AC/DC Power Modules TPM Series, 5 to 40 Watt prepared Features ◆ PCB mounting with solder pins or chassis ◆ Single-, dual- and triple output models ◆ Universal input 85 – 264 VAC, 40 – 440 Hz ◆ EMI meets EN 55022, Class B and nd e m m o ec mounting with screw terminals not r ew rn ed fo n desig in FCC, Level B ◆ Low ripple and noise ◆ Over temperature protection ◆ Short circuit and overload protection ◆ Safety class II product ◆ 3-year product warranty The TPM series switching power supplies, comprising 57 (!) standard models, offer high power density in a fully encapsulated plastic case. This feature makes these modules an ideal solution for all space critical applications in commercial and industrial electronic equipment. Full compliance to European low voltage and EMC directive, UL and cUL safety approval qualifies this product for worldwide markets. SMD-technology and an extensive production quality test guarantees a high reliability of these power modules. Models Order code PCB-mounting Chassis mounting with solder pins with screw terminals Output power Output 1 Output 3 max. TPM 05105 5 VDC / 1000 mA TPM 05112 12 VDC / 420 mA TPM 05124 Output 2 5 Watt 24 VDC / 210 mA TPM 05212 +12 VDC / 250 mA –12 VDC / 150 mA TPM 05215 +15 VDC / 150 mA –15 VDC / 150 mA TPM 10105 TPM 10105C 5 VDC / 2000 mA TPM 10112 TPM 10112C 12 VDC / 840 mA TPM 10124 TPM 10124C 24 VDC / 420 mA TPM 10212 TPM 10212C TPM 10215 TPM 10512 TPM 10515 10 Watt +12 VDC / 400 mA –12 VDC / 400 mA TPM 10215C +15 VDC / 300 mA –15 VDC / 300 mA TPM 10512C *5 VDC / 1200 mA +12 VDC / 120 mA –12 VDC / 120 mA TPM 10515C *5 VDC / 1200 mA +15 VDC / 100 mA –15 VDC / 100 mA DC input (18 – 72 VDC) and other output voltages on request http://www.tracopower.com * Output floating Page 1 of 9 AC/DC Power Modules TPM Series 5 to 40 Watt Models Ordercode Output Power Output 1 PCB-mounting Chassis mounting with solder pins with screw terminals TPM 15105 TPM 15105C 5 VDC / 3000 mA TPM 15112 TPM 15112C 12 VDC / 1300 mA TPM 15124 TPM 15124C 24 VDC / 600 mA TPM 15212 TPM 15212C TPM 15215 Output 2 Output 3 max. 15 Watt +12 VDC / 600 mA –12 VDC / 400 mA TPM 15215C +15 VDC / 500 mA –15 VDC / 400 mA TPM 15512 TPM 15512C *5 VDC / 1600 mA +12 VDC / 150 mA –12 VDC / 150 mA TPM 15515 TPM 15515C *5 VDC / 1600 mA +15 VDC / 150 mA –15 VDC / 150 mA TPM 30105 TPM 30105C 5 VDC / 6000 mA TPM 30112 TPM 30112C 12 VDC / 2500 mA TPM 30124 TPM 30124C 24 VDC / 1300 mA TPM 30212 TPM 30212C TPM 30215 TPM 30215C TPM 30252 +12 VDC / 1200 mA –12 VDC / 1200 mA +15 VDC / 1000 mA –15 VDC / 1000 mA TPM 30252C *5 VDC / 3000 mA *12 VDC / 1200 mA TPM 30254 TPM 30254C *5 VDC / 3000 mA *24 VDC / 600 mA TPM 30512 TPM 30512C *5 VDC / 3000 mA +12 VDC / 600 mA –12 VDC / 600 mA TPM 30515 TPM 30515C *5 VDC / 3000 mA +15 VDC / 500 mA –15 VDC / 500 mA TPM 40105 1 e t e 201 ol TPMY40112 Obs tinued on TPM 40124 Disc TPM 40105C 5 VDC / 7000 mA TPM 40112C TPM 40124C 30 Watt 40 Watt 12 VDC / 3300 mA 24 VDC / 1800 mA DC input (18 – 72 VDC) and other output voltages on request * Output floating All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 9 AC/DC Power Modules TPM Series 5 to 40 Watt Input Specifications Input voltage range 85 – 264 VAC (100–375 VDC) Input frequency 40 – 440 Hz Input current no load TPM 05 models: TPM 10 models: TPM 15 models: TPM 30 models: TPM 40 models: 115 VAC / 230 VAC 18 mA / 13 mA typ. 18 mA / 18 mA typ. 18 mA / 18 mA typ. 25 mA / 20 mA typ. 20 mA / 17 mA typ. Input current full load TPM 05 models: TPM 10 models: TPM 15 models: TPM 30 models: TPM 40 models: 115 VAC / 230 VAC 100 mA / 60 mA typ. 150 mA / 90 mA typ. 220 mA / 118 mA typ. 430 mA / 240 mA typ. 600 mA / 320 mA typ. External fuse (recommended) 0.5 A slow blow type 1.0 A slow blow type 1.0 A slow blow type 2.0 A slow blow type 3.15 A slow blow type TPM 05 TPM 10 TPM 15 TPM 30 TPM 40 models: models: models: models: models: Output Specifications Voltage set accuracy – Output 1 (main output) ±1 % – Output 2/3 (aux. outputs) ±3 % Regulation – Input variation 0.5 % max. – Load variation (10–90%) Single output models: 0.5 % max. Dual/ triple output models: 0.5 % max. (symmetric load) Minimum load Dual/ triple output models: 10 % (main output) Ripple and noise (pk-pk, 20 Mhz Bandwidth) <2 % of Vout max. Current limitation 105 – 130 % of Iout max., constant current Short circuit protection hiccup mode, indefinite (automatic recovery) Capacitive load 1000 µF (each output) TPM 05xxx only) 4700 µF (each output) all other models) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 9 AC/DC Power Modules TPM Series 5 to 40 Watt General Specifications Temperature ranges – Operating – Case temperature – Derating TPM 5/ 10/ 15 single output models: TPM 5/ 10/ 15 dual output models: TPM 10/ 15 triple output models: TPM 30/ 40 single output models: TPM 30 dual output models: TPM 30 triple output models: – Storage (non operating) –25°C to +70°C max. +95°C max. 2 %/K above 55°C 3 %/K above 55°C 5 %/K above 55°C 2 %/K above 50°C 3 %/K above 50°C 5 %/K above 50°C –45°C to +100°C Temperature coefficient 0.01 %/K Efficiency 55 – 85 % (depending on model) Humidity (non condensing) 95 % rel max. Switching frequency (Puls width modulation PWM) TPM 5 models: 125 kHz typ. TPM 10 / 15 / 30 models: 90 kHz typ. TPM 40 models: 70 kHz typ. Hold-up time – Vin = 115 VAC 50 ms min. – Vin = 230 VAC 50 ms min. I/O isolation voltage (50 Hz 60 sec.) 3‘300 VAC Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >800‘000 h EMI / RFI conducted EN 55022, class B, FCC part 15, level B EMC compliance – – – – – – Electrostatic discharge ESD RF field susceptibility Electrical fast transients/bursts on mainsline Surge Immunity to conducted RF disturbances Immunity to voltage dips, short interruptions and voltage variations IEC/EN 61000-4-2 IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 4 kV / 8 kV 10 V/m 2 kV 2 kV sym. 10 V IEC/EN 61000-4-11 Safety Class II to IEC/EN 60536 Safety standards UL 1950, IEC/EN 60950 Safety approvals – UL/cUL www.ul.com > UL File no.: e188913 Casing material CELANEX 2360 FL (UL94V-0 rated) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 4 of 9 AC/DC Power Modules TPM Series 5 to 40 Watt Outline Dimensions mm (inches) PCB-mounting with solder pins TPM 5 W 50.8 ±0.5 20 ±0.5 4 (2.0 ±0.02) (0.89 ±0.02) (0.16) Pin-Out Pin Single Dual 3.4 22 ±0.4 22 ±0.4 1 AC in AC in (0.13) (0.87 ±0.016) (0.87 ±0.016) 2 AC in AC in 3 –V out –V out 4 no pin Common 5 +V out +V out 5 32 ±0.4 1.26 ±0.016) Bottom view 1 2 15 ±0.4 3.4 ±0.4 (0.6 ±0.016) (0.13 ±0.016) Pin diameter ø 1.0 ±0.1 (0.039 ±0.004) http://www.tracopower.com (0.61 ±0.016) 4 15.4 ±0.4 (2.0 ±0.02) 50.8 ±0.5 3 Weight TPM 5 100 g (0.22 lb) Page 5 of 9 AC/DC Power Modules TPM Series 5 to 40 Watt Outline Dimensions mm (inches) PCB-mounting with solder pins TPM 10/15 W 22.7 ±0.2 10 +0.4 76 ±0.5 (3.0 ±0.02) 5 66 ±0.2 4 5 (0.4) (0.2) (0.4) 3 (0.4) Bottom view (0.4) 35.0 ±0.4 (1.35 ±0.016) 6 2 10.2 10.2 10.2 10.2 5 ±0.016) 7 ±0.4 (0.5 1 (1.0 ±0.016) 25.4 ±0.5 (2.0 ±0.02) 50.8 (0.39 +0.16) (2.6 ±0.008) (0.2) 12.7 ±0.4 (0.89 ±0.008) 38 ±0.5 Self cutting screws ø 3.5 mm (0.14) 8 mm (0.31) depth max. Pin diameter ø 1.0 ±0.1 (0.039 ±0.004) Weight TPM 10 150 g (0.33 lb) TPM 15 150 g (0.33 lb) (1.5 ±0.02) Pin-Out http://www.tracopower.com Pin Single Dual Triple 1 –V out –V out –V out 3 2 No Pin No Pin –V out 1 3 No Pin Common Com. 2/3 4 No Pin No Pin +V out 1 5 +V out +V out +V out 2 6 AC in AC in AC in 7 AC in AC in AC in Page 6 of 9 AC/DC Power Modules TPM Series 5 to 40 Watt Outline Dimensions mm (inches) PCB-mounting with solder pins TPM 30/ 40 W 33 ±0.5 90 ±0.5 (3.5 ±0.02) 4.5 4 (0.18) (0.6) 15.3 4.5 (0.5) (0.5) 3 (0.6) (1.0 ±0.016) 35 ±0.4 25.4 ±0.4 (1.38 ±0.016) (2.21 ±0.016) 56 ±0.4 (2.56 ±0.02) Bottom view 12.7 12.7 1 7 15.3 4.5 (3.19 ±0.016) 2 65 ±0.5 (0.39 +0.16) 81 ±0.4 (0.18) (0.18) (0.89 ±0.02 ) 10 +4 5 6 45 (1.77) Pin diameter ø 1.25 ±0.1 (0.05 ±0.004) Self cutting screws ø 3.5 mm (0.14) 8.0 mm (0.31) depth max. Weight TPM 30 340 g (0.75 lb) TPM 40 340 g (0.75 lb) Pin-Out http://www.tracopower.com Pin Single 1 No Pin 2 3 Dual sym. Dual asym. Triple –V out –V out 1 –V out 3 No Pin No Pin +V out 1 –V out 1 –V out Common No Pin Com. 2/3 4 No Pin No Pin –V out 2 +V out 1 5 +V out +V out +V out 2 +V out 2 6 AC in AC in AC in AC in 7 AC in AC in AC in AC in Page 7 of 9 AC/DC Power Modules TPM Series 5 to 40 Watt Outline Dimensions mm (inches) Chassis mounting with screw terminals Side view Top view 7.5 95 (0.3) (3.74) (ø 1.8) 7 6 ø 4.5 6 39 1 2 3 4 5 (1.54) (2.0 ±0.02) 50.8 ±0.5 (0.24) (0.91±0.008) 23 ±0.2 TPM 10/15 W C 110 ±0.5 (4.33 ±0.02) Connection: wire diameter ø 0.2 – 2.5 mm2 (AWG 24 – 14) Weight TPM 10 C TPM 15 C 200 g (0.44 lb) 200 g (0.44 lb) Pin-Out Pin http://www.tracopower.com Single Dual Triple 1 No Terminal No Terminal 2 No Terminal No Terminal 3 No Terminal –V out Com. 2/3 4 –V out Common +V out 1 5 +V out +V out +V out 2 6 AC in AC in AC in 7 AC in AC in AC in –V out 3 –V out 1 Page 8 of 9 AC/DC Power Modules TPM Series 5 to 40 Watt Outline Dimensions mm (inches) Chassis mounting with screw terminals Side view (1.3) 33 TPM 30/ 40 W C 5.5 4.75 (0.19) 4.2 1 2 3 4 5 (0.17) 6 53 (2.09) (2.56 ±0.02) 65 ±0.5 (0.24) (0.22) Top view 7 6 105.5 (4.15) 115 (4.53) Weight TPM 30 TPM 40 120 ±0.5 (4.72 ± 0.02 380 g (0.84 lb) 380 g (0.84 lb) ) Connection: wire diameter ø 0.2 – 2.5 mm2 (AWG 24 – 14) Pin-Out Pin Single Dual sym. Dual asym. Triple 1 No Terminal No Terminal No Terminal 2 No Terminal No Terminal –V out 1 –V out 1 3 No Terminal –V out +V out 1 Com. 2/3 4 –V out Common –V out 2 +V out 1 5 +V out +V out +V out 2 +V out 2 6 AC in AC in AC in AC in 7 AC in AC in AC in AC in –V out 3 Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. October 11. 2013 Page 9 of 9