC 60601-1 • IEC 62040 USB Port SPECIFICATIONS Continuous Peak Nominal Nominal Battery Transfer Unit Output AC AC Output Voltage/ DC Voltage Nominal AC Input AC Input Charger Time (AC to Output Dimensions Shipping Model Rating (A) Rating (B) Outlets Frequency (Range) Voltage/Frequency Connector Capacity Battery) (G) (H x W x D) Weight PowerVerter APS Inverter/Chargers 750W 1500W 230V / 50Hz 12V (10-15V) 230V / 50Hz ½ cycle 178 x 222 x 229 mm 9,1 kg APSX750 2 C13 (C) C14 Inlet (F) 20A or 5A (E) 1250W 2500W 230V / 50Hz 12V (10-15V) 230V / 50Hz ½ cycle 178 x 222 x 229 mm 11,8 kg APSX1250 2 C13 (C) C14 Inlet (F) 30A or 7,5A (E) 2000W 4000W Hardwire 230V / 50Hz 12V (10-15V) 230V / 50Hz Hardwire 60A or 15A (E) 1 cycle 178 x 216 x 356 mm 20,9 kg APSINT2012 2400W 4800W Hardwire 230V / 50Hz 24V (20-30V) 230V / 50Hz Hardwire 30A 1 cycle 184 x 216 x 413 mm 19,5 kg APSINT2424 3600W 7200W Hardwire 230V / 50Hz 36V (30-45V) 230V / 50Hz Hardwire 30A 1 cycle 178 x 216 x 356 mm 28,6 kg APSINT3636VR PowerVerter APS Inverter/Chargers with Pure Sine Wave Output 1000W 2000W Hardwire 230V / 50Hz or 60Hz (E) 12V (10-15V) 230V / 50Hz or 60Hz (E) Hardwire 4A to 40A(E) ½ cycle 184 x 229 x 457 mm 16,5 kg APSX1012SW 2000W 4000W Hardwire 230V / 50Hz or 60Hz (E) 12V (10-15V) 230V / 50Hz or 60Hz (E) Hardwire 6A to 60A(E) ½ cycle 191 x 229 x 572 mm 25,3 kg APSX2012SW 3000W 6000W Hardwire 230V / 50Hz or 60Hz (E) 24V (20-30V) 230V / 50Hz or 60Hz (E) Hardwire 90A or 22,5A (E) ½ or 1 cycle (E) 256 x 226 x 315 mm 39,5 kg APSX3024SW 208V or 230V / 48V (42-60V) 208V or 230V / Hardwire 90A or 22,5A (E) ½ or 1 cycle (E) 256 x 228 x 494 mm 59,5 kg APSX6048VRNET 6000W 12000W Hardwire 50Hz or 60Hz (E) 50Hz or 60Hz (E) Medical-Grade Inverter/Charger (Complies with IEC 60601-1 and IEC 62040. Includes Isolation Transformer, 90 Amp-Hour Battery Module, Remote, USB Port and Pure Sine Wave Output.) 230V / 50Hz 12V (10-15V) 230V / 50Hz 12A ¼ cycle 300W 750W 89 x 152 x 292 mm (H) 7,3 kg (H) C14 Inlet (F) HCRK-INT 1 C13 178 x 216 x 368 mm (I) 30,4 kg (I) PowerVerter Inverters (Inverters provide mobile AC power derived from your vehicle’s battery. They do not include a battery charger.) 230V / 50Hz 12V (10-15V) N/A N/A N/A N/A 51 x 108 x 197 mm 1,1 kg 375W 600W 1 Universal (D) PVINT375 230V / 50Hz 12V (10-15V) N/A N/A N/A N/A 70 x 126 x 208 mm 2,5 kg 700W 1400W 1 Universal (D) PVX700 (A) Maximum output power available only when connected batteries are properly charged. (B) Peak output level and duration varies with model, battery condition, charge level, ambient temperature and other factors. Peak output duration for Inverter models is instantaneous. (C) Includes an adapter that converts a C13 outlet to a universal outlet compatible with more than 20 plug types, including most household plugs worldwide. (D) Compatible with more than 20 plug types, including most household plugs worldwide. (E) User-selectable. (F) C14 inlet connects to user-supplied input power cord with a region-specific plug. APSX750 and APSX1250 include a detachable 2-meter C13-to-C14 power cord. (G) 1/2 cycle = 10 milliseconds at 50Hz (nominal). 1 cycle = 20 milliseconds at 50Hz (nominal). (H) Power module. (I) Battery module. For additional product specifications and the most recent updates, go to www.tripplite.com. 7 A C C E S S O R I E S ACCESSORIES A C C E S S O R I E S A C C E S S O R I Remote Control Modules The optional Remote Control Modules provide complete remote monitoring and control up to 15,2 m away. They include all the required cabling and can be mounted on, above or below any stable surface. Depending on the model, LEDs indicate operating mode, charging status, inverter condition, battery charge and load level. APSRM4 APSRMSW 12V Maintenance-Free Battery A C C E S S O R I E S The Maintenance-Free Battery is designed for use with all Inverter/Chargers. (24V, 36V and 48V Inverter/Chargers require multiple batteries installed in parallel for voltage compatibility.) The Maintenance-Free Battery can be used with the optional Battery Housing (BP-260), which holds two batteries. The Maintenance-Free Battery has a capacity of 75 AmpHours, enough to power a full-featured laptop computer for approximately 7,5 hours. 98-121 Battery Case The Battery Case’s sturdy metal cabinet can hold two 98-121 batteries. It includes heavy-gauge cabling, connectors and battery terminal isolators for user installation. SNMP/Web Management Module BP-260 A C C E S S O R I E S A C C E S S O R I E S A C C E S S O R I E S This external SNMP/Web management module allows you to remotely monitor and control your Inverter/Charger via SNMP, Web, SSH or telnet. Inverter/Chargers can also be controlled and monitored through Tripp Lite’s FREE PowerAlert software. SNMPWEBSOLOHV SPECIFICATIONS Model Description Remote Control Module Remote Control Module, Faceplate and Cord. APSRM4 Remote Control Module, Faceplate and Cord. (For models APSX1012SW and APSX2012SW only.) APSRMSW 12V Maintenance-Free Battery 12V DC, 75 Amp-Hour Maintenance-Free Battery. 98-121 Battery Case Battery Case with Cabling and Hardware. BP-260 SNMP/Web Management Module SNMPWEBSOLOHV SNMP/Web Management Module for APSX6048VRNET. Unit Dimensions (H x W x D) Shipping Weight 32 x 102 x 57 mm* 98 x 48 x 22 mm ,2 kg ,45 kg 203 x 304 x 254 mm 27 kg 356 x 514 x 375 mm 7,7 kg 32 x 76 x 152 mm ,82 kg * Dimensions listed are for the remote module only, without the faceplate. Faceplate dimensions are 95 x 146 mm (H x W). Online Selector Guide Find the perfect Inverter/Charger or Inverter for your application! Go to www.tripplite.com/selectors and use Tripp Lite’s dynamic Selector Guide to choose the features you want and see matches instantly! ABOUT TRIPP LITE Since 1922, Tripp Lite has established a global reputation for quality manufacturing, superior value and excellent service. Tripp Lite makes more than 2,500 products to power, protect and connect electronic equipment, including UPS systems, replacement batteries, power distribution units, rack systems, cooling solutions, surge suppressors, KVM switches, cables, laptop accessories, power strips and inverters. Learn more at www.tripplite.com. Distributed By: TRIPP LITE WORLD HEADQUARTERS 1111 W. 35th Street, Chicago, IL 60609 USA +1.773.869.1212 • www.tripplite.com TRIPP LITE AMÉRICA LATINA (MIAMI) +1.305.406.2523 • [email protected] TRIPP LITE MIDDLE EAST (DUBAI) +971.4.887.1633 • [email protected] Copyright © 2012 Tripp Lite. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from actual products. TRIPP LITE RUSSIA (MOSCOW) +7.495.799.5607 • [email protected] TRIPP LITE UNITED KINGDOM +44.12.7651.6838 • [email protected] 201111171 95-3081 E S