TFS190C

Filename: tfs 190c.doc
Version 1.7
VI TELEFILTER
23.10.2007
Filter specification
TFS 190C
1/5
Measurement condition
Ambient temperature TA:
Input power level:
Terminating impedance*:
input
output
°C
dBm
610 Ω // -10.4 pF
560 Ω // -10,3 pF
23
0
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 190 C is the minimum of the pass band attenuation amin. The minimum of the
pass band attenuation amin is defined as the insertion loss ae.The nominal frequency fN is fixed at 190,0 MHz without tolerance. The
values of the pass band ripple and the relative attenuation arel are guaranteed in the whole operating temperature range. The frequency
shift of the filter in the operating temperature range is included in the measurement tolerance scheme.
Data
typ. value
Insertion loss
(Reference level)
ae = amin
8,2
Nominal frequency
fN
-
Pass band
PB
Relative attenuation
arel
fN
fN ±
....
2,0
fN ± 5,0
fN - 12,0
fN + 12,0
max
12
1
dB
-
dB
190
MHz
2
MHz
fN ±
fN ± 2
MHz
MHz ... fN ± 2,5 MHz
MHz ... fN ± 12
MHz
MHz ... fN - 190
MHz ... fN +270
dB
tolerance / limit
max
2
dB
max
5
dB
36
dB
min
32
dB
MHz
40
dB
min
36
dB
MHz
45
dB
min
36
dB
°rms
max
4
°rms
max
10
dBm
Phase variation
fN ± 2,5 MHz
1,2
Input power level
-
Operating temperature range
- 40 °C ... + 85 °C
Storage temperature range
- 55 °C ... + 125 °C
Temperature coefficient of frequency
TCf**
-25
ppm/K
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆fc(Hz) = Tcf(ppm/K) x (T - TA) x fCTA (MHz)
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 190c.doc
Version 1.7
VI TELEFILTER
23.10.2007
Filter specification
TFS 190C
2/5
0
7.28
-1
6.53
-10
-2
5.78
-15
-3
5.03
-20
-4
4.28
-5
3.53
-6
2.78
-35
-7
2.03
-40
-8
1.28
-45
-9
0.53
-25
-30
-50
165.7
170.56
175.42
180.28
185.14
190
194.86
frequency in MHz
199.72
204.58
209.44
-10
187
214.3
187.6
188.2
188.8
189.4
190
190.6
frequency in MHz
191.2
191.8
192.4
delay in µs
0
-5
magnitude in dB
magnitude in dB
Filter characteristic
-0.22
193
Construction and pin connection
(All dimensions in mm)
190C
V43
Date code
1
2
3
4
5
6
7
8
Output
Ground
Input
Ground
Input RF Return
Ground
Output
Ground
Date code:
V
W
X
...
Year + week
2007
2008
2009
50 Ohm Test circuit
L1
C1
3
5
1
SAW
L2
C2
7
L3
2, 4, 6, 8
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 190c.doc
Version 1.7
VI TELEFILTER
23.10.2007
Filter specification
TFS 190C
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
5. ESD
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
ANSI/ESD S20.20-1999, class 1A for HBM
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
3000
min. 300 mm
min. 500 mm
min. 300 mm
!! "#$% " &
Tape (all dimensions in mm)
W
: 12,00
Po
: 4,00
Do
: 1,50
E
: 1,75
F
: 5,50
G(min)
: 0,75
P2
: 2,00
P1
: 8,00
D1(min)
: 1,50
Ao
: 5,30
Bo
: 5,30
Ct
: 9,5
$
.
*+,
-$
'(
#)$#
W 2
Reel (all dimensions in mm)
A
: 330
W1
: 12,4
W2(max) : 18,4
N(min)
: 50
C
: 13,0
A
C
N
W 1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 190c.doc
Version 1.7
VI TELEFILTER
23.10.2007
Filter specification
TFS 190C
4/5
Air reflow temperature conditions
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max.
260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 190c.doc
VI TELEFILTER
Version 1.7
Filter specification
23.10.2007
TFS 190C
5/5
History
Version
Reason of Changes
Name
Date
1.0
Generation of specification according to customer requirements
Herrler
25.07.2001
1.1
change of pinning according to customer proposal
Steiner
20.09.2001
1.2
new Development specification
Change of relative rejection and phase variation in pass band
Dr. Sabah
08.03.2002
1.3
Add of rejection typical values
Dr. Sabah
15.03.2002
1.4
Add of typical values and change to filter specification
Dr. Sabah
26.04.2002
1.5
correct relative attenuation
Dr. Sabah
29.05.2002
1.6
changing typical values of insertion loss, relative attenuation
and temperature coefficient of frequency
Pfeiffer
07.08.2002
1.7
- operating temperature range changed according customer requirements
- add of filter characteristics
- air reflow temperature conditions modified
Pfeiffer
23.10.2007
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.