DC/DC Converters TOS Series, Point-of-Load (POL) Converter Features Small size, low profile SMT package or SIP version Cost-efficient open frame design Wide input voltage ranges Output voltages trim from 0.75 VDC to 5.5 VDC Delivers up to 30 A with minimal derating Ultra high efficiency to 96 % Fast transient response Remote On/Off control Wide temperature range –40°C to +85°C SMT package fully DOSA compatible Lead free design – RoHS compliant Models Order code The TOS series is a range of high performance non-isolated dc-dc converters With very high efficiency that can supply up to 30A of output current. These modules provide precisely regulated output voltages which can be set via an external resistor to a value from 0.75 VDC to 5.5 VDC. These converters work over a wide input voltage range of 2.4 to 5.5 VDC or 8.3 to 14.0 VDC.Further features include remote On/Off, under voltage lockout, over temperature and over current protection. These products have an open-frame construction with very small footprint and are available in an industry standard SIP or in a SMT package. The TOS series is fully RoHS compliant and can withstand industry standard handling, cleaning and the high temperatures of lead-free reflow solder processes. Input voltage range SMT-version TOS 06-05SM TOS 10-05SM TOS 16-05SM TOS 06-12SM TOS 10-12SM TOS 16-12SM Output voltage range 2.4 – 5.5 VDC 0.75 – 3.3 VDC** 8.3 – 14.0 VDC Output current max. Efficiency typ. 6A 94 % 10 A 93 % 16 A 95 % 6A 89 % 10 A 93 % 16 A 92 % 6A 94 % 0.75 – 5.0 VDC SIL-version TOS 06-05SIL TOS 10-05SIL 10 A 93 % TOS 16-05SIL 16 A 95 % TOS 06-12SIL 6A 89 % 10 A 93 % 16 A 92 % TOS 10-12SIL TOS 16-12SIL Models Order code SMT-version TOS 30-05SM TOS 30-12SM 2.4 – 5.5 VDC 8.3 – 14 VDC 0.75 – 3.3 VDC* 0.75 – 5.0 VDC Datasheet for 30A Models see: www.tracopower.com/products/tos30.pdf Input voltage Output voltage Output current max. Efficiency typ. range range 0.80 – 3.6 VDC 30 A 93 % 4.5 – 5.5 VDC 6.0 – 14.0 VDC 0.80 – 3.6 VDC 30 A*** 92 % 4.5 – 5.5 VDC 0.80 – 5.5 VDC 30 A 93 % 6.0 – 14.0 VDC 0.80 – 5.5 VDC 30 A* 92 % SIL-version TOS 30-05SIL TOS 30-12SIL * 25 A output voltage higher than 2.75 VDC ** Max output voltage to be adjusted min. 0.5 VDC below impressed input voltage *** 20 A output voltage higher than 2.75 VDC http://www.tracopower.com Page 1 of 4 DC/DC Converters TOS Series, POL Converter Input Specifications Input current no load – Vin 5 VDC (at Vout min./Vout max.) 6 10 A / 16 – Vin 12 VDC (at Vout min./Vout max.) 6 10 16 Stand by input current (at remote Off) Max. input current – Vin 5 VDC – Vin 12 VDC Start up voltage / under voltage lockout A A A A A models: models: models: models: models: 20 mA / 45 mA typ. 100 mA / 130 mA typ. 17 mA / 100 mA typ. 40 mA / 100 mA typ. 40 mA / 100 mA typ. 6 A models: 1 mA typ. 10 A / 16 A models: 2 mA typ. 6 10 16 6 10 16 A A A A A A models: models: models: models: models: models: 6A 10 A 16 A 4.5 A 7A 10 A 5 Vin models: 2.2 VDC / 2.0 VDC typ. 12 Vin models: 7.9 VDC / 7.8 VDC typ. Start up time (power / remote On till Vout set) 8 mS typ. Reflected ripple current – Vin 5 VDC (with input filter) – Vin 12 VDC 6 10 A / 16 6 10 16 A A A A A models: models: models: models: models: 35 mA typ. 100 mA typ. 30 mA typ. 20 mA typ. 20 mA typ. Input filter external (recommended) 2 x 150 µF low ESR polymer capacitors and 2 x 47 µF ceramic capacitors Output Specifications Voltage set accuracy ±2 % max. (see page 3 for set up) Voltage balance (dual output models) ±1 % max. Regulation – Input variation ±0.3 % max. – Load variation 0 – 100 % ±0.4 % max. Dynamic load response – 50 % load change (upper half) with external 1 µF ceramic- and 10 µF tantalum capacitors max. peak variation / response time Vin 5 VDC, 6 A models: 130 mV / 60 µS typ. Vin 12 VDC, 6 A models: 200 mV / 35 µS typ. Vin 5 VDC, 10 A models: 200 mV / 25 µS typ. Vin 12 VDC, 10 A models: 200 mV / 25 µS typ. Vin 5 VDC, 16 A models: 300 mV / 25 µS typ. Vin 12 VDC, 16 A models: 200 mV / 25 µS typ. – 50 % load change (upper half) with external 2 x 150 µF polymer capacitors Vin 5 VDC, 6 A models: 50 mV / 100 µS typ. Vin 12 VDC, 6 A models: 50 mV / 50 µS typ. Vin 5 VDC, 10 A models: 100 mV / 100 µS typ. Vin 12 VDC, 10 A models: 100 mV / 25 µS typ. Vin 5 VDC, 16 A models: 150 mV / 100 µS typ. Vin 12 VDC, 16 A models: 100 mV / 50 µS typ. Ripple and noise (20 MHz Bandwidth) 5 Vin models: 50 mV pk-pk max. 12 Vin models: 75 mV pk-pk max Temperature coefficient ±0.4 % typ. Over current protection at +200 % of Iout max. typ. Short circuit protection indefinite, automatic recovery Capacitive load – ESR <1 mOhm 1000 µF max. – ESR <10 mOhm 6 A models: 3000 µF max. 10 A / 16 A models: 5000 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TOS Series, POL Converter General Specifications Temperature ranges – Operating –40°C to +85°C – Storage –55°C to +125°C Derating see application note Over temperature protection at +125°C typ. Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (Bellcore TR-NWT-000332) 6 A models: >20 mio. h at +40°C 10 A / 16 A models: >14 mio. h at +40°C Switching frequency 300 kHz typ. (pulse width modulation - PWM) Remote On/Off On: 1 VDC to Vin max. or open circuit. (reference to GND) Off: 0 to 0.3 VDC Physical Specifications Weight 6 A models: 2.8 g 10 A / 16 A models: 6.0 g Soldering profile – SIL - Version – SMT - Version max. 265°C / 10 sec. (wave soldering) peak temp. 245°C for 10 sec. max., 217°C for 90 sec. max. (Convection reflow solder process is recommended) Application note: www.tracopower.com/products/tos-application.pdf Output Voltage Adjustment Vo (+Vout) Prog 5 VDC input models: Rd [Ohm] = 21070 – 5110 Vo – 0.7525 12 VDC input models: Rd [Ohm] = 10570 – 1000 Vo – 0.7525 Load Rd GND All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TOS Series, POL Converter Outline Dimensions mm (inches) Single-in-Line (SIL-Version) 6 A output Models Prog GND Vin On/Off 10.2 (0.40) 3.29 (0.13) Vout 22.9 (0.90) 6.65 (0.26) 1.28 0.51 (0.05) (0.02) 0.64 2.54 (0.1) 0.70 (0.025) 15.24 (0.6) (0.028) 17.78 (0.7) 20.32 (0.8) 10A & 16A output models Vout Vout Sens GND GND Vin Vin No Pin Prog On/Off 12.7 (0.50) (0.128) 3.24 Vout 50.8 (2.00) 8.28 (0.33) 1.28 0.51 0.64 (0.05) (0.02) (0.025) 25.4 (1.0) 5 x 2.54 (5 x 0.10) 1.18 (0.046) 4 x 2.54 (4 x 0.10) Surface Mount (SMT-Version) Prog Vout Bottom View 1.57 (0.82) 1.57 1.5 On/Off Vin (0.82) 4.57 (0.18) 11.4 (0.45) 8.9 (0.35) GND 4.06 (0.16) (0.06) 4.06 (0.16) 8.64 (0.34) 6 A output Models 1.3 2.29 (0.09) 17.52 (0.69) (0.05) 20.3 (0.8) 5.97 (0.24) 10A & 16A output models Prog 8.28 (0.33) 1.57 (0.82) 1.57 Sens Bottom View On/Off Vin (0.82) 7.54 (0.30) 10.29 (0.41) Vout 4.83 (0.19) 1.3 2.84 (0.112) 13.5 (0.53) GND 4.83 (0.19) 1.9 10.92 (0.43) No Pin 4.83 (0.19) (0.075) 4.83 (0.19) 29.9 (1.18) (0.05) 33.0 (1.3) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. January 13. 2015 Page 4 of 4