TFS1555

Filename: tfs 1555.doc
Version 1.3
Vectron International
30.04.2010
Filter specification
TFS 1555
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance:
Input:
Output:
23
0
°C
dBm
50
50
Ω
Ω
Characteristics
Remark:
The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1555 MHz without any tolerance or
limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating
temperature range is included in the production tolerance scheme.
Data
typ. value
Insertion loss
ae
3,7
Nominal frequency
fN
-
PB
-
Passband
Pass band ripple
dB
tolerance / limit
max.
4,0
dB
1555,0
fN
±
30
MHz
MHz
1,6
dB
max.
2,0
dB
3,7
dB
max.
4
dB
32
28
dB
dB
min.
min.
25
25
dB
dB
10
ns
max.
18
ns
dB
min.
aabs
Absolute attenuation
1525
MHz
... 1585
MHz
0,3
1650
MHz
MHz
... 1480
... 2500
MHz
MHz
Group delay ripple within PB
Return loss within PB
9,5
Input power level
-
max.
10
Permissible DC voltage
-
max.
0
Operating temperature range
OTR
Storage temperature range
Temperature coefficient of frequency
TCf **
8 *
dB
dBm
V
-
- 40 °C ... + 85 °C
-
- 55 °C ... + 125 °C
-72
ppm/K
-
*) at ambient temperature
**) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz)
Generated:
Checked / Approved:
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 1555.doc
Version 1.3
Vectron International
30.04.2010
Filter specification
TFS 1555
2/5
0
0.05
-2
0.045
-12
-4
0.04
-18
-6
0.035
-24
-8
0.03
-10
0.025
-12
0.02
-42
-14
0.015
-48
-16
0.01
-54
-18
0.005
-30
-36
-60
10
260
510
760
1010
1260
1510
frequency in MHz
1760
2010
2260
-20
2510
1480
1500
1520
1540
1560
frequency in MHz
1580
1600
1620
delay in µs
0
-6
magnitude in dB
magnitude in dB
Filter characteristic
0
Construction and pin connection
(All dimensions in mm)
5
6
4
1,2 Max.
G55
● A18
2
1
1
2
3
4
5
6
Ground
Input
Ground
Ground
Output
Ground
Date code:
A
B
C
...
Year + week
2010
2011
2012
3
Date code
3
0,75
3,0 +/-0,15
0,30X0,30
1
0,6
6
4
0,6
50 Ω Test circuit
L1
2
5
L2
SAW
1, 3, 4, 6
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 1555.doc
Version 1.3
Vectron International
30.04.2010
Filter specification
TFS 1555
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per
plane, 3 planes;
DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
5. ESD
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: three times max.;
for temperature conditions, see page 4: "Air reflow temperature conditions"
ANSI/ESD S20.20-1999, class 1A for HBM
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
9000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
Tape (all dimensions in mm)
W
: 8,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 3,50 ± 0,05
G(min)
: 0,75
P2
: 2,00 ± 0,05
P1
: 4,00 ± 0,1
D1(min)
: 1,50
Ao
: 3,25 ± 0,1
Bo
: 3,25 ± 0,1
Ct
: 5,5 ± 0,1
P1
Date Code
Po
Do
P2
W
G
Ct
Bo
F
G
E
t
Ko
Typ
PIN Marker
D1
Ao
W 2
Reel (all dimensions in mm)
A
: 330
W1
: 8,4 +1,5/-0
W2(max) : 14,4
N(min)
: 50
C
: 13,0 +0,5/-0,2
A
C
N
W 1
The minimum bending radius is 45 mm.
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 1555.doc
Version 1.3
Vectron International
30.04.2010
Filter specification
TFS 1555
4/5
Air reflow temperature conditions
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 1555.doc
Vectron International
Version 1.3
Filter specification
30.04.2010
TFS 1555
5/5
History
Version
Reason of Changes
Name
Date
1.0
- Generation of development specification
Martens
18.11.2004
1.1
- Add typical values and filter characteristics
- Change stability characteristics
- Generation of filter specification
Noack
13.05.2005
1.2
- Change stability characteristics
Strehl
31.03.2008
1.3
- Extend storage temperature range
Noack
30.04.2010
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.